Tools > Punches, Dies, Hooks & Scribes
Filters
- Aligning Punch (1)
- Arch Punch (12)
- Awl Scratch Punch (1)
- Centre Punch (24)
- Drift Punch (9)
- Drive Pin Punch (18)
- Gasket Cutter (6)
- Hand Scribe (11)
- Hole Punch (1)
- Hook Scribe (4)
- Letter Punch (17)
- Nail Set Punch (3)
- Number Punch (18)
- Pin Punch (24)
- Prick Punch (2)
- Probe & Hook Set (6)
- Punch & Chisel Set (5)
- Punch Set (19)
- Starting Punch (1)
- Straight Hand Probe (1)
Scriber with Magnet - UAK142
Aurora ToolsThe scriber is the perfect tool for making sharp accurate lines on hardened materials End cap magnet picks up stray metal shavings Works easily on...
View full detailsM3 Rotary-Style Gasket Cutter - AX7000
AllpaxMPN: AX7000 Heavy-duty, cast iron frame with 7" throat Precision steel components Crank operated Durable, heat-treated tool steel, rotary cutting d...
View full detailsPick Hook Tip - 86803
Gray ToolsMPN: 86803Specifications Overall Length 10" Tip Material Steel Blade Length 6"
Brass Drift Punch 1/2" - CBR7
Gray ToolsMPN: CBR7 Knurled body provides superior grip and hold Ideal for use in non-marring applications Limited lifetime warranty Meets ANSI standards Spe...
View full detailsCenter Punch 1/2" - C35A
Gray ToolsMPN: C35A Heat-treated to provide a hard working end and softer striking end to avoid chipping High polished and lacquered working end with royal b...
View full detailsCenter Punch 1/4" - C33A
Gray ToolsMPN: C33A Heat-treated to provide a hard working end and softer striking end to avoid chipping High polished and lacquered working end with royal b...
View full detailsFixed Two Point Scribes - 80
General ToolsMPN: 80 Hardened steel needle points are fixed to knurled body One straight point and one 90° bent point 8 7/16" long Specifications Overall Length...
View full detailsTwo Point Scriber - 380B
General ToolsMPN: 380B Includes: (1) Short straight point, (1) Short 90° point For use on metal, glass, plastics and ceramics Aluminum body with knurled finger ...
View full detailsThree Point Scriber - 380A
General ToolsMPN: 380A Includes: (1) Short straight point, (1) Short bent point, (1) Long bent point For use on metal, glass, plastics and ceramics Aluminum bod...
View full detailsMini Pocket Scriber - 83
General ToolsMPN: 83 For use on metal, glass, plastics and ceramics Aluminum body with knurled finger grip and hardened and centerless ground steel point Point ...
View full detailsPocket Scriber - 81
General ToolsMPN: 81 For use on metal, glass, plastics and ceramics Aluminum body with knurled finger grip and hardened and centerless ground steel point Point ...
View full detailsLightweight Automatic Centre Punches - 87
General ToolsMPN: 87 One-hand spring impact operation, no hammer needed Lightweight aluminum body with long wearing alloy steel parts Spring tension adjusts for...
View full detailsAutomatic Center Punch 5/8" - 77
General ToolsMPN: 77 One-handed spring impact operation, no hammer needed Spring tension adjusts for light or heavy strokes and marking Lightweight aluminum bod...
View full detailsMini Heavy-Duty Automatic Center Punch 1/2" - 79
General ToolsMPN: 79 One-handed spring impact operation, no hammer needed Spring tension adjusts for light or heavy strokes and marking Specifications Point Dia...
View full detailsHeavy Duty Punch - Automatic Centre - 78
General ToolsMPN: 78Specifications Point Diameter 2/25" Overall Length 6" Material Steel
Scribes - 422-KGSC
King Tool, Inc.MPN: 422-KGSC Giant Scribe Features machined aluminum handles, diamond knurling for comfortable and sure grip, precision ground tungsten carbide sc...
View full detailsCentre Punch 1/4" - 82269
GearwrenchMPN: 82269 Ideal for marking center lines and pilot drill locations Striking end is softened and tapered to reduce chipping Ground surface finish o...
View full detailsExtension Gasket Cutters - Gasket Cutter Kit (Imperial) - No. 4 - AX6040
AllpaxMPN: AX6040 Cuts 1/4" to 49" in diameter Hefty brass cutting head slides easily over a variety of gasket materials Modular extension design allows ...
View full detailsExtension Gasket Cutters - Gasket Cutter Kit (Imperial) - No. 3 - AX6030
AllpaxMPN: AX6030 Cuts 1/4" to 37" in diameter Hefty brass cutting head slides easily over a variety of gasket materials Modular extension design allows ...
View full detailsExtension Gasket Cutters - Gasket Cutter Kit (Imperial) - No. 1 - AX6010
AllpaxMPN: AX6010 Cuts 1/4" I.D. to 13" in diameter Hefty brass cutting head slides easily over a variety of gasket materials Modular extension design al...
View full detailsRevolving Punch Pliers 5/64", 3/32", 7/64", 1/8", 5/32",3/16" (2.0, 2.5, 3.0, 3.5, 4.0, 4.5m - 72
General ToolsMPN: 72 Ideal for making miniscule punch holes that would not be practical with a single-style punch The revolving turret offers six distinct punch...
View full detailsScratch Awl - 818
General ToolsMPN: 818 Contoured and fluted hardwood handle Alloy steel blade running through handle is fastened to plated steel ferrule and cap Specifications B...
View full detailsCentering Punch 3/8" - 806
General ToolsMPN: 806 Countersunk end ensures starting hole is centered in hardware screw hole Hardened steel pin Specifications Point Diameter 3/8" Stock Size ...
View full detailsDrive Pin Punch - 75D
General ToolsMPN: 75D Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 5/32" Overall L...
View full detailsDrive Pin Punch - 76B
General ToolsMPN: 76B Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/16" Overall L...
View full detailsDrive Pin Punch - 76A
General ToolsMPN: 76A Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 1/8" Overall Le...
View full detailsHollow Steel Punch - 1280J
General ToolsMPN: 1280J Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...
View full detailsHollow Steel Punch - 1280M
General ToolsMPN: 1280M Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...
View full detailsHollow Steel Punch - 1280-O
General ToolsMPN: 1280-O Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic,...
View full detailsHollow Steel Punch - 1280P
General ToolsMPN: 1280P Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...
View full detailsDrive Pin Punches 5/16" - 52585
StarrettMPN: 52585 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/1...
View full detailsDrive Pin Punches 1/4" - 52584
StarrettMPN: 52584 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/4...
View full detailsDrive Pin Punches 3/16" - 52582
StarrettMPN: 52582 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 3/1...
View full detailsDrive Pin Punches 5/32" - 52581
StarrettMPN: 52581 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/3...
View full detailsDrive Pin Punches 1/8" - 52580
StarrettMPN: 52580 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/8...
View full detailsDrive Pin Punches 3/32" - 52579
StarrettMPN: 52579 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 3/3...
View full details7-Piece Centre Punches With Square Shank - S264WB
StarrettMPN: S264WB Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper a...
View full detailsCentre Punch with Square Shank 7/16" - 51284
StarrettMPN: 51284 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punch with Square Shank 3/8" - 51281
StarrettMPN: 51281 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 3/8" - 51185
StarrettMPN: 51185 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 5/16" - 51184
StarrettMPN: 51184 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 1/4" - 51183
StarrettMPN: 51183 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 3/16" - 51182
StarrettMPN: 51182 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punch for Machine Shop & Motor Service Work 1/8" - 51181
StarrettMPN: 51181 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsCentre Punches With Round Shanks - 50487
StarrettMPN: 50487 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsCentre Punch with Round Shank - 50486
StarrettMPN: 50486 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsCentre Punch with Round Shank - 50485
StarrettMPN: 50485 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsAutomatic Centre Punch - 50120
StarrettMPN: 50120 Rugged automatic punch with all-steel handle and parts Internal mechanism automatically strikes a blow when downward pressure is applied...
View full details