Brake Hardware

8 inch length with invert flares. 5/16" O.D. silver zinc tubing. No.3006 (1/2". 20) tube nuts at both ends. Use with No.3007 unions (not included) ...

60 inch length with bubble flares. 3/16" O.D. polyvinyl fluoride (PVF) tubing. No.3410 (3/8". 24) tube nuts at both ends. Use with No.3047 unions (...

Save time, money and labor by replacing the failed wheel bearing dust cap—instead of the entire wheel hub. Save time, money and labor by replacing ...

3046 - Banjo/Flex Line Bolts & Gaskets, Copper. Outside Diameter 5/8" (0.625") 15.90 mm. Inside Diameter 15/32" (0.450") 11.50 mm. Thickness 1/...

Female 3/16"(3/8"-24) Invert Flare. Male 3/16"(11mm x 1.50) Bubble Flare.

20 inch length with invert flares. 3/16" O.D. polyvinyl fluoride (PVF) tubing. No.3043 (10mm x 1.0) tube nuts at both ends. Use with No.3059 unions...

51 inch length withbubble flares. 3/16" O.D. silver zinc tubing. No.3028 (10mm x 1.0) tube nuts at both ends. Use with No.3044 unions (not included...

Female 3/16"(3/8"-24) Invert Flare. Male 3/16"(9/16"-18) Invert Flare.

12 inch length with invert flares. 3/16" O.D. silver zinc tubing with spring armor cover. No.3000 (3/8". 24) tube nut on one end and No.3001 (3/8"....

51 inch length with invert flares. 3/16" O.D. silver zinc tubing. No.3000 (3/8". 24) tube nut on one end and No.3001 (3/8". 24 Long) tube nut on th...

20 inch length with invert flares. 3/16" O.D. silver zinc tubing. No.3000 (3/8". 24) tube nut on one end and No.3001 (3/8". 24 Long) tube nut on th...

8 inch length with invert flares. 3/16" O.D. polyvinyl fluoride (PVF) tubing. No.3000 (3/8". 24) tube nut on one end and No.3001 (3/8". 24 Long) tu...

Save time, money and labor by replacing the failed wheel bearing dust cap—instead of the entire wheel hub. Save time, money and labor by replacing ...

30inch length withinvert flares. 3/16" O.D. silver zinc tubing. No.3043 (10mm x 1.0) tube nuts at both ends. Use with No.3059 unions (not included)...

40 inch length with invert flares. 5/16" O.D. polyvinyl fluoride (PVF) tubing. No.3006 (1/2". 20) tube nuts at both ends. Use with No.3007 unions (...

30 inch length with invert flares. 5/16" O.D. polyvinyl fluoride (PVF) tubing. No.3006 (1/2". 20) tube nuts at both ends. Use with No.3007 unions (...

51 inch length with invert flares. 3/16" O.D. polyvinyl fluoride (PVF) tubing. No.3043 (10mm x 1.0) tube nuts at both ends. Use with No.3059 unions...

Available in a range of thread sizes and lengths our banjo bolts are made of high-quality materials for long-lasting durability. Available in a ran...

8 inch length with invert flares. 1/4" O.D. silver zinc tubing with spring armor cover. No.3003 (7/16". 24) tube nut on one end and No.3004 (7/16"....

20 inch length withbubble flares. 3/16" O.D. silver zinc tubing. No.3028 (10mm x 1.0) tube nuts at both ends. Use with No.3044 unions (not included...

For 1/4" tube. Invert Flare with12mm x 1.0 thread-13mm hex headNote: Tube nut design allows for use withbubble flares as well.

3055 - Banjo/Flex Line Bolts & Gaskets, Copper. Outside Diameter 5/8" (0.648") 16.40 mm. Inside Diameter 13/32" (0.42") 10.60 mm. Thickness 3/3...

30 inch length with invert flares. 3/8" O.D. silver zinc tubing with spring armor cover. No.3015 (5/8". 18) tube nuts at both ends. Use with No.301...

51 inch length with bubble flares. 3/16" O.D. polyvinyl fluoride (PVF) tubing. No.3028 (10mm x 1.0) tube nuts at both ends. Use with No.3044 unions...

51 inch length with invert flares. 3/16" O.D. silver zinc tubing with spring armor cover. No.3043 (10mm x 1.0) tube nuts at both ends. Use with No....

Multi Stage Block Off Cap

Female invert flare for 1/4" O.D. tube. Male 1/4 pipe thread.

STAINLESS STEEL TUBE NUT (BUBBLE FLARE). For 3/16" tube. Invert Flare with10mm x 1.0 thread-12mm hex head.

EZ Fit Push In Quick Connector (No Tools Required). 3/8" to 10mm nylon fuel line (2963-25). 2983 clamp included. Press fit by hand.

Achieve cost-saving efficiency with our Parking Brake Release Handle. Re-improved to address failure points in the original materials, it's made of...

For 21082. gasketsrequired partNo. 3048 (not included)For21082 boltwith two 3048 copper gaskets order partNo. 21082K.

For 3/16" tube. Invert Flare with11mm x 1.50 thread-12mm hex head.

51 inch length with bubble flares. 6mm O.D. polyvinyl fluoride (PVF) tubing. No.3421 (12mm x 1.0) tube nuts at both ends. Use with No.4238 unions (...

Available in a range of thread sizes and lengths our banjo bolts are made of high-quality materials for long-lasting durability. Available in a ran...

8 inch length withbubble flares. 3/16" O.D. silver zinc tubing with spring armor cover. No.3028 (10mm x 1.0) tube nuts at both ends. Use with No.30...

For 1/2" tube. Invert flare with 3/4" -18 thread. 3/4" hex head.

Save time, money and labor by replacing the failed wheel bearing dust cap—instead of the entire wheel hub. Save time, money and labor by replacing ...

3/8 Tube(5/8 Thread) X 16Mmx1.

20inch length withinvert flares. 3/16" O.D. silver zinc tubing. No.3417 (10mm x 1.0) tube nuts at both ends. Use with No.3059 unions (not included)...

For 1/4" tube. Bubble flare with13mm x 1.50thread-14mm hex head.

40 inch length with invert flares. 3/16" O.D. silver zinc tubing. No.3000 (3/8". 24) tube nut on one end and No.3001 (3/8". 24 Long) tube nut on th...

For 3/16" tube. Invert Flare with9/16" -18 thread-5/8" hex head.

72 inch length with invert flares. 5/16" O.D. polyvinyl fluoride (PVF) tubing. No.3006 (1/2". 20) tube nuts at both ends. Use with No.3007 unions (...

20inch length withinvert flares. 3/16" O.D. silver zinc tubing. No.3043 (10mm x 1.0) tube nuts at both ends. Use with No.3059 unions (not included)...

12inch length withinvert flares. 3/16" O.D. silver zinc tubing. No.3417 (10mm x 1.0) tube nuts at both ends. Use with No.3059 unions (not included)...

9404 - Brake System Hardware Bleeder Screws & Rubber Caps. 1/4" - 28 Bleeder Screw x 0.925". Thread 1/4" - 28. Length 0.925 in.

20 inch length with invert flares. 5/16" O.D. silver zinc tubing. No.3006 (1/2". 20) tube nuts at both ends. Use with No.3007 unions (not included)...

5/16" Steel Retainer Clip