Specialty Tools

A Set of the Most Popular Disconnect Tools in One Handy Molded Case. Includes fuel line quick connect and spring lock couplings, air conditioning l...

2 Pc. Fan Clutch Pulley Holder Set for 6.0 Liter Ford Powerstroke. Designed for Fan Clutch Removal on 2003 and Newer Ford 6.0-L & 6.4-L Powerst...

39410. Fuel Line Disconnect Tool, 5/16". Easily disconnects air conditioning lines and Quick Connect fuel lines. Tools that disconnects the spring ...

Short 3/8-16 Installer AdapterShort 3/8-16 Installer Adapter

Straight Tip Set for 38700Straight Tip Set for 38700

Quickly and Easily Release STC Fittings. The angled head provides extra clearance in tight spaces. Works on GM step vans with Allison transmission ...

Accurately Lines Up and Holds Cams for Proper Timing Chain Alignment on Honda® K-Series Engines. Insert the pins into the camshaft pulse plates to ...

Unique Design Provides Extra Leverage When Disconnecting Quick Connect Coupling Air Conditioning and Fuel Lines. Use with 5/16", 3/8" or 1/2" adapt...

Big Range Scraper Action. Rollers assure easy turning in cylinder. Exclusive stabilizer spring allows operator to take selective cut to minimize ch...

2" x 3-1/2" Mirror Swivels to Any Position. Telescopes from 6-3/4" to 40-1/2".

Quickly Removes and Installs "O" Rings and Seals. Tips are angled for hard-to-reach areas typically found around brakes, air conditioning and trans...

Axel Nut Socket May work on other vehicles with 3.125" O.D. Axle nut. The circular nut is engaged by the 12 pin socket for removal and installation...

Axel Nut Socket may work on other vehicles with 2.97" O.D. Axle nut. Full floating hubs are held on with a circular nut that is engaged by the 9 pi...

2 or 4 Jaw Reversible & Adjustable 5 Ton Puller or 3 Jaw Reversible & Adjustable 5 Ton Puller. 5-1/2" Reach and 7" Spread.

Checks Both Low Voltage and Spark Plug Wires. The low-side checks AC and DC current up to 28 volts with power on. The high-side checks spark plug w...

Installs Most Truck Wheel Studs in Seconds. Use with an impact wrench or ratchet. The tool body is equipped with a thrust bearing to easily pull th...

Operating range of 3-49 volts DC to work on most vehicle electrical systems. 360° visibility of polarity. The red light indicates positive polarity...

30170. 3/8 to 5/16 Hex screwdriver. 3/8" flat tip screwdriver. 5/16" Hex Impact for Sockets and Conductors. 3/8" Straight Slot Screwdriver Bit.

Our M18 FUEL™ 16 Gauge Angled Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle...

Adjustable Probes fit all Electronic Fuel Injection Systems. Versatile tool tests throttle body injectors, ported fuel injectors and sequential cen...

1/2" Drive T-60 Torx Bit. Heat-treated alloy steel.

Heavy Duty Tester Signals With A Light And Buzzer. The tester kit tests low voltage up to 28 volts. Also finds electrical shorts, checks polarity, ...

Hooded Probe Protects Your Fingers and Automatically Centers the Wire. Small size allows easy use even in the tightest places. Quickly test low vol...

This heavier plastic construction cutter is available in three colour options and arrives in easy to setup counter top display box. The customizati...

Fixed Tip External Lock Ring Pliers. Remove and Install Snap Rings Without Holes Used on Brakes, Transmissions, Pedal and Clutch Shafts. Scored Jaw...

REGULATOR KIT

LINCOLN INDUSTRIAL 274107 KIT SEAL.

Low Profile Design Quickly and Easily Disengages the Line from Jiffy-tite Quick-Connect Fittings without Removal of the Clip. The teeth of the tool...

Powerful magnet holds even heavy hand tools. Ideal for both home and shop. Mounting screws included. *24" long *16" between tabs *1" thick.

Powerful magnet holds even heavy hand tools. Ideal for both home and shop. Mounting screws included. *13" long *10" between tabs *1" thick.

For Springs 3/4" to 1 1/16". Heavy-duty frame and screw for rigidity. Two jaw sizes. For Briggs and Stratton, Clinton, Harley-Davidson, etc. 23360-...

Three-Way Battery Tool. Sharp Steel Blades on This Tool Remove Corrosion and Put a Correct Angle on Terminal Clamps and Posts. Use the 6-Blade, Tap...

4 Ways Better! 1. LOW FRICTION! Wrinkle Band cuts friction in half. Rings slide in easily. 2. WRINKLE BAND! Can't slip down into cylinder. 3. CAM O...

Removes and Installs Door Handle and Window Crank Clips. Works on GM, Ford and others using the common "C" type clip. Really fast and easy. Helps p...

OTC 1947A 41mm Budd Wheel Socket. 41 millimeter hex socket with 21 millimeter square. Works on import truck Budd wheels. Extra deep design lets you...

Designed to transfer liquids into a 55 gallon drum. The funnel drain sits on the top cover of 55 gallon drums. The funnel snout fits into the top b...

Made from corrosion resistant aluminum, protects documents from the elements. 1-1/2" inside diameter and 9" long.Aluminum Tube Style Document Holder

30 quart, heavy-duty, all-purpose plastic drain tub. For draining radiators, crankcases, transmissions, differentials, etc. on cars and trucks. Des...

16560. VALVE SPRING COMPRESSOR FOR GM LS. Works on Most GM LS-Type Engines. Allows removal of the valve spring without removing the rocker stand or...

16460. Designed for use with 2.35 in. to 2.75 in. cylinder hones only. Lisle cylinder hone replacement components allow you to extend your range of...

16430. STONE SET. 180 Grit. For the 16000 Small Cylinder Hone.

17060 5" ADAPTER FOR PIPE STRETCHER. Collet expand pipes up to 5" including stainless steel. The tool must be used with the 17350 Tail pipe stretch...

16450. Designed for use with 2.05 in. to 2.50 in. cylinder hones only. Lisle cylinder hone replacement components allow you to extend your range of...

15500. STONE & WIPER SETS. 80 Grit. For 15000 Engine Cylinder Hone.

Low Profile Oil and Fuel Filter Canister Socket. Very low profile, 6 point socket for use on oil and fuel filter canisterswhen replacing the lement...

13290 28MM LOW PROFILE FUEL FILTER SOCKET. Application: 2010-2018, 6.7L Dodge Cummins fuel filter cannister.

Quickly Disconnects Electrical Connectors Without Damage. Engage the tool tip behind the connector clip. Push or pull to disconnect. The tool is do...