Lubrication Equipment

GPI 110504-1, conversion and overhaul kit for use with electric fuel pumps. Includes (2) Gears, Drive Key and Replacement Seals, Motor Shaft, Poppe...

110032-501. Union Ring Gasket for M-150S, M-180S & M-240S 12V & 24V Electric Gear Pump.

GPI 902006-555 is a Circuit Breaker Switch for 12 VDC fuel transfer pump.

GPI Power Cord Assembly with Strain Relief Connector Easy to install dome nut strain relief connector with NPT threads. Prevents kinking, twisting ...

The GPI Electric Fuel Pump Bung Adapter Kit (No.110909) includes a tank bung adapter bushing and an NBR rubber union ring gasket. GPI 110909-1, bun...

GPI 110277-505, M-150S Switch Assembly (Switch, Breaker, Bracket).The GPI M-150S Switch Assembly (110277-505) is easy to install as a replacement s...

GPI 110049-07, 3/4 in. x 20 ft. (6.1 m) replacement hose assembly for use with fuel transfer pumps with spring support.The UL Listed Hose Assembly ...

110531-01 is a switch kit for M-120, M-150, M-1100, M-150S, M-180S, and M-240S pump models.

GPI 118504-1 Overhaul Kit for P-200H 12V Plastic Utility Pump. Includes Coverplate O-Ring No.16, Motor Shaft Seal No.6C, Motor Adapter Seal No.6A, ...

GPI 906004-88, filter adapter for use with 18 GPM (68 L/min) fuel transfer pumps has 1 in. NPT connection.The GPI Cast Iron Adapter (906004-88) fea...

GPI 129300-01, 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.The GPI Particulat...

GPI 110540-03 Diesel Nozzle Hook Kit is used for M-3020 Fuel Transfer Pumps.

Automatic Nozzle Hook is used for M-150S, M-180S & M-240S Fuel Transfer Pumps.

110927-05 Gear Coverplate Kit is used for M-180S Fuel Transfer Pumps.

133078-1 Switch Mounting Bracket is used for fuel transfer pump.

Wet Seal Kit, Includes Motor Shaft Seal and O-Rings for Strainer Coverplate, Gear Coverplate and Bypass Poppet.

129340-06. 30 Micron Particulate Filter (40 GPM). It delivers up to 40 GPM (151 LPM). 1 1/2 - 16 UNF mounting thread.

110907-1 is a Gear Kit used for M-150S-EM, M-150S, M-180S & M-240S Pumps. The kit includes two gears & drive key.

GPI 129340-05 is a 2 micron Bio-Tek® water & particulate filter. It delivers up to 40 GPM (151 L/min), with 1 1/2 - 16 UNF mounting thread.The ...

GPI 906005-67, filter adapter for use with 30 GPM, 40 GPM fuel transfer pumps has 1 in. NPT connection.Use the GPI Aluminum Adapter (906005-67) wit...

GPI 110529-02, 3/4 in. x 12 ft. (3.66 m) hose kit for use with fuel transfer pumps.The GPI Hose Kit (110529-02) is a 1 in. x 12 ft. (3.7 m) hose. T...

GPI 129300-02, 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.The GPI Water and ...

GPI 119200-551 12-Volt Motor is used for M-150S-EM, M-150S Fuel Transfer Pumps.

GPI 129340-02, 10 micron 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread includes draincock....

This GPI Overhaul Kit is designed to keep the GPI HP-90 Lever-Action Piston Hand Pump working as long as possible. It includes flapper valves, O-Ri...

110276-501 Switch Coverplate Assembly is used for M-150S-EM, M-1115S Fuel Transfer Pumps.

Clean fuel is essential to the health and performance of your equipment. 10 micron nominal filtration removes rust, dirt and dust that can damage y...