GPI (504)

110032-501. Union Ring Gasket for M-150S, M-180S & M-240S 12V & 24V Electric Gear Pump.

Fuel Extension Suction Pipe is used for HP-100, DP-20 & RP-10 Fluid Transfer Hand Pumps.

GPI Power Cord Assembly with Strain Relief Connector Easy to install dome nut strain relief connector with NPT threads. Prevents kinking, twisting ...

GPI 110504-1, conversion and overhaul kit for use with electric fuel pumps. Includes (2) Gears, Drive Key and Replacement Seals, Motor Shaft, Poppe...

GPI 110529-01, 3/4 in. x 14 ft. (4.27 m) hose kit for use with fuel transfer pumps.The GPI Hose Kit (110529-01) is a 3/4 in. x 14 ft. (4.3 m) hose ...

GPI 110529-02, 3/4 in. x 12 ft. (3.66 m) hose kit for use with fuel transfer pumps.The GPI Hose Kit (110529-02) is a 1 in. x 12 ft. (3.7 m) hose. T...

1IN x 20-ft Fuel hose with static wire perfect for use with AC or DC electric pumps and hand pumps. Durable grounded hose with static wire - preven...

Automatic Nozzle Hook is used for M-150S, M-180S & M-240S Fuel Transfer Pumps.

GPI 110540-03 Diesel Nozzle Hook Kit is used for M-3020 Fuel Transfer Pumps.

Bung Adapter Bushing is used for EZ-8 Fuel Transfer Pumps.

Wet Seal Kit, Includes Motor Shaft Seal and O-Rings for Strainer Coverplate, Gear Coverplate and Bypass Poppet.

110907-1 is a Gear Kit used for M-150S-EM, M-150S, M-180S & M-240S Pumps. The kit includes two gears & drive key.

The GPI Electric Fuel Pump Bung Adapter Kit (No.110909) includes a tank bung adapter bushing and an NBR rubber union ring gasket. GPI 110909-1, bun...

110927-05 Gear Coverplate Kit is used for M-180S Fuel Transfer Pumps.

GPI 119200-551 12-Volt Motor is used for M-150S-EM, M-150S Fuel Transfer Pumps.

GPI 126530-01 Replacement Bezel Kit is used for MR 5-30 meters, includes Hardware.

GPI 129000-1, 1 pt/stroke manual DEF transfer hand pump has 3/4 in. dispensing hose barb inlet and 1 in. dispensing hose barb outlet connection use...

GPI 129003-1, 8 GPM (30 L/min) /90 revolutions manual fuel transfer hand pump use with diesel, petroleum based fluids, kerosene, light oil and hydr...

GPI 129300-01, 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.The GPI Particulat...

GPI 129300-02, 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.The GPI Water and ...

Clean fuel is essential to the health and performance of your equipment. 10 micron nominal filtration removes rust, dirt and dust that can damage y...

GPI 129340-05 is a 2 micron Bio-Tek® water & particulate filter. It delivers up to 40 GPM (151 L/min), with 1 1/2 - 16 UNF mounting thread.The ...

129340-06. 30 Micron Particulate Filter (40 GPM). It delivers up to 40 GPM (151 LPM). 1 1/2 - 16 UNF mounting thread.

Clean fuel is essential to the health and performance of your equipment. 10 micron nominal filtration removes rust, dirt and dust that can damage y...

Use GPI 3/4-inch NPT Cast aluminum filter adapter to complete your filter installation setup on your fueling system. Protect your pump today with G...

20 to 40 GPM (76 to 151 L/min). Easily attach a filter, meter or both to build your own custom system. Simple four-bolt connections can be mounted ...

GPI Particulate Filter Kit for electric fuel transfer pumps. It helps remove dirt, dust, rust, and other common fuel contaminants to protect your f...

133078-1 Switch Mounting Bracket is used for fuel transfer pump.

1'' NPT Male Inlet Fitting is used for M30 & QM40 Meter.

GPI 162205-01 1" Outlet Adaptor 90 deg. for M30 Meter. Does not include hardware

GPRO® V25 Series. 12V 25GPM MODULAR FUEL TRANSFER PUMP. 170000-02 V25-012MD. VOLTAGE: 12V (DC). NOZZLE TYPE: 1 in. FNPT Inlet, Manual Shut-off, Die...

GPI 902006-555 is a Circuit Breaker Switch for 12 VDC fuel transfer pump.

GPI 906005-67, filter adapter for use with 30 GPM, 40 GPM fuel transfer pumps has 1 in. NPT connection.Use the GPI Aluminum Adapter (906005-67) wit...