FleetSpec

Replaces R801071, R801074, R802490 R802491, R801075. Notes :This unit is Type 3, "unhanded". Supplied with a FS-R810019 Clevis. Spline 1-1/2 - 28. ...

Notes: This unit is Type 1, "Left Hand". Supplied with a FS-R810019 Clevis. Spline 1-1/2 - 28. Arm Length 5-1/2". Application Steer / Drive / Trail...

Notes This unit is Type 2, "Right Hand". Supplied with a FS-R810019 Clevis. Spline 1-1/2 - 28. Arm Length 5-1/2". Application Steer / Drive / Trail...

Notes This unit is Type 1, "Left Hand". Supplied with a FS-R810019 Clevis. Spline 1-1/2 - 28. Arm Length 6". Application Steer / Drive / Trailer axle.

Notes This unit is Type 2, "Right Hand" Supplied with a FS-R810019 Clevis. Spline 1-1/2 - 28. Arm Length 6". Application Steer / Drive / Trailer axle.

Notes: Large and Small Pins, with Cotter Pins.

FleetSpec (183) (183) ArvinMeritor style ASA CLEVIS kit Condition New. Equivalent To ArvinMeritor ASA Clevis Assemblies. Replaces Euclid E-11430A. ...

AIR BRAKE - CLEVIS PIN - Replaces ArvinMeritor R801732.

Small Pin For Fs-R810019 (Repl. Meritor R801730

Replaces Meritor 810021 Euclid E-11900. Thread 5/8". Notes Supplied with both 1/2" and 1/4" Pins. Length "L" 1-3/4". Length "S" 1-3/8".

Cracks @ 4.0 PSI. Delivery Ports (4) Vertical 3/8" PT. Note 1 Mounting Bracket included.

Cracks @ 5.5 PSI. Delivery Ports (2) 1/2" PT Horizontal Ports Note 1 Mounting Bracket included. Supply Ports (2) 1/2" PT.

Cracks @ 5.5 PSI. Delivery Ports (4) 3/8" PT 2 Horizontal, 2 Vertical. Note 1 Mounting Bracket included.

AD-9 style Air DRYER, New. 12V, 75W, 1/2" Supply & Delivery Note 2 With Mounting Bracket. Application Truck & Tractor apps.

Bendix R-12 style RELAY Valve, New Cracks @ 4.0 PSI. Delivery Ports (4) 3/8" PT 2 Horizontal, 2 Vertical. Note 1 Mounting Bracket included.

Replaces Bendix 065344, K041876. Notes: Supplied with a Straight Yoke, and a 5/8-18 "Easy-On" Standard Adapter. Spline 1-1/2 - 10. Arm Length 6".

Replaces Bendix K033223. Reservoir Nipple 1/2" PT. Notes: WITH Anti-Compounding feature.

AD-IP style DRYER, 12V Heater, New With Mounting Bracket Ad-Ip Bendix Style Air Dryer 12V (W/ Bracket

Ad-Ip Bendix Style Repl. Cartridge

Cracks @ 4.0 PSI. Delivery Ports (4) Vertical 1/2" PT. Note 1 Mounting Bracket included.

Bendix Ad-4 Desiccant Cartridge

Ad-4 Ad-9 Mounting Bracke

Air Dryer Cartridge. Bendix 107796 AD-9 Desiccant Cartridge Kit. AD-9 Desiccant Cartridge. Coalescing: No. Cross References: 107796, 060-107796, 10...

Replaces Bendix Puraguard Style 107796PG.

Adip Adis Adsp Thermostat Kit 12. Plug Colour: White.

plug colour: white

24V 75W Ad9 Thermostat Kit - plug colour: grey

Wabco Heater Power Harness. Replaces Bendix 109869 Wabco SRWABC002.

Terminals No.10-32. Notes Contacts Close at 5 PSI.

Terminals Dual. Notes: Contacts CLOSED below 60 PSI (± 6 PSI).

Delivery Ports (2) 3/8" PT. Supply Port 3/8" PT.

Cracks @ 0 PSI. Delivery Ports (2) 3/8" PT. Supply Port 3/8" PT. Notes Metallic construction.

Replaces Bendix 5007834.

Delivery 1/8" PT. Release @ 20 PSI. Shaft 3/8".

Nominal Closing Pressure 85 PSI. Notes Both Ports are 1/4" PT.

Mounting Flange Spacing 2-1/2". Note 1 Port "A" is a 3/4" PT Supply. Service Port Rotation 180 ° as seen from the top.

Del."C" Ports (2) 3/8" PT

Notes: High temperature and waterproof. Comes with Mounting Gasket & 4 Plugs Operating pressures: Cut-In: 105 PSI Cut-Out: 125 PSI.

DV-2 AUTOMATIC DRAIN VALVE. Mount Port " A".

Nominal Closing Pressure 70 PSI. Ports Both Ports are 1/4" PT.

Color Red. Note 1: Button supplied with a Roll Pin. Shaft Fits a 3/8" Shaft. Text Upper: Push to charge Middle: TRAILER Air Supply Bottom: Not for ...

Yellow Knob For Bendix MV-3.

Ad-Ip Bendix Style Mounting Bracket Ki

Notes: Governor preset to 130 PSI. Check Valve Maintenance Kit. Breather included.

BENDIX AD-IS DELIVERY CHECK VALVE KIT

Ad9 Purge Valve Kit - Hard Seat

Ad9 Purge Valve Kit - Soft Seat

BENDIX AD-IS AIR DRYER 12V - REMAN OUTRIGHT FS5010133XO Bendix AD-IS Air Dryer 12V - Outright Reman