Tools > Landscaping & Power Equipment

Colour: Red, Material: Plastic, Diameter: .155", Length: 18", Line Shape: Round, Spool included: No, Specific.

Colour: Orange, Material: Plastic, Diameter: .1", Length: 855 Ft, Line Shape: Hex, Spool included: No, Universal.

Material: Metal, Colour: Silver, Thickness: 0.11", Cylinder Bore Diameter: 3.5", Face Width: 4.95", Face Length: 5.4", Mounting Hole Quantity: 4, M...

Bearing ID: .5", Bearing OD: 1.37", Width: .52", Bearing generation: Flanged/Wheel.Interchanges to Scag 04050-07

Type: Digital, Face Shape: Rectangle, Face Diameter: 2.2", Body Depth: 0.64", Terminal Type: Wire, Terminal Quantity: 2, Trim Colour: Black, Maximu...

Length: 63", Diameter: 11/64", Material: Nylon, Colour: Black, Type of Strand: Braided.Interchanges to Briggs & Stratton 66884

Connector gender: Male, Connecter shape: Spade, Wire quantity: 1, Wiring harness length: 3", Wire gauge measurement: .05", Terminal gender: Male, T...

Ply Quantity: N/A, Tread Depth: N/A, Tire Type: Tube.

Size: 410 x 350-6. Stem Angle: 90°

Colour: Black and Red, Quantity" 1, Shape: Cylinder, Terminal quantity: 0, Mounting hardware included: No. For models CH11-14, M10-16 7-07461 Gromm...

Colour: Black, Material: Plastic, Diameter: .128", Length: 150 Ft, Line Shape: Round, Spool included: No, Universal.

Mounting hole quantity: 1, Mounting hole diameter: .49", Outside diameter: 4.61", Material: Plastic, Width: .97", Pulley type: Idler.Interchanges t...

Ply Quantity: 4, Tread Depth: Saw Tooth, Tire Type: Tubeless.

Length: 18 5/8", Width: 2.5", Thickness: .21", Material: Steel, Colour, Black, Specific Fit, ID: .80", Center Bore Shape: Round, Mounting Hole Quan...

5.5 gallon container. Deluxe hose included. Ergonomic handle for better venting. NOT a portable fuel container as described by ASTM, EPA, ARB or ot...

Body material: Aluminum, Body colour: Grey, Barrel quantity: 1, Linkage attached: Yes, Mounting hole quantity: 2, Mounting hole diameter: 0.26", Ga...

Body Diameter: 3.07", Body Height: 0.07", Body Length: 2.8", Body Width: 3.07", Reversible: No, Specific Fit. Interchanges to Honda 18381-ZE2-W10 F...

Length: 2.19", Width: 1.24", Thickness: 0.009", Material: Rubber, Mounting Hole Quantity: 7, Mounting Hole Diameter: 0.16", Mounting Hardware Inclu...

Tooth quantity: 10, Mounting bolt hole quantity: 2, Mounting flange to end of case: 6.1", Mounting flange to pinion end at rest: .3", Voltage: 12v,...

Diameter: 4.85", Width: 2.54", Lug Hole Quantity: 1, Lug Hole Diameter: .625", Inside Diameter: 3.15", Material: Plastic, Finish: Plastic, Colour: ...

STARTER HANDLE Replaces: Husqvarna 5035439-01, 5015514-02, 5015514-01 (Std. Models 268K, 272K, 371K, 375K, 3120K cut-off saws).

Colour: Orange/Grey, Material: Plastic, Diameter: .1", Length: 73 Ft, Line Shape: Square, Spool included: No, Universal. Premium grade Professional...

Mounting hole quantity: 1, Mounting hole diameter: .37", Outside diameter: 4.5", Material: Steel, Width: 1.13", Pulley type: Idler.Interchanges to ...

Length: 1.81", Hex Size Top: 11 MM, Hex Size Bottom: 10 MM, Thread Type: No.1/4-20, Shaft Diamter: 0.25".Interchanges to Ariens 5907100, 51001600, ...

Material: Graphite, Colour: Black, Thickness: 0.07", Bolt Hole Quantity: 2, Configuration: Straight Across.Interchanges to Kohler 235122

Bolt Hole Quantity: 8, Mounting Hole Diameter: 0.33", ID: 7 1/8" X 8", Length: 8 3/4", OD: 8 3/4" X 7 3/4", Face Width: 0.30", Material: Cardboard,...

Shaft Diameter: 1.00", OD: 1.50", Width: 0.30", Flange Material: Rubber, Sealing Surface Material: Metal.

Body Diameter: 4.5", Body Height: 2", Body Length: 5.18", Body Width: 4.25", Heat Shield Attached: No, Inlet ID: 0.82", Inlet Quantity: 1, Inlet Ty...

Length: 1.1", Inlet OD: 1.53"Replacement bowl for 7-02350

Material: Steel, Type: Flywheel Puller, Length: 2.6", Width: 2.29", Height: 0.8", Case Included: No. For Briggs & Stratton engines Place over c...

For Models: N, 5S, 6F, 6R, 6, 6S, 6-SFB, 6-SF, 6B, 6B-SFB, 6B-FB, 6B-H. For Models: 6B-HS, 6B-R6, 8F, 8R, 8B-FB, 8B-R6, 8, 8P

1 per package. Chain size: No. 60 chain - 3/4" x 1/2"

Accelerator Pump Included: No, Barrel Quantity: 1, Float Included: No. Interchanges to Briggs & Stratton 494623 For 3 -4 HP Vertical (Pulsa-Jet...

Material: Cardboard, Colour: Black, Thickness: .03", OD: 1.78", ID: 1.01". Interchanges to Briggs & Stratton 692667 For 12 CID OHV vertical sha...

Length: 2.19", Width: 1.24", Thickness: 0.009", Material: Rubber, Mounting Hole Quantity: 7, Mounting Hole Diameter: 0.16", Mounting Hardware Inclu...

Tread Depth: Turf Saver, Tire Type: Tubeless.

Size: 20.5 x 800/1000-10. Stem Angle: Straight. Interchanges: Laser: 92423, Oregon: 71-100, Rotary: 7828, Stens: 170-100

Mounting hole quantity: 1, Mounting hole diameter: .37", Outside diameter: 4.12", Material: Steel, Width: 1.05", Pulley type: Idler.Interchanges to...

Mounting hole quantity: 1, Mounting hole diameter: .75", Outside diameter: 4.25", Material: Metal, Width: .75", Pulley type: Idler.Interchanges to ...

Shape: Round, Height: 3" Interchange to Honda 17218-ZE3-000, 17218-ZE3-505, Honda Code 2577377 Pre-Filter for 7-02752

Material: Rubber/Cardboard/Metal/Cork, Colour: Black/Green/Brown, Oil seal included: Yes, OIl Seal ID: .64", Oil seail OD: 1.02", O-Ring included: ...

Colour: Black, Seat included: No, End 1 OD: .25", End 2 OD: .25", End 2 type: C-Loop, Installed height: 1.35", Coil quantity: 11, Max OD: 5.3", Max...

Shape: Round, Height: 2.3" Interchanges to Briggs & Stratton 692520, John Deere M146736, M149119, Kawasaki 11013-7007, 11013-7023, Onan 140-149...

Tooth quantity: 15, Mounting bolt hole quantity: 2, Mounting flange to pinion end at rest: 1.25", Voltage: 12v, Case grounding: Yes, Nose cone mate...

Length: 21 5/8", Width: 2.5", Thickness: .17", Material: Steel, Colour: Black, Specific Fit, Inside diameter: .63", Center Bore Shape: Round, Mount...

Mounting hole quantity: 1, Mounting hole diameter: .35", Outside diameter: 3.5", Material: Composite, Width: .75", Pulley type: Idler.Interchanges ...

ID: 3", OD: 5.96", Bolt Circle Diameter: .32", Mounting Hole Diameter: .32", Brake Surface Finish: Steel, Material: Steel.For John Deere models 828...