Tools > Threadlocking & Retaining

MPN: 195900 Used to lock and seal fine threaded nuts, bolts, and studs in a wide variety of applications, as well as to seal porosity in welds, cas...

MPN: 195896 Withstands temperatures to 230°F For set screws, adjustment screws, calibration screws, meters and gauges Parts can be separated using ...

MPN: 228208Ideal for locking and sealing large coarse threaded nuts, bolts, and studsSpecifications Format 250 ml Container Type Bottle Strength Hi...

MPN: 231101 Ideal for bearings and for close fitting parts High strength retaining compound High oil tolerance Specifications Net Volume 250 ml Con...

MPN: 544420 Low viscosity Fluoresces to allow quality control and inspection Prevents unwanted movement, loosening, leaks and corrosion Resistant t...

MPN: 1330902 Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses Works on all metals, including passive substrates, e.g. ...

MPN: 303379 Designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools Recommended for us...

MPN: 232331 High temperature and high strength threadlocker Fast fixture time Oil resistant Specifications Format 250 ml Container Type Bottle Stre...

MPN: 135533 General purpose adhesive High strength and very low viscosity Ideal for close fitting press and slip fits Specifications Net Volume 250...

MPN: 135521 Ideal for large diameter components High temperature adhesive Specifications Net Volume 250 ml Container Type Bottle Fixture Time 60 mi...

MPN: 1835925 Ideal for slip fit parts with larger gaps Cures on metal High temperature resistance Specifications Net Volume 250 ml Container Type B...

MPN: 1134607 Locks and seals threaded fasteners over 7/8" in diameter Reduces friction while allowing proper clamp load CFIA approved Specification...

MPN: 135516 High Strength retaining compound Slow cure speed allows for readjustment of parts during assembly Specifications Net Volume 50 ml Conta...

MPN: 1835920 Ideal for clearance and interface fit parts Excellent performance for dynamic, axial and radial loads Works through contaminants such ...

MPN: 1835922 Ideal for clearance and interface fit parts Excellent performance for dynamic, axial and radial loads Works through contaminants such ...

MPN: 303440 Lock and seal threaded fasteners in applications that require continuous temperature resistance up to 650 °F (range: -65 °F to 650 °F o...

MPN: 1372603 No mess, no waste, the first threadlocker in tape form Same reliability and performance as Loctite® removable grade threadlocking liqu...

MPN: 303441 Lock and seal threaded fasteners in applications that require continuous temperature resistance up to 650 °F (range: -65 °F to 650 °F o...

MPN: 135520Industrial Quality Loctite productsSpecifications Net Volume 50 ml Container Type Bottle Fixture Time 60 min. Full Cure Time 24 hrs. Col...

MPN: 233546 For cylindrical parts that require disassembly Ideal for gap distances up to 0.008" Fixtures in 20 minutes, full in 24 hrs. Provides a ...

MPN: 196508 Suitable for fasteners between 1/4" and 3/4" (6 to 20 mm) diameters Resists oil and mild surface contamination at continuous temperatur...

MPN: 209765 Creamy, non-running adhesive/sealant Repairs worn machine parts Restores correct fit to mating assemblies Ideal for gap distances up to...

MPN: 640470 Formulated with excellent oil resistance for rigid flange sealing Ideal for on-the-spot repairs For use on a variety of metal surfaces,...

MPN: 231121 For cylindrical parts that require disassembly Ideal for gap distances up to 0.008" Fixtures in 20 minutes, full in 24 hrs. Provides a ...

MPN: 135335 Ideal for fastener diameters of 1/4" (6 mm) and smaller Controlled lubricate for accurate clamp loads Parts can be separated using hand...

MPN: 135334 Ideal for fastener diameters of 1/4" (6 mm) and smaller Controlled lubricate for accurate clamp loads Parts can be separated using hand...

MPN: 826036Industrial Quality Loctite productsSpecifications Format 9 g Container Type Stick Strength High Fixture Time 5 min. Full Cure Time 24 hr...

MPN: 135333 Ideal for fastener diameters of 1/4" (6 mm) and smaller Controlled lubricate for accurate clamp loads Parts can be separated using hand...