Screws

Screw Size: M4.2-1.41, Length: 20MM, Point Type: A/AB, Head Style: Hex, Sems, Washer Diameter: 20MM, Across Flats: 7MM, Finish: Black Phosphate

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Rivets are used for attachment in many different areas. The critical dimensions are the diameter of the rivet body and the grip range or panel thic...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Washer Head is a screw/bolt with the washer permanently attached to it. Also called flanged head. The washer head eliminates the need for a separat...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Nylon Nuts are used with metal tapping screws throughout the car (interior & exterior) for attachment. As a tapping screw is installed, it cuts...

Rivets are used for attachment in many different areas. The critical dimensions are the diameter of the rivet body and the grip range or panel thic...

Spin Lock Nut is a hex flange nut with serrations under the flange for locking purposes. The serrations or grooves dig into the bearing surface dur...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Head Style- Phillips Oval Screw Size- No.8 Length- 1-1/4 in. Point Type- A/AB Finish- Black Oxide Head Size- No.6 Screw Type- TappingOE Numbers- 90...

U-Nuts are used the same as extruded U-nuts, on the edge of a panel, but do not posses the same “retention power” due to the lack of the extruded f...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Screw Size : M4.2-1.41. Length : 20MM. Point Type : A/AB. Head Style : Phillips Washer. Washer Head Diameter : 11MM. Finish : Black Oxide. OEM Numb...

Screw Size : No.8. Length : 3/4". Head Style : Phillips Pan, SEMS. Point Type : A/AB. Washer Diameter : 1/2". Finish : Black Phosphate

Screw Size : No.8. Length : 1". Head Style : Phillips Oval, SEMS. Point Type : A/AB. Head Size : No.6. Washer : Countersunk. Finish : Chrome

Screw Size : No.8. Length : 1/2". Head Style : Phillips Oval. Point Type : A/AB. Head Size : Std. Finish : Zinc

Screw Size: No.8, Length: 1/2", Head Style: Hex Washer, Point Type: No.2 Drill, Hex Size: 1/4", Finish: Zinc

Screw Size : No.8. Length : 1/2". Head Style : Phillips pan. Point Type : A/AB. Finish : Zinc

Screw Size : No.8. Length : 11/16". Head Style : Phillips Oval, SEMS. Point Type : A/AB. Head Size : No.6. Washer : Flush. Finish : Black Oxide

PHILLIPS FLAT WASHER HD T.S.No.10 X 3/4 BLACK. Screw Size : No.10. Length : 3/4". Head Style : Phillips Flat Top Washer. Point Type : A/AB. Finish ...

Screw Size : No.8. Length : 7/8". Head Style : Phillips Oval. Point Type : A/AB. Head Size : Std. Finish : Zinc

Screw Size : No.8. Length : 1". Head Style : Phillips pan. Point Type : A/AB. Finish : Black Oxide

Screw Size: No.8, Length: 3/4", Head Style: Hex Washer, Point Type: No.2 Drill, Hex Size: 1/4", Finish: Zinc

Screw Size : No.8. Length : 1". Head Style : Phillips Oval. Point Type : A/AB. Head Size : Std. Finish : Black Oxide

HONDA SPECIALTY SEMS SCREW M4.8-1.61 X 19MM. Screw Size : M4.8-1.6. Length : 19MM. Point Type : A/AB. Head Style : Phillips Truss, Sems. Washer Dia...

Screw Size : No.8. Length : 3/4". Head Style : Phillips Oval, SEMS. Point Type : A/AB. Head Size : No.6. Washer : Countersunk. Finish : Chrome

Screw Size : No.10. Length : 1". Head Style : Phillips Oval, SEMS. Point Type : A/AB. Head Size : No.8. Washer : Countersunk. Finish : Chrome

Screw Size : No.8. Length : 3/4". Head Style : Phillips Flat Top Washer. Point Type : A/AB. Finish : Black E-Coat

8 PC 18 X 1 1/4 PHIL OV 6 HD AB W/SEMS TS -BLK

No.10 X 3/4 HEX WASHER HEAD TEKS T.SZINC. Screw Size : No.10. Length : 3/4". Head Style : Hex Washer. Point Type : No.2 Drill. Hex Size : 5/16". Fi...

Screw Size : No.10. Length : 3/4". Head Style : Phillips pan. Point Type : A/AB. Finish : Zinc

Thread Diameter : M8-1.25. Length : 16MM. Head Style : Hex Socket Cap. Thread Pitch : Regular. DIN : 912. Class : 12.9. Finish : Plain. Tensile Str...

Screw Size : M4.2-1.41. Length : 20MM. Point Type : A/AB. Head Style : Phillips Pan, Sems. Washer Diameter : 16MM. Finish : Phosphate. OEM Number :...

Tapping Screw Generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grommets ...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Screw Size : No.8. Length : 1/2". Point Type : No.2 Drill. Head Style : Phillips Washer. Washer Head Diameter : 7/16". Finish : Black Phosphate. OE...

Screw Size : No.8-18. Length : 7/16". Point Type : A/AB. Head Style : Pozidriv Washer. Washer Head Diameter : 9/32". Finish : Zinc