Tools > Lubrication Systems

Lincoln Mechanical Lube Meter - Preset Quarts / Liters Meter. Features: Dispense oils, ATF, and antifreeze. One model can dispense pints, quarts, l...

Replaces 1842 and 1862. Stable 3-point stance keeps the tool upright and within reach. Electronically controlled two-speed motor. Balanced and ligh...

5/8 In. diameter head. 1/8 In. PTF thread. Overall length 3/4 In. Shank length 23/64 In. Hex size - 5/8 In. 5/8 In. diameter head 1/8 In. PTF threa...

18 In. Length. Both ends have 1/8 In. NPT (m) thread. Burst pressure - 14,000 PSI. Working Pressure - 3,500 PSI.

Clamps to any original 25 to 50 Lb. refinery container. Handles medium and light lubricants in any weather. Rust resistant.

Includes bung bushing, suction tube, hose and coupling assembly. Thread size - 1 in. NPT (f). Remote suction kit. 1" NPT(f). Includes 5' oil hose, ...

For pumping oil, ATF and gear oil. Proven horizontal, valved-piston motor design for simplicity and reliability. Provides quick dispense, fill or t...

Lincoln 1888 PowerLuber 20-Volt Lithium-Ion High Pressure 2 Speed Cordless Grease Gun. 2 Battery Kit. Lincoln has introduced its PowerLuber series ...

4,500 PSI Maximum Operating Pressure. Thread size - 1/8 In. NPT (m). Strategically placed coil spring provides nonslip, push-pull grip and prevents...

Lightweight, corrosion resistant zinc head casting design incorporates uniform wall thickness and an integral patented muffler keeps noise level be...

24 assorted grease fittings in six popular sizes blister-packed on one card. The ball check in the head of the fitting prevents dirt and grit from ...

For tap repair of 1/4 In.-28 damaged threads. For removal of 3/8 In. and 5/16 In. Hex, straight or angle fittings. For retapping holes for new fitt...

5182 Taper Thread Grease Fitting - 45 ° Angle, M10 Thread Size, Metric Thread Type. Fitting Thread Size M10. Fitting Thread Type Metric. Ball Check...

LINCOLN INDUSTRIAL 83938. STRAIGHT HIGH-PRESSURE GREASE SWIVEL FOR CONTROL VALVES & METERS. Configuration - Straight. Thread Size - 1/4" NPT(m)...

Features electro-static, corrosion-resistant finish and non-slip knurling for better grip. Steel block head offers protection for hardened steel pl...

21 V max output/ 18 V nominal output. Capacity 3000mAh. Constant output for fade free power. Three times as many recharges vs. Ni-Cad battery. Char...

5010 Thread-Forming Grease Fitting. Head Angle: Straight, Fitting Thread Size: 1/4-28", Hex Size: 5/16".

Lincoln Universal Bearing Packer will pack bearings up to 4-1/2" ID while forcing out old Grease. Can be used with any Guardian Grease Gun.

Lincoln Model No. 5400 Bulk Fittings: 1/8" Thread - 90° angle.

Knurled body and mill flats for easy use, installation and removal. 1/8 In. NPT. For use with most hand-operated grease guns. 4-jaw design. Working...

Control valve for dispensing fluids. Maximum operating pressure 1500 PSI. Inlet 3/4 Inch NPT (f). Flexible hose, manual tip.

12 In. Length. Both ends have 1/8 In. NPT (m) thread. Burst pressure - 14,000 PSI. Working Pressure - 3,500 PSI. HEX - 1/2 In. 12 In. Length Both e...

Lincoln Oiler Can 16 Oz. with Flexible Spout - G507.

Perfect for draining and filling differentials, clutches, power steering reservoirs and transmissions. Needs no priming. Features heavy-duty steel ...

Two hydraulic couplers in the same clamshell as model 5852. Grease Couplers. Hydraulic couplers - standard. 6,000 psi (408 bar) maximum operating p...

For tap repair of 1/8 In. damaged threads. For removal of 7/16 In. In. Hex, straight or angle fittings. For retapping holes for new fitting install...

Can be mounted to almost any surface. Holds grease guns and suction guns with 2-1/4 In. barrel. Holds guns until ready to use. Not for use with CLR...

Thread - 1/8 In. NPT (m). Includes ball check. Enables hand guns to be loaded using filler pump method. Thread - 1/8 In. NPT (m) Includes ball chec...

1/8 In. NPT. Knurled body. Hex base for proper installation and removal. 1/8 In. NPT Knurled body Hex base for proper installation and removal

The ball check in the head of the fitting prevents dirt and grit from getting into the bearing. The fittings have a specially formed lip at the fit...

300 PSI Maximum Operating Pressure. Length - 2 In. Inlet 1/4 - 18 In. NPT. Operating temperature from -67 deg. F to +225 deg. F. Seal material - lo...

7,000 PSI Maximum Operating Pressure. Recessed straight extension with quick-connect locking sleeve. Length - 6 In. Includes extension nozzle and q...

Fits 16 to 55-gallon drums. Delivery rate 10 Oz. per stroke. Includes standard bung bushing. Fits 16 to 55-gallon drums Delivery rate 10 Oz. per st...

85627. 1 Inch. Aluminum. Buna-N. 1 Inch NPT Inlet and Outlet. 45 Gallon Delivery. Application is for New/used oil and AntiFreeze. Air-Operated Diap...

The 1/8 In. pipe threaded fittings are constructed for additional strength. Popular for use in the construction and agricultural industry and large...

SM SWIVEL, STRAIGHT

642006 : Industrial-Style Couplers & Nipples for 3/8" ID (64 Series). Maximum operating pressure 250 psi. Maximum air flow 108 scfm at 100 psi....

1/8 In. NPT (f) inlet. Jaws are fully hardened for extended service life. Hardened coupler body and swivel joints withstand high-pressure applicati...

For use with any 25-50 lb. container. 11 In. Internal Diameter. 4.87 In. Height. Includes 4 hard rubber wheels 1 In. wide and 2-1/2 in. in diameter...

Compact and lightweight. Lever-action design produces 6000 PSI, far exceeding mini pistol-grip models. Cast aluminum head, powder coated barrel, co...

1,000 PSI Maximum Operating Pressure. Fits all standard 1/8 In. NPT grease hoses. Length - 5.4 In. 1,000 PSI Maximum Operating Pressure Fits all st...

Pump length 17.5 In. Fits 5 to 55 Gallon drums. Material: Plastic. Pump length 17.5 In. Fits 5 to 55 Gallon drums Material: Plastic

7,000 PSI Maximum Operating Pressure. 1/8 In. NPTF Outlet. Angle body with quick-connect locking sleeve. Length - 3-1/4 In. 7,000 PSI Maximum Opera...

Cast iron pump head. For transfering pretroleum-based, non-corrosive fluids. Delivery - 1 gallon per 18 revolutions of handle. Comes with standard ...

Maximum pressure 6,000 PSI. Fast, one-hand operation. Rugged cast pump head for strength and durability. Bulk capacity 16 oz./Cartridge 14.5 oz. In...

Max. operating pressure - 4000 PSI. For pull-on, push-on or hook-on service. 7/16 In. -27 (f) thread. For use with 5/8 inch diameter button-head fi...

Lincoln 1340 Lever Action Fluid Barrel Pump. Pumps .42 quarts per stroke. Brass piston rings provide excellent fluid compatibility and long pump li...

Perfect for draining and filling differentials, clutches, power steering reservoirs and transmissions. Does not need priming. Features heavy-duty s...