Specialty Tools
Filters
- Apex Tool (222)
- Apex Tool (442) (194)
- Continental (500) (1)
- Dynaline (60)
- Dynaline (378) (54)
- H. Paulin (1)
- H. Paulin (680) (1)
- Lincoln (11)
- Lincoln (502) (21)
- Lisle (377)
- Lisle (371) (408)
- Milwaukee (1)
- Milwaukee (366) (2)
- OTC/Bosch (66)
- OTC/Bosch (142) (90)
- Permatex (1)
- Permatex (610) (1)
- Robinair (1)
- Scepter (936) (1)
- SureWerx (94)
- SureWerx (545) (92)
- Trux Accessories (1)
- Trux Accessories (737) (1)
- Robinair (142) (0)
Lisle (371) 46950 Pliers for Removing Electrical Relays on MostDomestic and Import Vehicles. Offse
Lisle (371)MPN: 46950
SKU: 46950-S03B-371
Pliers for Removing Electrical Relays on MostDomestic and Import Vehicles. Offset handle and thin tips allow access to relays in confined areas.Spe...
View full detailsOTC/Bosch (142) 4591 BRAKE SPRING COMPRESSOR TOOL
OTC/Bosch (142)MPN: 4591
SKU: 4591-S03B-142
Provides leverage to remove and install stubborn hold-down springs of drum brakes on cars and light trucks. Special beveled cup end and notched des...
View full detailsLisle (371) 44880 44880 LIFT SUPPORT CLAMP WITH MAGNET
Lisle (371)MPN: 44880
SKU: 44880-S03B-371
Holds Gas Charged Lift Supports Up to 9/16", Found On Hoods, Tailgates, Hatchbacks and Trunks. Neodymium Magnet Holds the Tool in Place While Secur...
View full detailsLisle (371) 44150 Bends 3/16” Brake Lines Without Kinking or Flattening, Especially in Tight Spots
Lisle (371)MPN: 44150
SKU: 44150-S03B-371
Bends 3/16” Brake Lines Without Kinking or Flattening, Especially in Tight Spots. Bend all types of 3/16"OD tubing.Unique head design bends tubing ...
View full detailsLisle (371) 44070 1/4" TUBING BENDER P
Lisle (371)MPN: 44070
SKU: 44070-S03B-371
Bends 1/4Brake Lines Without Kinking or Flattening, Especially in Tight Spots. Bends all types of 1/4OD tubing. Unique head design bends tubing wit...
View full detailsLisle (371) 44000 Bends 4 Sizes. Easy to use with one end connected - or can be mounted in a vise.
Lisle (371)MPN: 44000
SKU: 44000-S03B-371
Bends 4 Sizes. Easy to use with one end connected - or can be mounted in a vise. Exclusive nylon form prevents kinking or flattening. For 3/16", 1/...
View full detailsLisle (371) 43580 SHORT GM DODGE FAN WRENCH
Lisle (371)MPN: 43580
SKU: 43580-S03B-371
43580. GM/DODGE HOLDING WRENCH. Lisle fan clutch holding tools make it a breeze to remove and install fan clutches. Operating together, the univers...
View full detailsLisle (371) 43300 Quickly Removes & Installs Fan Clutch When Repairing The Water Pump Or Fan Clutc
Lisle (371)MPN: 43300
SKU: 43300-S03B-371
Quickly Removes & Installs Fan Clutch When Repairing The Water Pump Or Fan Clutch. Does the job much faster and easier than conventional fan cl...
View full detailsLisle (371) 42650 Comes in Handy Storage Case. Allows for longer reach for deep socket Allen-type
Lisle (371)MPN: 42650
SKU: 42650-S03B-371
Comes in Handy Storage Case. Allows for longer reach for deep socket Allen-type screws. Also increases torque. Set includes 9 metric hex keys 1.5mm...
View full detailsLisle (371) 42300 Comes in Handy Storage Case. 42300 Metric Set includes 9 heat-treated alloy hex
Lisle (371)MPN: 42300
SKU: 42300-S03B-371
Comes in Handy Storage Case. 42300 Metric Set includes 9 heat-treated alloy hex keys: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. Also availa...
View full detailsLisle (371) 42070 PUSH PIN PLIERS, 80 DEGREE
Lisle (371)MPN: 42070
SKU: 42070-S03B-371
42070. PUSH PIN PLIERS, 80 DEGREE. For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins. Angled Pliers Tips will Not Damage t...
View full detailsLisle (371) 42050 PUSH PIN PLIERS
Lisle (371)MPN: 42050
SKU: 42050-S03B-371
42050 PUSH PIN PLIERS. For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins. Spring Action Makes Tool Easier to Use. For use ...
View full detailsApex Tool (442) 41880D Specialty Tools NEW COMB DOUBLE/BUBBLE
Apex Tool (442)MPN: 41880D
SKU: 41880D-S03B-442
Combined Double/Bubble Flaring Tool Kit. Complete Double and Bubble Flaring Tool Assortment. Slots on Yoke Firmly Engage with Bar Assembly. Include...
View full detailsApex Tool (442) 41690 Specialty Tools FRONT END SERVICE SET
Apex Tool (442)MPN: 41690
SKU: 41690-S03B-442
Front End Service Set. Allows for Easy Removal of the Most Popular Types of Pitman Arms, Tie Rods, and Ball Joints. .
Lisle (371) 41500 For Separating Ball Joints, Tie Rods, Pitman Arms and Other Uses. Six tools in o
Lisle (371)MPN: 41500
SKU: 41500-S03B-371
For Separating Ball Joints, Tie Rods, Pitman Arms and Other Uses. Six tools in one for exceptional versatility and value. Kit consists of three for...
View full detailsLisle (371) 40460 PLIER RACK
Lisle (371)MPN: 40460
SKU: 40460-S03B-371
Organize your tool box drawer. Pliers / Wrench Rack is constructed out of plastic and will hold up to 13 tools. There are two different size of slo...
View full detailsLisle (371) 39660 FORD TRAN DISCONNECT
Lisle (371)MPN: 39660
SKU: 39660-S03B-371
Stepped Design with Two Sizes to Work on Ford and Cadillac Vehicles. Similar in function to our 39960 plastic model but made from metal and in a sc...
View full detailsApex Tool (442) 3955 Specialty Tools CV BOOT CLAMP (LISLE)
Apex Tool (442)MPN: 3955
SKU: 3955-S03B-442
CV Boot Clamp Tool. Allows for Proper Installation of C Boot. Crimps Joints While With Center Pushing Feature. Works With Hand, 1/2" Drive Ratchets...
View full detailsLisle (371) 38750 15” Diameter Pad Protects Floors & Work Area from Messy Oil Splatter.
Lisle (371)MPN: 38750
SKU: 38750-S03B-371
15” Diameter Pad Protects Floors & Work Area from Messy Oil Splatter. Insert 15" diameter pad in funnel or oil pan before oil change in transmi...
View full detailsLisle (371) 38410 38410
Lisle (371)MPN: 38410
SKU: 38410-S03B-371
DEF & Fuel Line Disconnect Set Low Profile Compact Design Allows Easy Access to Hard-To-Reach DEF, Breather Line, Coolant Line, and Fuel Line C...
View full detailsLisle (371) 37230 TIMING TOOL FOR FORD 3.5L
Lisle (371)MPN: 37230
SKU: 37230-S03B-371
TIMING TOOL FOR FORD 3.5L TURBO
Lisle (371) 37200 TIMING TOOL FOR FORD WITH TENSIONER.
Lisle (371)MPN: 37200
SKU: 37200-S03B-371
37200. TIMING TOOL FOR FORD WITH TENSIONER VIDEO.
Lisle (371) 37140 LISLE 37140 DISCONNECT PLIERS, 45 DEGREE
Lisle (371)MPN: 37140
SKU: 37140-S03B-371
The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas. Disconnects fuel line, EVAP...
View full detailsLisle (371) 35460 Double-Ended Clip Lifter
Lisle (371)MPN: 35460
SKU: 35460-S03B-371
Thin Tips on this Double-Ended Tool Provide Easy Access When Removing Plastic Clips. Smaller opening works for lifting the center pin and the wider...
View full detailsLisle (371) 35200 For removing most windshield molding clips and door handle clips. Releases clips
Lisle (371)MPN: 35200
SKU: 35200-S03B-371
For removing most windshield molding clips and door handle clips. Releases clips to remove chrome molding on most windshields and rear glass. Offse...
View full detailsLisle (371) 35100 35100
Lisle (371)MPN: 35100
SKU: 35100-S03B-371
1/4" Pry Bar with Strike CapPocket Sized Pry Bar with Many Vehicle Applications and Features a Strike Cap. For use when removing seals, electrical ...
View full detailsLisle (371) 34400 Stretches All Pipe Including Stainless Steel. Use with an impact wrench to quick
Lisle (371)MPN: 34400
SKU: 34400-S03B-371
Stretches All Pipe Including Stainless Steel. Use with an impact wrench to quickly stretch pipes. Two collet sets fit pipes from 1 5/8" to 2 7/16"....
View full detailsApex Tool (442) 3390 Specialty Tools MINI SCRPR 30PK MERCH
Apex Tool (442)MPN: 3390
SKU: 3390-S03B-442
Mini Scraper. Use for Light Scraping on Wood, Metal and Glass. Small Size Allows for Scraping in Confined Areas. Scraper Includes Plastic Sleeve Ha...
View full detailsApex Tool (442) 3358 Specialty Tools WGT TL WHL
Apex Tool (442)MPN: 3358
SKU: 3358-S03B-442
Wheel Weight Tool. Tool Installs, Removes, Trims and Tightens All Types of Clip-On Wheel Weights. It Features a Special Plastic-Type Material on th...
View full detailsApex Tool (442) 3321 Specialty Tools DISCNNCT TL FUEL LINE QCK
Apex Tool (442)MPN: 3321
SKU: 3321-S03B-442
Fuel Line Quick Disconnect Tool. Tool Releases the Fuel Line Locking Mechanism on 1989 and Newer GM, 1990 and Newer Ford and Some 1990 and Newer Ma...
View full detailsLisle (371) 32900 Remove Threaded Stem Shocks in a Fraction of Flat-Rate Time. Breaks the stem bel
Lisle (371)MPN: 32900
SKU: 32900-S03B-371
A 2-in-1 Tester that Tests Circuits up to 12 Volts and Works as a Jumper Wire for Power or Ground. Heavy-duty circuit tester for checking low volta...
View full detailsApex Tool (442) 3245 Specialty Tools PULL SEAL
Apex Tool (442)MPN: 3245
SKU: 3245-S03B-442
Oil and Grease Seal Puller. Use Tool to Remove Oil and Grease Seals on Automobiles and Light Trucks. Puller Has 2 Tip Sizes for Most Applications. ...
View full detailsLisle (371) 32150 Provides a Convenient Electrical Ground and Power Source from the Vehicle. Plug
Lisle (371)MPN: 32150
SKU: 32150-S03B-371
Provides a Convenient Electrical Ground and Power Source from the Vehicle. Plug the tool into the cigarette lighter or power accessory receptacle. ...
View full detailsLisle (371) 32050 Enables You To See Around Corners. 2 1/4" diameter mirror swivels to any positio
Lisle (371)MPN: 32050
SKU: 32050-S03B-371
Enables You To See Around Corners. 2 1/4" diameter mirror swivels to any position. Length extends from 10" to 14". Has an insulated vinyl grip.
Lisle (371) 31830 Lisle 31830 Curved Mini Hook
Lisle (371)MPN: 31830
SKU: 31830-S03B-371
Lisle 31830 Curved Mini Hook Lisle 31830 Curved Mini Hook Lisle 31830 Curved Mini Hook
Lisle (371) 31800 Ideal for Marking Most Metal and Softer Material Surfaces. Comes with straight a
Lisle (371)MPN: 31800
SKU: 31800-S03B-371
Ideal for Marking Most Metal and Softer Material Surfaces. Comes with straight and 90° points to mark in even the tightest places. Heat-treated car...
View full detailsApex Tool (442) 3152D Specialty Tools PLR SNP RNG XL CONV
Apex Tool (442)MPN: 3152D
SKU: 3152D-S03B-442
Extra Large Universal Convertible Retaining Ring Pliers. For Use on Internal Rings 1-13/16" to 4" and External Rings 1-1/2" to 4". Easily Convert F...
View full detailsApex Tool (442) 3151 Specialty Tools LGE CONVERTBLE INT + EXT
Apex Tool (442)MPN: 3151
SKU: 3151-S03B-442
Large Universal Convertible Retaining Ring Pliers. For Up to 2.0" Diameter Rings. Easily Convert From Internal to External Rings By Moving Levers N...
View full detailsMilwaukee (366) 3150-20 M12™ Auto Technician Borescope
Milwaukee (366)MPN: 3150-20
SKU: 3150-20-S03B-366
Optimized for the automotive technician, the M12™ Auto Technician Borescope delivers 5mm access and clear diagnosis, meeting inspection demands in ...
View full detailsLisle (371) 31310 Makes Both Single and Double SAE Flares. Double Flaring Tool Set Makes Both Sing
Lisle (371)MPN: 31310
SKU: 31310-S03B-371
Makes Both Single and Double SAE Flares. Double Flaring Tool Set Makes Both Single and Double SAE Flares. This tool set includes everything to flar...
View full detailsLisle (371) 30950 For All Band-It® and Band-It Jr.® Style Clamps. Works on all CV joints using the
Lisle (371)MPN: 30950
SKU: 30950-S03B-371
For All Band-It® and Band-It Jr.® Style Clamps. Works on all CV joints using the Band-It or Band-It Jr. type boot bands. Use 5/8" socket or wrench ...
View full detailsLisle (371) 30190 NO 4 PHILLIPS BIT
Lisle (371)MPN: 30190
SKU: 30190-S03B-371
30190. No.4 PHILLIPS BIT
Lisle (371) 30150 1/2IN BIT HOLDER
Lisle (371)MPN: 30150
SKU: 30150-S03B-371
1/2IN BIT HOLDER
Apex Tool (442) 2979 Specialty Tools SCRIBER 9-1/4IN
Apex Tool (442)MPN: 2979
SKU: 2979-S03B-442
Dual End Scriber. Sharp, Tempered Point Scribes Metal. Hooked End Removes O-Rings, Seals and Gaskets. Has a 90° Hook. Length: 8". .
Lisle (371) 29350 Combination Disc Brake Kit
Lisle (371)MPN: 29350
SKU: 29350-S03B-371
Designed to Work on Single Piston Disc Brakes that Require the Piston to be Rotated Back into the Caliper as well as Pistons that are Not Rotated. ...
View full detailsLisle (371) 29200 Loosens Rusted, Frozen Nuts, Bolts and Screws. Unique design delivers over 200 f
Lisle (371)MPN: 29200
SKU: 29200-S03B-371
Loosens Rusted, Frozen Nuts, Bolts and Screws. Unique design delivers over 200 ft. lbs. of "Shock Torque." Can be reversed to tighten. Can also be ...
View full detailsLisle (371) 28620 CIRCUIT TESTER WITH
Lisle (371)MPN: 28620
SKU: 28620-S03B-371
CIRCUIT TESTER WITH
Lisle (371) 28440 BULB & SPRING ASS'Y
Lisle (371)MPN: 28440
SKU: 28440-S03B-371
BULB & SPRING ASS'Y