Tools > Cutting Blades And Saws

MPN: 49-56-9607 Each tooth is built with more steel behind the cutting edge for added strength The added tooth strength along with 8% cobalt give a...

MPN: 49-56-5175 Each tooth is built with more steel behind the cutting edge for added strength The added tooth strength along with 8% cobalt give a...

MPN: 49-00-5310 Thin kerf for up to 35% more cuts per charge vs. leading reciprocating saw blades Short blade length for cutting in tight locations...

MPN: 48-01-2787 Optimized tooth design providing 2X more life than our previous generation SAWZALL® blades Grid Iron™ honeycomb pattern increases b...

MPN: 49-59-2188 Dual alternating tooth geometry: Double bevel and flat teeth cut more aggressively and boost chip ejection Long lasting: Proprietar...

MPN: 51.7 Tool-less blade change Lanyard hole Abrasion resistant Safety lock Ergonomic For right and left handers Maximum safety Specifications Sty...

MPN: 24030 Last longer by design New heat/vent expansion slots reduce vibration, providing longer life for the blade and straighter cuts for the us...

MPN: 49-56-0737 These carbide teeth hole saws provide the longest life in general purpose and extreme materials with the ability to cut through sta...

MPN: 49-56-0714 These carbide teeth hole saws provide the longest life in general purpose and extreme materials with the ability to cut through sta...

MPN: 01P100 Delivers the best cutting performance and longest life The perfect tool for enlarging and aligning holes in separate pieces of metal Ta...

MPN: 48-40-4205 Laser-cut vibration dampening slots minimize heat, sound, noise Designed to provide clean cutting and a burr-free finish Cobalt inf...

MPN: DS0908BFD5C Perma-Shield® coating protects the blade from heat, gumming, and corrosion Thick demolition blade body for extreme durability Ultr...

MPN: DS0608BFD5C Perma-Shield® coating protects the blade from heat, gumming, and corrosion Thick demolition blade body for extreme durability Ultr...

MPN: DS0612BWC Perma-Shield® coating protects the blade from heat, gumming, and corrosion 1 in. demolition body for straighter cuts with less vibra...

MPN: DS1205FGC A one-of-a-kind tip design enables faster and easier plunging Hardened cutting edge for long and durable cutting life Not recommende...

MPN: 48-00-5231 Offers a 3 TPI design, which allows for the fastest cutting in clean wood, and a low profile blade geometry designed for root remov...

MPN: 48-00-5521 The best solution for wood and nail embedded wood cutting applications Delivers up to 50X life over standard recip saw blades Heavy...

MPN: 48-40-4345 Teeth designed for clog free cutting and smooth finishes Engineered with cobalt infused tungsten carbide to extend cutting life Cob...

MPN: 49-56-0729 Carbide teeth provide up to 50 times more life than bi-metal hole saws while cutting in high RPM Built utilizing a tough carbide gr...

MPN: D1090X Ideal for portable and low-powered saws on the jobsite Super-thin laser-cut kerf gives extremely fast, durable and clean cuts Specifica...

MPN: 8009838PW10145 High speed steel teeth provide a strong, long lasting cutting edge Bi-metal blades bend and resist breaking and extend blade li...

MPN: 7647975Recyclable packagingSpecifications Material High Speed Steel Mill Diameter 1/4" No. of Flutes 4

MPN: 05B200 Coated with an exclusive mixture of chromium and aluminum (AICrN) and are designed to be used where lubricants are not permitted or pro...

MPN: 05D414 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05D413 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05D410 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05D412 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05A414 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05D409 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05D408 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05A410 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05A409 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05D403 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05D315 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05A407 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05D313 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05D312 Accurately drill large diameter holes in a variety of hard or abrasive materials such as stainless steel, cast iron, tough alloys, or c...

MPN: 05B104 Coated with an exclusive mixture of chromium and aluminum (AICrN) and are designed to be used where lubricants are not permitted or pro...

MPN: 05A401 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05A104 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05B015 Coated with an exclusive mixture of chromium and aluminum (AICrN) and are designed to be used where lubricants are not permitted or pro...

MPN: 05A315 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05A102 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05A101 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05A308 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05A013 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...

MPN: 05A010 Super Speed Tip (SST) cutters are made with a state-of-the-art surface treatment that removes the porosity during the fabrication proce...