Tools > Punches, Dies, Hooks & Scribes
Filters
- Aligning Punch (1)
- Arch Punch (8)
- Awl Scratch Punch (1)
- Centre Punch (22)
- Drift Punch (1)
- Drive Pin Punch (18)
- Gasket Cutter (3)
- Hand Scribe (9)
- Hole Punch (1)
- Hook Scribe (4)
- Letter Punch (11)
- Nail Set Punch (3)
- Number Punch (11)
- Pin Punch (15)
- Prick Punch (2)
- Probe & Hook Set (4)
- Punch & Chisel Set (3)
- Punch Set (14)
- Starting Punch (1)
- Straight Hand Probe (1)
Prick Punches - 57078
StarrettMPN: 57078 Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing sha...
View full detailsPrick Punches - 53044
StarrettMPN: 53044 Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing sha...
View full detailsPrick Punches - 816A
StarrettMPN: 816A Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing shar...
View full detailsS800PC Square-Head Punch Set - 64131
StarrettMPN: 64131 Knurled grip for secure holding Large, square head provides a large striking surface Beveled end prevents breakage Cupped punch surface ...
View full detailsSquare-Head Nail Set Punch - 53033
StarrettMPN: 53033 Round, knurled grip Large, square head Will not roll Beveled end to prevent breakage Punch surface is cupped to follow the nail without ...
View full detailsRoll Pin Punch Set - 775526
JET EquipmentMPN: 775526 Made of the highest grade carbon steel, accurately hardened and tempered preventing splintering and extending life Powder coated shank ...
View full detailsHook & Pick Set - 48-22-9218
MilwaukeeMPN: 48-22-9218 Feature an all-metal core for up to 50% more durability This set includes 4 hose picks set and 4 mini picks Comfort grip handles gi...
View full detailsMini Hook & Pick Set - 84040H
GearwrenchMPN: 84040H Variety of shapes to leverage or pull parts, springs, and cotter pins Access around wiring, hoses, and other engine bay obstacles Full ...
View full detailsPunch & Chisel Set - C6LR
Gray ToolsMPN: C6LRIncludes: Flat chisels 1/2" & 5/8", Pin punches 1/8" & 3/16" & 1/4", Centre punch 3/8"Specifications No. of Pieces 6
Pick & Hook Set - 027261
JET EquipmentMPN: 027261 Awl-straight pick Hook tool 45° bent tip tool 90° bent tip tool Specifications No. of Pieces 4
Drive Pin Punch - 75B
General ToolsMPN: 75B Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/32" Overall L...
View full detailsDrive Pin Punch - 75E
General ToolsMPN: 75E Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/16" Overall L...
View full detailsHollow Steel Punch - 1280F
General ToolsMPN: 1280F Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials Sid...
View full detailsDrive Pin Punch - 76E
General ToolsMPN: 76E Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/8" Overall Le...
View full detailsHollow Steel Punch - 1280L
General ToolsMPN: 1280L Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...
View full detailsCentre Punch with Square Shank 3/8" - 51282
StarrettMPN: 51282 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punch with Square Shank 3/8" - 51280
StarrettMPN: 51280 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punch with Square Shank 3/8" - 51279
StarrettMPN: 51279 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...
View full detailsCentre Punches With Round Shanks - 50484
StarrettMPN: 50484 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...
View full detailsAligning Punch - 8388
Gray ToolsMPN: 8388Specifications Point Diameter 7/16" Taper Length 7/8" Overall Length 18"
Scribe with 3 Tips - 50316
StarrettMPN: 50316Specifications Tip Material Steel
Centre Punch 3/8" - C34
Gray ToolsMPN: C34Specifications Point Diameter 1/8" Stock Size 3/8" Overall Length 5"
Pick Hook Tip - 86803
Gray ToolsMPN: 86803Specifications Overall Length 10" Tip Material Steel Blade Length 6"
Center Punch 1/2" - C35A
Gray ToolsMPN: C35A Heat-treated to provide a hard working end and softer striking end to avoid chipping High polished and lacquered working end with royal b...
View full detailsCenter Punch 1/4" - C33A
Gray ToolsMPN: C33A Heat-treated to provide a hard working end and softer striking end to avoid chipping High polished and lacquered working end with royal b...
View full detailsFixed Two Point Scribes - 80
General ToolsMPN: 80 Hardened steel needle points are fixed to knurled body One straight point and one 90° bent point 8 7/16" long Specifications Overall Length...
View full detailsTwo Point Scriber - 380B
General ToolsMPN: 380B Includes: (1) Short straight point, (1) Short 90° point For use on metal, glass, plastics and ceramics Aluminum body with knurled finger ...
View full detailsThree Point Scriber - 380A
General ToolsMPN: 380A Includes: (1) Short straight point, (1) Short bent point, (1) Long bent point For use on metal, glass, plastics and ceramics Aluminum bod...
View full detailsMini Pocket Scriber - 83
General ToolsMPN: 83 For use on metal, glass, plastics and ceramics Aluminum body with knurled finger grip and hardened and centerless ground steel point Point ...
View full detailsLightweight Automatic Centre Punches - 87
General ToolsMPN: 87 One-hand spring impact operation, no hammer needed Lightweight aluminum body with long wearing alloy steel parts Spring tension adjusts for...
View full detailsMini Heavy-Duty Automatic Center Punch 1/2" - 79
General ToolsMPN: 79 One-handed spring impact operation, no hammer needed Spring tension adjusts for light or heavy strokes and marking Specifications Point Dia...
View full detailsHeavy Duty Punch - Automatic Centre - 78
General ToolsMPN: 78Specifications Point Diameter 2/25" Overall Length 6" Material Steel
Scribes - 422-KGSC
King Tool, Inc.MPN: 422-KGSC Giant Scribe Features machined aluminum handles, diamond knurling for comfortable and sure grip, precision ground tungsten carbide sc...
View full detailsCentre Punch 1/4" - 82269
GearwrenchMPN: 82269 Ideal for marking center lines and pilot drill locations Striking end is softened and tapered to reduce chipping Ground surface finish o...
View full detailsExtension Gasket Cutters - Gasket Cutter Kit (Imperial) - No. 4 - AX6040
AllpaxMPN: AX6040 Cuts 1/4" to 49" in diameter Hefty brass cutting head slides easily over a variety of gasket materials Modular extension design allows ...
View full detailsRevolving Punch Pliers 5/64", 3/32", 7/64", 1/8", 5/32",3/16" (2.0, 2.5, 3.0, 3.5, 4.0, 4.5m - 72
General ToolsMPN: 72 Ideal for making miniscule punch holes that would not be practical with a single-style punch The revolving turret offers six distinct punch...
View full detailsScratch Awl - 818
General ToolsMPN: 818 Contoured and fluted hardwood handle Alloy steel blade running through handle is fastened to plated steel ferrule and cap Specifications B...
View full detailsCentering Punch 3/8" - 806
General ToolsMPN: 806 Countersunk end ensures starting hole is centered in hardware screw hole Hardened steel pin Specifications Point Diameter 3/8" Stock Size ...
View full detailsDrive Pin Punch - 75D
General ToolsMPN: 75D Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 5/32" Overall L...
View full detailsDrive Pin Punch - 76B
General ToolsMPN: 76B Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/16" Overall L...
View full detailsDrive Pin Punch - 76A
General ToolsMPN: 76A Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 1/8" Overall Le...
View full detailsHollow Steel Punch - 1280J
General ToolsMPN: 1280J Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...
View full detailsHollow Steel Punch - 1280P
General ToolsMPN: 1280P Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...
View full detailsDrive Pin Punches 5/16" - 52585
StarrettMPN: 52585 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/1...
View full detailsDrive Pin Punches 1/4" - 52584
StarrettMPN: 52584 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/4...
View full detailsDrive Pin Punches 3/16" - 52582
StarrettMPN: 52582 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 3/1...
View full detailsDrive Pin Punches 5/32" - 52581
StarrettMPN: 52581 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/3...
View full detailsDrive Pin Punches 1/8" - 52580
StarrettMPN: 52580 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/8...
View full details