Tools > Specialty Hand Tools

Fits 1" and 1 1/16" Switches Up To 1 5/8" Long. One socket with the correct length to fit 1" and 1 1/16" oil pressure switches (for vehicles equipp...

12050. SMALL MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

Makes it Easier to Insert Bearing Race. Insert bearing race quickly, straight in on FIRST TRY! Helps reduce damage to both race and axle housing. S...

Remote Control Starter Switch. Use to Bypass the Ignition Switch on Any Engine With a Solenoid Starter Switch. Switch Lets You Crank the Engine Whi...

Use with a Breaker Bar to Loosen Stubborn Oxygen Sensors. Tool comes with both 1/2” and 3/8” drive. Attach a 1/2” breakerbar on the end of the tool...

20 oz. Fiberglass Rip Claw Hammer. The Crescent Fiberglass Rip Hammer sports a forged steel head with Permabond technology to ensure a durable conn...

Lisle 12320 Line Sockets, 19mm & 22mm Lisle 12320 Line Sockets, 19mm & 22mm Lisle 12320 Line Sockets, 19mm & 22mm

Designed for Easy Access on NOx and Soot Sensors. Includes 24mm & 30mm offset sockets with 1/2" drive. Each socket has 6 and 12 point options. ...

12220. NOX SENSOR THREAD CHASER M20. Cleans Threads in NOx Sensor Holes. Use with 13/16" hex socket or 3/8" square drive to restore M20x1.5 NOx sen...

Double Ended Tool for Removing and Installing Brake Springs. Use plier tips to stretch brake spring. Handle ends remove and install spring over anc...

Lenox Demolition 12RKD 12-Piece Reciprocating Saw Blade Kit (1214412RKD).

LENOX GENERAL PURPOSE RECIPROCATING SAW BLADE KIT, 9 PIECE. POWER BLAST TECHNOLOGY™ INCREASES BLADE LIFE. High speed blasting along the cutting edg...

88300 LIGHTWEIGHT HACKSAW. HIGH TENSION - Saw will tension up to 30,000 PSI. EASILY ADJUST TENSION. ERGONOMIC GRIP. Front handle grip reduces fatig...

Model Number Compatibility: 12123R1 Plastic Tubing Cutter

LENOX S1 PLASTIC TUBING CUTTERS - PEX Cutter. PERFECT CUTS. STRAIGHT AND EASY. Serrated Stainless Steel blade requires less force to make a cut, le...

12060. LARGE MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

Cleans dirt and corrosion from battery terminals and cable clamps. The external brush cleans cable clamps and internal brush cleans terminal posts....

LENOX GENERAL PURPOSE RECIPROCATING SAW BLADE KIT, 15 PIECE. 5 of 614R – 14TPI - 6 x 3/4 x .035. 5 of 618R – 18TPI - 6 x 3/4 x .035. 5 of 656R – 6T...

11450. REPLACEMENT BLADE for a 11420 Hose Cutter.

Cuts Flexible Hose up to 1 1/4". The Hose Cutter will cleanly cut heater hoses, fuel lines, and other types of flexible hose up to 1 1/4". The stai...

16 oz. Fiberglass Rip Claw Hammer. The Crescent Fiberglass Rip Hammer sports a forged steel head with Permabond technology to ensure a durable conn...

A Special Tool for a Special Job. Coil Spring cutters polish the battery contact while stainless steel brushes clean the cable terminals.

Fuel Rail Cap 2Cap Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics. (Ford 6.7L 2011-2022, Cummins 5.9L 2003-2009, Duramax 6.6L 200...

10550. SET REPLACEMENT STONES for 10500 Brake Cylinder Hone.

For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm). Special abrasive pads polish the cylinder without cutting. Controlled pressure, three a...

10050. Brake Cylinder Hone STONE SET. Stone Set for 10000. 240 grit, 1-1/8" long stones.

28" ACSR, Wire Rope and Cable Cutter. Shear-cut blades. Cuts soft and hard steel cable, wire rope, and small ACSR cable. Cuts Up to 3/8 in wire rop...

Tough ABS construction. SK5 steel blade stays sharp longer. Blades snap off for new cutting edge. Uses 18mm blades 18 mm SK5 Steel

36" Shear Type Cable Cutter for Wire Rope up to 5/8". Notched, shear-cut blades hold and lock cable in cutting position. Cuts steel cable, coarse o...

Cushion grip. Mirror diameter: 2-1/4". Extends: 9-3/4" to 36-1/2"General Duty

Cushion grip. Mirror diameter: 2-1/4". Extends: 9-3/4" to 36-1/2"General Duty

For removal of filters 2-3/4" to 3-5/8" in diameter. Cushion handles. Slip joint. For removal only

Capacity: 3.5 lbs. 5-1/4" - 28" longGeneral Duty

Awl-straight pick. Hook tool. 45° bent tip tool. 90° bent tip tool

Allows you to quickly compress the coil spring to replace shock absorbers, spring sets, repair bent strut or strut tube and repair damaged spindle

Tough ABS construction. SK5 steel blade stays sharp longer. Blades snap off for new cutting edge. Uses 18mm blades 18 mm SK5 Steel 10PK | General P...

Left cut, right cut, straight cutAlloy Steel | Dual Moulded Non-Slip

General purpose bolt cutters that will get the job done quickly and efficiently. The rubber grip provides maximum comfort and control and the blade...

Uses 10" or 12" blade

18" Industrial Grade Center Cut Cutter. The H.K. Porter18-inch industrial grade bolt cutter is perfect for general use industrial jobs and plant ma...

Cushion-grip. Capacity: 3.5 lb. Extends: 6-1/4" - 33-1/4"

Hardened alloy steel blades. Serrated blades prevent material from slipping out of jaws. Colour-coded soft grip handles for superior grip and user ...

Drop forged alloy steel. Cushion-grip handles for comfort Double Dip PVC Handle| Alloy Steel| Open Stock Length (in.) - 8

24" Industrial Grade Center Cut Cutter. Drop-forged precision ground, alloy tool steel jaws with center-cut blades. Cut materials up to Brinell 455...

Dynaline Bin Box. A great way to organize small parts Corrugated cardboard box with dividers. Dimensions: 11-11/16”L x 4-7/8”W x 3-13/16”H.