Lubrication Equipment

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2105, Type: 90°, Thread: M8 x 1, Overall Length (mm): 19, Quantity per ...

Continuous flow pneumatic grease gun eliminates the need of pumping a standard greaser gun, making your task a whole lot easier. Pneumatic grease g...

24 assorted grease fittings in six popular sizes blister-packed on one card. The ball check in the head of the fitting prevents dirt and grit from ...

Buyers Products Taper Thread Grease Fittings feature a 1/4 in.-28 tapered thread to seal in the grease. They install into a standard 1/4 in.-28 str...

For tap repair of 1/4 In.-28 damaged threads. For removal of 3/8 In. and 5/16 In. Hex, straight or angle fittings. For retapping holes for new fitt...

Thread Size: 1/8 in. NPT. Minimum Pressure (psi): 15 psi. Pressure Safety Switch Style: Normally closed.Stewart Warner 5000 Series Pressure Switche...

Regulator Kit for 11802 Used Fluid DrainerRegulator Kit

With ball check and hex nut on body end. Fits over grease fittings. 10,000 psi. 1/8” NPT Coupler. For heavy duty applications. 5 per package.Heavy ...

Notes: Dual circuit switch activates at 100 psi. Thread Size: 1/8 in. NPT. Minimum Pressure (psi): 100 psi. Stewart Warner 5000 Series pressure swi...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1688, Thread: 1/8" National Pipe Thread, Overall Length: 7/8" (22.6mm),...

Features electro-static, corrosion-resistant finish and non-slip knurling for better grip. Steel block head offers protection for hardened steel pl...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1652, Thread: 1/4" - 28 Long, Overall Length: 11/16" (17.5mm), Shank Le...

Swivels in full 360° circle & locks at any 45° position. Specifically designed for vehicles & equipment with hard-to-reach fittings. 1/8” N...

Type: Grease Fittings. Detail Type: S.A.E. Number of Pieces: 10. Number of Sizes: 5.SAE Grease Fitting Assortment

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1613, Thread: 1/8" National Pipe Thread, Overall Length: 27/32" (21.4mm...

Designed for the direct transfer of gasoline, oil and other noncorrosive fluids from one container to another. Capacity: 17 oz. (500 cc). Rugged co...

Wide Heavy-Duty Oil Filter Wrench 4-1/8" to 4-1/2". Extra Wide 3€ Band for Better Grip and Reduced Canister Damage. Not for Use With Impact Guns. .

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2108, Type: 90°, Thread: M6 x 1, Overall Length (mm): 19, Quantity per ...

Buyers Products NPT Grease Fittings are available in various configurations to fit your application's requirements. They are sold in multiples of 1...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2110, Type: 45°, Thread: M10 x 1, Overall Length (mm): 22.6, Quantity p...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1911, Thread: 1/4" - 28, Overall Length: 25/32" (19.05mm), Shank Length...

Pack of five 65 degree grease fittings have 1/8" - 27 PTF. 65 degree angle grease fitting 1/8" pipe thread fittings Grease gun accessory For best r...

PRESSURE SWITCH

110531-01 is a switch kit for M-120, M-150, M-1100, M-150S, M-180S, and M-240S pump models.

5010 Thread-Forming Grease Fitting. Head Angle: Straight, Fitting Thread Size: 1/4-28", Hex Size: 5/16".

GPI 118504-1 Overhaul Kit for P-200H 12V Plastic Utility Pump. Includes Coverplate O-Ring No.16, Motor Shaft Seal No.6C, Motor Adapter Seal No.6A, ...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1637, Thread: 1/4" - 28, Overall Length: 7/8" (20.57mm), Shank Length: ...

Lincoln Universal Bearing Packer will pack bearings up to 4-1/2" ID while forcing out old Grease. Can be used with any Guardian Grease Gun.

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2104, Type: 45°, Thread: M8 x 1, Overall Length (mm): 20.5, Quantity pe...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1637, Thread: 1/4" - 28, Overall Length: 7/8" (20.57mm), Shank Length: ...

For manual grease guns only. Length: 5-1/2", Ends: 1/8" NPT, Safe Working Pressure: 6,000 PSI, Package Type: Polybag.Replacement Grease Gun Pipe 5-1/2

GPI 906004-88, filter adapter for use with 18 GPM (68 L/min) fuel transfer pumps has 1 in. NPT connection.The GPI Cast Iron Adapter (906004-88) fea...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2103, Type: Straight, Thread: M8 x 1, Overall Length (mm): 15.7, Quanti...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1911, Thread: 1/4" - 28, Overall Length: 25/32" (19.05mm), Shank Length...

MEASURER

Lincoln 1888 PowerLuber 20-Volt Lithium-Ion High Pressure 2 Speed Cordless Grease Gun. 2 Battery Kit. Lincoln has introduced its PowerLuber series ...

4,500 PSI Maximum Operating Pressure. Thread size - 1/8 In. NPT (m). Strategically placed coil spring provides nonslip, push-pull grip and prevents...

Lightweight, corrosion resistant zinc head casting design incorporates uniform wall thickness and an integral patented muffler keeps noise level be...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1652, Thread: 1/4" - 28 Long, Overall Length: 11/16" (17.5mm), Shank Le...

Pressure Safety Switch Style: Normally closed. Minimum Pressure (psi): 35 psi. Adjustable: No. Thread Size: 1/8 in. NPT

HEAVY DUTY GREASE GUN HOLDER - If it moves, grease it! - From ball joints to control arms and tie rods, the grease fitting has made a comeback, mea...

Minimum Pressure (psi): 60 psi. Pressure Safety Switch Style: Normally closed.Stewart Warner 5000 Series pressure switches offer excellent accuracy...

Pressure Safety Switch Style: Normally open. Minimum Pressure (psi): 35 psi. Adjustable: No. Thread Size: 1/8 in. NPT

5182 Taper Thread Grease Fitting - 45 ° Angle, M10 Thread Size, Metric Thread Type. Fitting Thread Size M10. Fitting Thread Type Metric. Ball Check...

LINCOLN INDUSTRIAL 83938. STRAIGHT HIGH-PRESSURE GREASE SWIVEL FOR CONTROL VALVES & METERS. Configuration - Straight. Thread Size - 1/4" NPT(m)...

21 V max output/ 18 V nominal output. Capacity 3000mAh. Constant output for fade free power. Three times as many recharges vs. Ni-Cad battery. Char...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2111, Type: 90°, Thread: M10 x 1, Overall Length (mm): 21.4, Quantity p...

Lincoln Model No. 5400 Bulk Fittings: 1/8" Thread - 90° angle.