Tools > Punches, Dies, Hooks & Scribes

MPN: 57078 Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing sha...

MPN: 53044 Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing sha...

MPN: 816A Points are carefully ground to the correct taper Sharper than the normal centre punch Allows for exact placement of point, providing shar...

MPN: 64131 Knurled grip for secure holding Large, square head provides a large striking surface Beveled end prevents breakage Cupped punch surface ...

MPN: 53033 Round, knurled grip Large, square head Will not roll Beveled end to prevent breakage Punch surface is cupped to follow the nail without ...

MPN: 775526 Made of the highest grade carbon steel, accurately hardened and tempered preventing splintering and extending life Powder coated shank ...

MPN: 48-22-9218 Feature an all-metal core for up to 50% more durability This set includes 4 hose picks set and 4 mini picks Comfort grip handles gi...

MPN: 84040H Variety of shapes to leverage or pull parts, springs, and cotter pins Access around wiring, hoses, and other engine bay obstacles Full ...

MPN: C6LRIncludes: Flat chisels 1/2" & 5/8", Pin punches 1/8" & 3/16" & 1/4", Centre punch 3/8"Specifications No. of Pieces 6

MPN: 027261 Awl-straight pick Hook tool 45° bent tip tool 90° bent tip tool Specifications No. of Pieces 4

MPN: 75B Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/32" Overall L...

MPN: 75E Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/16" Overall L...

MPN: 1280F Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials Sid...

MPN: 76E Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/8" Overall Le...

MPN: 1280L Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...

MPN: 51282 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...

MPN: 51280 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...

MPN: 51279 Square knurled grip prevents rolling when laid down; hardened and properly tempered Accurately centered tips and ground at the proper an...

MPN: 50484 Made of specially selected steel, hardened and properly tempered Knurled finger grip Points are ground at proper angle to give maximum s...

MPN: 8388Specifications Point Diameter 7/16" Taper Length 7/8" Overall Length 18"

MPN: 50316Specifications Tip Material Steel

MPN: C34Specifications Point Diameter 1/8" Stock Size 3/8" Overall Length 5"

MPN: 86803Specifications Overall Length 10" Tip Material Steel Blade Length 6"

MPN: C35A Heat-treated to provide a hard working end and softer striking end to avoid chipping High polished and lacquered working end with royal b...

MPN: C33A Heat-treated to provide a hard working end and softer striking end to avoid chipping High polished and lacquered working end with royal b...

MPN: 80 Hardened steel needle points are fixed to knurled body One straight point and one 90° bent point 8 7/16" long Specifications Overall Length...

MPN: 380B Includes: (1) Short straight point, (1) Short 90° point For use on metal, glass, plastics and ceramics Aluminum body with knurled finger ...

MPN: 380A Includes: (1) Short straight point, (1) Short bent point, (1) Long bent point For use on metal, glass, plastics and ceramics Aluminum bod...

MPN: 83 For use on metal, glass, plastics and ceramics Aluminum body with knurled finger grip and hardened and centerless ground steel point Point ...

MPN: 87 One-hand spring impact operation, no hammer needed Lightweight aluminum body with long wearing alloy steel parts Spring tension adjusts for...

MPN: 79 One-handed spring impact operation, no hammer needed Spring tension adjusts for light or heavy strokes and marking Specifications Point Dia...

MPN: 78Specifications Point Diameter 2/25" Overall Length 6" Material Steel

MPN: 422-KGSC Giant Scribe Features machined aluminum handles, diamond knurling for comfortable and sure grip, precision ground tungsten carbide sc...

MPN: 82269 Ideal for marking center lines and pilot drill locations Striking end is softened and tapered to reduce chipping Ground surface finish o...

MPN: AX6040 Cuts 1/4" to 49" in diameter Hefty brass cutting head slides easily over a variety of gasket materials Modular extension design allows ...

MPN: 72 Ideal for making miniscule punch holes that would not be practical with a single-style punch The revolving turret offers six distinct punch...

MPN: 818 Contoured and fluted hardwood handle Alloy steel blade running through handle is fastened to plated steel ferrule and cap Specifications B...

MPN: 806 Countersunk end ensures starting hole is centered in hardware screw hole Hardened steel pin Specifications Point Diameter 3/8" Stock Size ...

MPN: 75D Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 5/32" Overall L...

MPN: 76B Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 3/16" Overall L...

MPN: 76A Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Specifications Point Diameter 1/8" Overall Le...

MPN: 1280J Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...

MPN: 1280P Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, ...

MPN: 52585 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/1...

MPN: 52584 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/4...

MPN: 52582 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 3/1...

MPN: 52581 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 5/3...

MPN: 52580 Well proportioned, hardened and properly tempered Knurled finger grip Size of punch is stamped on head Specifications Point Diameter 1/8...