Tools > Punches, Dies, Hooks & Scribes
Filters
- Punch Set (7)
- Centre Punch (14)
- Drive Pin Punch (12)
- Hand Scribe (1)
- Prick Punch (2)
- Nail Set Punch (3)
- Straight Hand Probe (0)
- Starting Punch (0)
- Punch & Chisel Set (0)
- Probe & Hook Set (0)
- Pin Punch (0)
- Number Punch (0)
- Letter Punch (0)
- Hook Scribe (0)
- Hole Punch (0)
- Gasket Cutter (0)
- Drift Punch (0)
- Awl Scratch Punch (0)
- Arch Punch (0)
- Aligning Punch (0)
Square-Head Nail Sets - 53032
StarrettMPN: 53032 Round, knurled grip Large, square head Will not roll Beveled end to prevent breakage Punch surface is cupped to follow the nail without ...
View full detailsSquare-Head Nail Set Punch - 53029
StarrettMPN: 53029 Round, knurled grip Large, square head Will not roll Beveled end to prevent breakage Punch surface is cupped to follow the nail without ...
View full detailsDrive Pin Punches - 52587
StarrettMPN: 52587 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Length" Set of 8 punches (1 of ea...
View full detailsDrive Pin Punches - 52586
StarrettMPN: 52586 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Length" Set of 8 punches (1 of ea...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work nan - 51187
StarrettMPN: 51187 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work - 51186
StarrettMPN: 51186 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsCentre Punches With Round Shanks - 50488
StarrettMPN: 50488 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsPrick Punches - 57078
StarrettMPN: 57078 Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing sha...
View full detailsPrick Punches - 53044
StarrettMPN: 53044 Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing sha...
View full detailsPrick Punches - 816A
StarrettMPN: 816A Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing shar...
View full detailsS800PC Square-Head Punch Set - 64131
StarrettMPN: 64131 Knurled grip for secure holding Large, square head provides a large striking surface Beveled end prevents breakage Cupped punch surface ...
View full detailsSquare-Head Nail Set Punch - 53033
StarrettMPN: 53033 Round, knurled grip Large, square head Will not roll Beveled end to prevent breakage Punch surface is cupped to follow the nail without ...
View full detailsCentre Punch with Square Shank 3/8" - 51282
StarrettMPN: 51282 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punch with Square Shank 3/8" - 51280
StarrettMPN: 51280 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punch with Square Shank 3/8" - 51279
StarrettMPN: 51279 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punches With Round Shanks - 50484
StarrettMPN: 50484 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsCentre Punch with Round Shank - 50482
StarrettMPN: 50482 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsScribe with 3 Tips - 50316
StarrettMPN: 50316Specifications Tip Material Steel
Drive Pin Punches 5/16" - 52585
StarrettMPN: 52585 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/1...
View full detailsDrive Pin Punches 1/4" - 52584
StarrettMPN: 52584 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/4...
View full detailsDrive Pin Punches 3/16" - 52582
StarrettMPN: 52582 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 3/1...
View full detailsDrive Pin Punches 5/32" - 52581
StarrettMPN: 52581 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/3...
View full detailsDrive Pin Punches 1/8" - 52580
StarrettMPN: 52580 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/8...
View full detailsDrive Pin Punches 3/32" - 52579
StarrettMPN: 52579 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 3/3...
View full details7-Piece Centre Punches With Square Shank - S264WB
StarrettMPN: S264WB Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper a...
View full detailsCentre Punch with Square Shank 7/16" - 51284
StarrettMPN: 51284 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punch with Square Shank 3/8" - 51281
StarrettMPN: 51281 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 3/8" - 51185
StarrettMPN: 51185 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 5/16" - 51184
StarrettMPN: 51184 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 1/4" - 51183
StarrettMPN: 51183 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punches For Machine Shop & Motor Service Work 3/16" - 51182
StarrettMPN: 51182 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsDrive Pin Punch for Machine Shop & Motor Service Work 1/8" - 51181
StarrettMPN: 51181 Extra-long, measuring 8" (200 mm) Bodies are 4 1/2" (115 mm) long Drive pin sections are 3 1/2" (90 mm) long Well-proportioned, hardened...
View full detailsCentre Punches With Round Shanks - 50487
StarrettMPN: 50487 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsCentre Punch with Round Shank - 50486
StarrettMPN: 50486 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsCentre Punch with Round Shank - 50485
StarrettMPN: 50485 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsAutomatic Centre Punch - 50120
StarrettMPN: 50120 Rugged automatic punch with all-steel handle and parts Internal mechanism automatically strikes a blow when downward pressure is applied...
View full detailsAutomatic Centre Punch - 18C
StarrettMPN: 18C Rugged automatic punch with all-steel handle and parts Internal mechanism automatically strikes a blow when downward pressure is applied S...
View full detailsDrive Pin Punches 1/16" - 52578
StarrettMPN: 52578 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/1...
View full detailsAutomatic Center Punches with Adjustable Stroke - 53048
StarrettMPN: 53048All working parts are made of tool steel, properly hardened. Hardened tool steel point may easily be removed for resharpening or replacem...
View full details