Tools > Pneumatic Power Tools

MPN: 6151919427Specifications Air Consumption 12.5 CFM Air Inlet 1/4" NPT Sound Level (dBA) 82 Drive 3/8" No Load RPM 275 Torque range 5-27 ft-lbs....

MPN: 404136 The tool-free, rotating exhaust-direction dial allows users to direct the exhaust to either the front or handle of the tool The super h...

MPN: 2456-20 Features a 3/4" low-profile head design for work in the tightest of spaces and engine bays Powerful 12-volt motor that delivers up to ...

MPN: 6151922780Specifications Air Consumption 29 CFM Air Inlet 1/4" NPT Sound Level (dBA) 89 Chuck Size 1/4" No Load RPM 2100 Clutch Type Positive ...

MPN: T022708 Fast change, 3/8" square drive spindle Improved ratchet head Reverse button Use as hand ratchet for final torque up or to break fasten...

MPN: 8941071500 Aluminum body Piston air-cushioned on return stroke 1/4" (NPTF) air inlet Specifications Air Consumption 25 CFM Air Inlet 1/4" Soun...

MPN: 8941071110 Aluminum body Piston air-cushioned on return stroke 1/4" (NPTF) air inlet Specifications Air Consumption 25 CFM Air Inlet 1/4" Soun...

MPN: T022970 Fast change, 1/2" square drive spindle Improved ratchet head Reverse button Use as hand ratchet for final torque up or to break fasten...

MPN: 404203 A powerful heavy duty industrial flux chipper Light-weight compact design allows maximum operator control and access to jobs in hard-to...

MPN: 107XPASpecifications Air Consumption 4 CFM Air Inlet 1/4" NPTF Sound Level (dBA) 94.4 Drive 3/8" No Load RPM 160

MPN: 2457-20 Features a 3/4" low-profile head design for work in the tightest of spaces and engine bays Powerful 12-volt motor that delivers up to ...

MPN: 119MAX Great for exhaust and front-end jobs, general bolt cutting, pin driving and body shearing work Optimized for the vehicle repair industr...

MPN: 172L The adjustable bayonet-type needle housing lock allows for easy adjustment without special tools Feature a rubber-faced throttle valve to...

MPN: 3940B2TI Thanks to the bronze end-plate and a corrosion preventative treatment, this series is corrosion and wear resistant, making it great f...

MPN: 285B-6The rocking dog's combination of high inertia and low BPM means this tool can deliver a powerful blow with little airSpecifications Air...

MPN: 47802 Kevlar® phenolic vanes for longer life Lightweight ergonomic design for greater comfort and control One-piece spindle keeps all rotating...

MPN: 6151933511Low noise and vibrationSpecifications Air Consumption 8 CFM Air Inlet 1/4" NPT Sound Level (dBA) 81 No Load RPM 12000 Disk Diameter ...

MPN: 6151740230 For industrial use Powerful Chisel not included Specifications Air Consumption 3 CFM Air Inlet 1/4" NPT BPM 3800 Stroke Length 1-1/...

MPN: 261-TK2 For use with 2161XP impact wrench Includes: Air motor vanes, O-rings, Gaskets, Bearing, Seats, Seals, Spring

MPN: AB45194

MPN: AB80515 DISC PAD FACE PLATES Disc Pad Face Plates: Backup plates for fibre discs 3M disc pad face plates are colour coded by density; ribbed p...

MPN: AB81734 DISC PAD FACE PLATES Disc Pad Face Plates: Backup plates for fibre discs 3M disc pad face plates are colour coded by density; ribbed p...

MPN: AB81733 DISC PAD FACE PLATES Disc Pad Face Plates: Backup plates for fibre discs 3M disc pad face plates are colour coded by density; ribbed p...

MPN: 404443 Double-reduction planetary gear system gives low speed and high torque for heavier drilling jobs Variable-speed dial and feather trigge...

MPN: 403212 For maximum performance we recommend 90 PSI air pressure Dual orbital action provides a swirl free finish Paddle throttle and vinyl lin...

MPN: 65967 Captures extracted sanding dust Easily connects to 3M Xtract™ Random Orbital Sanders with self-generated vacuum to remove dust from the ...

MPN: 8941074100 Burrs are easily changeable, allowing the operator to use only one wrench thanks to the new spindle lock system Good surface grip a...

MPN: 8941074060 Spindle lock system removes the need to use 2 spanner wrenches to change the carbide burr, allowing for a high application coverag...

MPN: NZ1 Excellent power for effectively removing seam sealer, paint, two-sided adhesive molding tape and decal material Tool using wire wheel dupl...

MPN: 11109 Provides belt support Files are top facing, cork based and have a pressure sensitive adhesive (PSA) back For heavy deburring and polishi...

MPN: AB20331 Grip-from-the-top design helps lessen operator fatigue Precision-balanced The work face easily gets into corners and angles to deliver...

MPN: AB20354

MPN: AB20325 Precision-balanced steel workings run smoothly with less vibration, ideal for high production industrial environments Improved durabil...

MPN: 12LF281-36 Composite housing Ergonomic and balanced design minimizes operator fatigue Rear exhaust Specifications Air Consumption 38 CFM Air I...

MPN: T012644Specifications Air Consumption 0.28 CFM Air Inlet 1/4" NPT Sound Level (dBA) 90 Blows per minute 13500 Chisel Rivet Set Shank" 1/8" Sha...

MPN: 6151957222Specifications Air Consumption 21 CFM Air Inlet 1/4" NPT Sound Level (dBA) 84 Wheel Size 4-1/2" No Load RPM 12000 Spindle Thread 5/8...

MPN: 302BEasily reach tight workspaces with a right angle configuration and a compact, straight optionSpecifications Air Consumption 6 CFM Air Inle...

MPN: 8941071200Specifications Air Consumption 15.5 CFM Air Inlet 1/4" NPT Sound Level (dBA) 110 BPM 4800 Stroke Length 1-9/50" Bore 1-1/8" Shank 1/...

MPN: P054177Replacement Stylus

MPN: T024587 Twin clutch increases ultimate torque for smooth operation under heavy loading Oil bath clutch Specifications Air Consumption 16 CFM A...

MPN: 8941077220 Butterfly forward/reverse throttle Rocking dog clutch for smooth operations and durability Four positive power settings Easy maneuv...

MPN: 8941008790 Compact, low profile head for drilling in confined areas Reverse valve for simple directional changes Rear exhaust directs air away...

MPN: 6151959104 General Maintenance Applications Easy to handle Ideal for limited space applications Quiet and lightweight Silencer hose included S...

MPN: 15028No Platen due to off set design Grind radiuses, slack polish or Off set for slack polishingSpecifications Belt Size 1/4" x 5/16", 1/2" x ...

MPN: 11206 Standard on models TGY737 and TGY741 For Air and electric Models - 4" to 17" Workable Reach Specifications Belt Size" 5/8 or 3/4 x 18 Co...

MPN: 11218 Standard Arm on TGY725 4" to 14" Workable Reach (Includes bearing and shaft) Specifications Belt Size" 1/2 x 24 Contact Wheel Ass. 11078...

MPN: 59040 Palm-style grip Colour-coded composite lever (identifies orbit size) Low sound levels One-piece speed control dial Custom engineered com...

MPN: 59035 Colour-coded composite lever (identifies orbit size) Low sound levels One-piece speed control dial Custom engineered composite cylinder ...