OTC/Bosch

1-TON, GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from quali...

1-TON, GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller. Remove and install parts for fast, effective repairs. The puller is forged from qualit...

Hex nut: 3/4"–16 (5PK)

2-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

PULLER 5-TON 2-JAW (REV.) 5-TON, GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The...

7-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

7-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

17-1/2 TON GRIP-O-MATIC PULLER. Mechanical Grip-O-Matic Puller. Remove and install parts for fast, effective repairs. The puller is forged from qua...

171/2-TON HYDRAULIC GRIP-O-MATIC PULLER (PULLER ONLY) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with...

30-TON HYDRAULIC GRIP-O-MATIC PULLER (PULLER ONLY) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a ...

PULLER LEG SET (15-3/4IN LONG)

PUSH-PULLERS® LEGS. Extra Legs (pair) for No. 938 17-1/2 Ton Push-Puller and No. 1062 and 1063 17-1/2 Ton Capacity Hydrualic Pullers. Leg Length 30...

BEARING SPLITTER - Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extre...

BEARING SPLITTER - 1/2IN-5-3/4 BEARING SPLITTERS - Features "knife-like" edges which are easily placed behind the part to secure a gripping surfac...

INTERNAL PULLING ATTACHMENT

SLIDE HAMMER PULLER WITH CUP PULLING ATTACHMENT - This puller combines a basic slide hammer unit with a No. 1152 Internal Pulling Attachment. Ideal...

PILOT BEARING PULLER - Versatile puller built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobil...

PILOT BEARING PULLER. Versatile puller built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobile...

SILVER SLAPPER 8-WAY SLIDE HAMMER PULLER SET - Use for 2/3-way internal or external jobs. Pull flange-type rear axles, stubborn oil seals and beari...

MANUAL SLEEVE PULLER SET - Sleeve Puller/Installer Sets: These sets work on a wide array of truck, bus, and tractor engines, as well as those in ot...

Designed to work with set Nos. 1200, 1202, and 1203, these removal plates fit the full spectrum of cylinder sleeve sizes. Determine engine bore siz...

STINGER BRAKE DRUM DOLLY

OTC 16002 Caster, Swivel 4"

17-1/2 TON CAPACITY HYDRAULIC PULLER SET - Hydraulics: 4002 - Single stage hydraulic hand pump assembly, 4120A - 17-1/2 ton ram with threaded inser...

SENSOR, REPLACEMENT O2 SENSOR, REPLACEMENT O2

OTC Bosch 1699501320 BAT 120 Battery and Starter/Charger System Tester for use with Bosch ADS 325/ADS 625 Encore/Evolve Diagnostic Tools. The BAT 1...

Sp0F000009 Bosch Metric

ENGINE SUPPORT BAR (3-POINT) 700 lb. capacity - cutting edge, design self-centers load to prevent tipping on inclined surfaces. smooth sliding legs...

PRESS V-BLOCKS (PAIR); Included in Set for part number 1882 (55-Ton Press Accessory S.

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

8-PT LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with 3...

BUDD WHEEL SOCKET SET (5 PIECE) - One each of the sockets listed below comes in a convenient storage box. The metric sizes work on the import truck...

OTC 1947A 41mm Budd Wheel Socket. 41 millimeter hex socket with 21 millimeter square. Works on import truck Budd wheels. Extra deep design lets you...

BUDD WHEEL SOCKET - 1" 1-1/2" hex.

54MM TRUCK WHL BEARING LOCKNUT

METRIC TRUCK WHEEL BEARING LOCKNUT SOCKET - Specially designed socket easily removes or installs locknuts. Made of high strength steel and resist r...

120MM TRUCK WHL BEARING LOCKNU

2-5/8" (6 PT.) TRUCK PINION LOCKNUT SOCKET. Socket has 3" of useable depth, 4" overall length. Eliminates modifying standard socket to provide nece...

Press Cable

Ball Joint Installer Adapter 204-355/1

REAR CUP BEARING REPLACER

GRIP WRENCH ADAPTER - For grip wrenches using single-lead thread adjusting screw. Adapter threads onto a slide hammer with a 5/8"-18 thread. Grip w...

COUPLER SOCKET FOR OTC KIT 7797

RETAINING RING PLIERS REPLACEMENT TIPS - Pair of replacement tips for 7295 retaining ring pliers.

Scan Tool Cable / Diagnostic DB 25 Adapter Cable.

STANDARD DIE SET FOR NO. 7402 - Standard die set for No 7402. Includes 6 dies: threads per inch - 4, 5, 6, 7, 7-1/2, 8, 9, 10, 11, 11-1/2, 12, 14, ...