Clips & Fasteners

Description : Hood & Trunk Moulding Retaining Clip. Type : Single Head. Bottom Head Diameter : 12MM. Top Head Diameter : NONE. Stem Length : 9M...

Description : Weatherstrip Retainer. Type : Double Head. Bottom Head Diameter : 1/4 x 21/32". Stem Diameter : 1/4". Stem Length : 15/32". Material ...

Description : Door Trim Panel Retainer. Type : Triple Head. Color : White. Bottom Head Diameter : 1/2". Top Head Diameter : 1/4 x 29/64". Stem Diam...

Description: Interior Trim Retainer. Type: Single Head. Color: Black. Bottom Head Diameter: 26MM. Top Head Diameter: None. Stem Diameter: 8MM. Stem...

Description : Engine Mount Heat Shield Retainer. Type : Single Head. Color : Black. Bottom Head Diameter : 1/2". Top Head Diameter : None. Stem Dia...

Description : Splash Shield, Seat Cushion & Spare Tire Retainer. Type : Push-Type with Closed End. Head Diameter : 1". Stem Length : 7/8". Hole...

Description : Body Retainer. Type : Push-Type with Closed End. Head Diameter : 11/16". Stem Length : 7/8". Hole Size : 1/4". Color : Black. OEM Num...

Description : Trim Panel Retainer. Type : Single Head. Color : Black. Bottom Head Diameter : 1/2". Top Head Diameter : None. Stem Diameter : 9/32"....

Description : Hood Insulation Retainer. Type : Retainer. Head Diameter : 2". Stem Length : 3/4". Stem Diameter : 5/16". Material : Nylon. Color : B...

Moulding Clips are used for attaching mouldings on doors, quarter panels, trunks, etc. They are made of nylon and are sometimes attached with a riv...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

HYUNDAI MOULDING CLIP WITH SEALER Description : Moulding Clip. Stem Length : 10MM. Material : Nylon. Colour : White. Top Head Size : 10 x 12MM. Bot...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

OEM Automotive Body Hardware, Made for GM: 11518017; Ford: W708530-S300. Fits in Hole Size- 8mm Head Diameter- 20mm

NISSAN & TOYOTA PUSH-TYPE RETAINER Description : Engine Under Cover, Bumper, Wheel Apron & Hood Trim Push-Type Retainer. Head Diameter : 18...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

Retainers are used for retaining door panels, interior trim, hood insulation, weatherstrip, splash guards, headliners and various fascia. Although ...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

Description : Weatherstrip Retainer. Type : Double Head. Bottom Head Diameter : 3/16 x 1/2". Stem Diameter : 3/16". Stem Length : 5/8". Material : ...

Description : Front & Rear Bumper Push-Type Retainer. Type : Screw-Type with Open End. Head Diameter : 20MM. Stem Length : 25MM. Drive Type : P...

Description : Push-Type Retainer. Type : Push-Type with Drive Pin. Head Diameter : 15MM. Stem Length : 8MM. Hole Size : 6.3MM. Color : Black. OEM N...

Description : Push-Type Retainer. Type : Screw-Type with Closed End. Head Diameter : 18MM. Stem Length : 21MM. Hole Size : 8MM. Color : Black. OEM ...

Description : Push-Type Retainer. Type : Push-Type with Drive Pin. Head Diameter : 12MM. Stem Length : 8MM. Hole Size : 6MM. Color : Black. OEM Num...

Description : Push-Type Retainer. Type : Push-Type with Open End. Head Diameter : 5/8". Stem Length : 17/32". Hole Size : 1/4". Color : Black. OEM ...

Description: Hood Insulation Retainer. Type: Retainer. Head Diameter: 1-21/32". Stem Length: 3/4". Stem Diameter: 5/16". Material: Nylon. Color: Black

Description: Radiator Overflow Bottle/Windshield Washer Bottle Retainer. Type: Push-Type with Open End. Head Diameter: 21/32". Stem Length: 9/16". ...

Description : Rear Bumper Cover Push-Type Retainer. Type : Push-Type Retainer. Head Diameter : 18MM. Stem Length : 28MM. Hole Size : 9MM. Color : B...

Description : Front Bumper Fascia Push-Type Retainer. Type : Screw-Type with Closed End. Head Diameter : 20MM. Stem Length : 20MM. Drive Type : Phi...

Description : Front & Rear Bumper Push-Type Retainer. Type : Screw-Type with Open End. Head Diameter : 20MM. Stem Length : 15MM. Hole Size : 10...

Description: Inner Fender Push-Type Retainer. Type: Screw-Type with Closed End. Head Diameter: 25/32”. Stem Length: 23/32”. Drive Type: Phillips. H...

Description: Hood Insulation Retainer. Type: Single Head. Color: Black. Bottom Head Diameter: 1-3/8". Top Head Diameter: None. Stem Diameter: 5/16"...

Description : Hood Insulation Retainer. Type : Single Head. Head Diameter : 1-3/4". Stem Length : 3/4". Stem Diameter : 3/8". Material : Nylon. Col...

Description : Fascia Retainer. Type : Retainer. Color : Black. Top Head Diameter : 7/16". Stem Diameter : 7/32". Stem Length : 1/2". Material : Nyl...

Description : Fascia Retainer. Type : Push-Type with Closed End. Head Diameter : 18MM. Stem Length : 23MM. Hole Size : 7MM. Color : Black. OEM Numb...

Description : Rod End Clip. Material : Nylon. Rod Size : 4MM. Hole Size : 6MM. OEM Number : (992780405)

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

GM PUSH-TYPE RETAINER - BLACK NYLON Description : Cowl Vent & Fender Retainer. Type : Push-Type with Closed End. Head Diameter : 20MM. Stem Len...

KIA PUSH-TYPE RETAINER BLACK NYLON Description : Bumper, Fender, Grille, Interior & Exterior Trim & Pillar Push-Type Retainer. Type : Screw...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

GM & CHRYSLER TRIM PANEL RETAINER Description : Trim Panel Retainer. Type : Single Head. Colour : Black. Bottom Head Diameter : 3/4". Top Head ...

Description : Shroud Retainer. Type : Single Head. Color : Black. Bottom Head Diameter : 15MM. Top Head Diameter : None. Stem Diameter : 5.5MM. Ste...

Rod End ClipNylonHolds 4mm RodsSnaps Into 6mm HoleReplaces Mazda: 9927-80-40525 Per Package

020-680; Assortments 1Pcs

Moulding Clips are used for attaching mouldings on doors, quarter panels, trunks, etc. They are made of nylon and are sometimes attached with a riv...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

They work by pushing in the center pin which spreads the prongs. They are used for retaining bumper guards, various fascia, splash shields, shrouds...

KIA PUSH-TYPE RETAINER BLACK NYLON Description : Bumper, Fender, Grille, Interior & Exterior Trim & Pillar Push-Type Retainer. Type : Screw...