Lubrication Equipment

GPI 110504-1, conversion and overhaul kit for use with electric fuel pumps. Includes (2) Gears, Drive Key and Replacement Seals, Motor Shaft, Poppe...

The LNL252 delivers up to 8,000 PSI. A cast aluminum head combines extreme durability and light weight construction. A large ergonomic handle means...

The LockNLube Pressure Return Valve allows grease to flow from the hose back to the barrel with just the twist of a knob. No more pressure locks an...

Single-shot and continuous delivery modes in one grease gun! Easily switch delivery mode with sliding selection lever.Single-shot and continuous de...

Quick Connect Greasing Accessory Kit. Reach any grease fitting on any machine! Eight quick-connect adapters allow access to hard-to-reach grease fi...

Made of rugged high-density polyethylene. Capacity: 24 L, Length: 32", Depth: 7-1/2", Width: 21-1/2" Material: Polyethylene. Usable Length: 32". Ca...

3/8" & 1/2" Drive Heavy-Duty Oil Filter Strap Wrench. Strap is Made of High Strength Oil Resistant Nylon and Handle is Made of Forged Steel. Ch...

110032-501. Union Ring Gasket for M-150S, M-180S & M-240S 12V & 24V Electric Gear Pump.

GPI 902006-555 is a Circuit Breaker Switch for 12 VDC fuel transfer pump.

Professional series fluid pump for 16 to 55 gallon drums. Front position handle design simplifies pump use. Brass piston ring design resists wear. ...

GPI 110504-1, conversion and overhaul kit for use with electric fuel pumps. Includes (2) Gears, Drive Key and Replacement Seals, Motor Shaft, Poppe...

The LockNLube Pressure Return Valve allows grease to flow from the hose back to the barrel with just the twist of a knob. No more pressure locks an...

LEVER ACTION BUCKET PUMP. If it moves, grease it! From ball joints to control arms and tie rods, the grease fitting has made a comeback, meaning mo...

Seals to keep fluids in during transportation. Handles on end for easy transportation. 44 L Capacity. Capacity: 44 L.44L Low Profile Sealable Oil D...

Wide Heavy-Duty Oil Filter Wrench 4-3/8" to 5-1/4". Extra Wide 3€ Band for Better Grip and Reduced Canister Damage. Not for Use With Impact Guns. .

Seals to keep fluids in during transportation. Handles on end for easy transportation. 44 L Capacity. Capacity: 44 L.44L Low Profile Sealable Oil D...

GPI Power Cord Assembly with Strain Relief Connector Easy to install dome nut strain relief connector with NPT threads. Prevents kinking, twisting ...

Die-cast head with 4" rigid pipe extension and coupler (G113 equipped with 18" flex hose extension and coupler). One-hand operation. Uses standard ...

The GPI Electric Fuel Pump Bung Adapter Kit (No.110909) includes a tank bung adapter bushing and an NBR rubber union ring gasket. GPI 110909-1, bun...

GPI 133537-01, particulate filter kit for use with fuel transfer pumps. Includes 1 in. NPT Cast Aluminum Filter Adapter, 1 in. NPT x 7 in. Galvaniz...

Ideal for oils, acids, adhesives, etc. Will not rust, leak or dent. Made of flexible, durable polyethylene. Removeable base for easy cleaning. 3” N...

Ideal for oils, acids, adhesives, etc. Will not rust, leak or dent. Made of flexible, durable polyethylene. Removeable base for easy cleaning. 3” N...

GPI 129340-02, 10 micron 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread includes draincock....

GPI 129300-01, 10 micron, 18 GPM (68 L/min) particulate filter for use with fuel transfer pumps with No 1-12 UNF mounting thread.The GPI Particulat...

PRESSURE SWITCH

Pack of five 65 degree grease fittings have 1/8" - 27 PTF. 65 degree angle grease fitting 1/8" pipe thread fittings Grease gun accessory For best r...

1/8" - 27 female pipe thread on a 45 degree grease fitting. Longer 45 degree grease gun fittings. 1/8" - 27 pipe thread female Grease gun accessory...

360 degree swivel grease gun coupler with 3 jaw 1/8" FNPT. Maximum working pressure 7,000 PSI. Made for hand operated grease guns only. 1/8" Female...

PRESSURE SWITCH

Suitable for high-pressure applications such as track adjusters, clogged fittings and high-tolerance locations (10,000 psi).The grease gun has a th...

Jam-proof toggle mechanism prevents binding or accidental bending of plunger. Precision fit and hardened plunger prevents lubricant bypass and resi...

Use a drive-in grease fitting tool to tap into desired area. Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1743-B, Dr...

Use a drive-in grease fitting tool to tap into desired area. Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1608-B, Dr...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1627, Thread: 1/4" National Pipe Thread, Overall Length: 15/16" (22.35m...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1911, Thread: 1/4" - 28, Overall Length: 25/32" (19.05mm), Shank Length...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1641, Thread: 1/4" - 28, Overall Length: 1/2" (13.97mm), Shank Length: ...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1688, Thread: 1/8" National Pipe Thread, Overall Length: 7/8" (22.6mm),...

Heavy-Duty Pistol Grip Type Grease Gun - 16 oz. Bulk / 14.5 oz. Cartridge - 18" Flex Hose, 6" Straight Pipe & Coupler - Extra-heavy-duty pistol...

Reinforced rubber cover with steel wire braid. Working temperature: -40° to 95°C. Each grease hose is individually UPC barcode labeled inside a ful...

Reinforced thermoplastic cover with steel wire braid. Retail Packaged. Length: 12", Ends: 1/8" NPT, Safe Working Pressure: 3, 600 PSI, Working Temp...

Reinforced thermoplastic cover with nylon braid. Comes in Retail Package. Length: 18", Ends: 1/8" NPT, Safe Working Pressure: 4, 500 PSI, Working T...

Use a drive-in grease fitting tool to tap into desired area. Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1666, Dril...