Landscaping & Power Equipment

Length: 191/2", Width: 3", Thickness: .21", Material: Steel, Colour: Black, Specific Fit, Inside diameter: .7", Center Bore Shape: Round, Mounting ...

Diameter: 4.9", Width: 1.5", Lug Hole Quantity: 1, Lug Hole Diameter: .5", ID: 3.9", Material: Plastic, Finish, Plastic, Colour: Black, Bolt Patter...

Length: 20 7/8", Width: 2.5", Thickness: .25", Material: Steel, Colour: Black, Specific Fit, Inside diameter: .75", Center Bore Shape: Round, Mount...

Accelerator Pump Included: No, Barrel Quantity: 1, Float Included: No. Interchanges to Zama GND-35 Fits model C1Q, C3, G1L carburetors

Accelerator Pump Included: No, Barrel Quantity: 1, Float Included: No. Interchanges to Walbro D10-HD For HD series carburetors except HD-20, HD-25,...

Accelerator Pump Included: No, Barrel Quantity: 1, Float Included: No.Interchanges to Walbro D10-HDC, D1-HDC

Tooth quantity: 16, Mounting bolt hole quantity: 2, Mounting flange to pinion end at rest: .95", Voltage: 120v, Case grounding: No, Nose cone mater...

Accelerator Pump Included: No, Barrel Quantity: 1, Float Included: No. Interchanges to Zama RB-105 Fits model C1Q carburetors, fits Stihl

Length: 22", Width: 2.25", Thickness: .18", Material: Steel, Colour: Black, Specific Fit, Inside diameter: .7" x .9", Center Bore Shape: Rectangle,...

Drive Links: 66, Pitch: 0.325, Gauge: 0.058, Bar Length: 16.

Material: Steel/Plastic, Type: Quick-Connect Hitch Pin, Length: 9", Width: 3.5", Height: .8", OD: .5".One hand release for easy operation

Mounting bracket included: Snap fit, Terminal quantity: 5, Terminal type: Male spade, Voltage: 12v, Amperage rating: 10 amp, Switch position quanti...

Body material: Aluminum, Body colour: Grey, Barrel quantity: 1, Linkage attached: Yes, Mounting hole quantity: 2, Mounting hole diameter: 0.28", Ga...

Diameter: 8", Width: 2.38", Lug Hole Quantity: 1, Lug Hole Diameter: .5", ID: 5.62", Material: Plastic, Finish: Rubber, Colour: Black, Bolt Pattern...

Drive Links: 10', Pitch: No. 40 Chain, Gauge: 1/2 X 5/16 Chain Size.

Diameter: 0.193", End 1 Type: Z Bend, End 2 Type: Barrel. Interchanges to Stihl 4180 180 1150 Fits models FS87, 90, 100 and 130

Material: Cardboard, Colour: Black, Valley Pan Included: No, Mounting Hole Quanitity: 2, Material Hole Diameter: 0.22", Thickness: 0.02", Gasket Se...

Outside hub diameter: 5.75", Spline quantity: 6, Drop Length: 2", Splined shaft: Yes, Flange thickness: .72", Colour: Grey/Black, Material: Aluminu...

Mounting hole quantity: 1, Mounting hole diameter: .65", Outside diameter: 2.85", Material: Composite, Width: .75", Pulley type: Idler.

Body material: Aluminum, Body colour: Grey, Barrel quantity: 1, Linkage attached: Yes, Mounting hole quantity: 2, Mounting hole diameter: 0.27", Ga...

For: FH430, FH451V, FH500V, FH531V, FH601D, FH641D, FH680D, FH721V, FJ100D and FJ180V. UNSPSC: 26101769

Length: .47", Diameter: .31", End 2 Type: Wire Stop.Universal

Shaft diameter: 1.35", OD: 1.88", Width: .3", Flange material: Rubber, Sealing surface material: Rubber.

For Models: HS40, HS50, H25, H30, H35, LAV25, LAV30, LAV35, LAV40, TVS75, TVS90, TVS100, TVS105. Pkg of 2

Quantity: 1, Wiring harness length: 13", Wire quantity: 1, Terminal gender: Female, Terminal quantity: 1, Terminal type: Spade, Material: Metal, We...

Shape: Round, Height: 3.8" Interchanges to Onan 140-1912-01 Pre-Filter for 7-02715

Diameter 6.8", Width 1.12", ID: 5.25", Material: Plastic, Finish: Plastic, Colocr Chrome.Dress up your lawn tractor or golf cart with custom chrome...

Exhaust Gasket; Kohler; Small Engine Gasket

Gasket Material: Cardboard/Rubber, Gasket Colour: Black/Grey, Oil Seal Included: No, Valley Pan Included: No, Gasket Sealant Included: No, Mounting...

Material: Plastic, Colour: Black, Thread Diameter: 1.35", Depth: 0.55", Vented: No, Lockable: No. Interchanges to Echo 13100448730, 13100455730, 13...

Accelerator Pump Included: No, Barrel Quantity: 1, Float Included: No. Interchanges to Tillotson DG-3HL Fits model HL carburetors

Material: Steel, Colour: Grey, Thickness: 0.7", Cylinder Bore Diameter: 3.45", Face Width: 4.92", Face Length: 6.27", Mounting Hole Quantity: 9, Mo...

Material: Paper, Colour: Brown, Thickness: 0.032", Bolt Hole Quantity: 2, Mounting Hole Diameter 0.2", Intake Port Quantity: 1, Length: 2.47", Widt...

Shape: Round, Height: 2.6" Interchanges to Briggs & Stratton 271962, 271962S, 4110, Kohler 32-083-08-S Pre-Filter for 7-02265

OD: 8" X 3.375", Shape: Rectangle, Height: 0.35". Interchanges to Briggs & Stratton 710268 Pre-Filter for 7-02751

Material: Paper, Colour: Brown, Thickness: 0.03", Bolt Hole Quantity: 2, Mounting Hole Diameter: 0.27", Intake Port Quantity: 1, Length: 2.32", Wid...

Ply Quantity: 4, Tread Depth: Turf Tread, Tire Type: Tubeless.

Mounting hole quantity: 1, Mounting hole diameter: .65", Outside diameter: 3", Material: Composite, Width: .65", Pulley type: Idler.

Ply Quantity: 4, Tread Depth: Highway Rib, Tire Type: Tubeless.

Drive Links: 56, Pitch: 3/8 LP, Gauge: 0.05, Bar Length: 16.

Barrel Quantity: 1, Material: Metal, Sealant Included: No. Interchanges to Tecumseh 631700 For float style carburetors without bowl drain Uses 7-04...

Mounting hole quantity: 1, Mounting hole diameter: .38", Outside diameter: 4.5", Material: Steel, Width: .89", Pulley type: Idler.Interchanges to A...

OD: 1.55", Width: 0.44", Width Inner Ring: 0.44", Width Outer Ring: 0.44", Mounting Seat Minimum OD: 1.38" Mounting Seat Maximum OD: 1.38", With Sl...

Colour: Black And Red, Quantity: 1, Shape: Cylinder, Terminal Quantity: 0, Mounting Hardware Included: No.

Tooth quantity: 10, Mounting bolt hole quantity: 2, Mounting flange to pinion end at rest: 1.3", Voltage: 12v, Case grounding: Yes, Nose cone mater...

Mounting hole quantity: 1, Mounting hole diameter: .66", Outside diameter: 3.46", Material: Plastic, Width: 1.18", Pulley type: Idler.

Position ID: Outside, Face Shape: Round, Face Diameter: 2.26", Minimum Amperage Reading: 0, Maximum Amperage Reading: 20, Illuminated: No, Face Col...