Milton

With a 2' angled extension, this safety blow gun is great for hard to reach areas. Has an air inlet of 1/4" NPT and a maximum working pressure of 1...

With a 4' angled extension, this safety blow gun is great for hard to reach areas. Has an air inlet of 1/4" NPT and a maximum working pressure of 1...

With its 2' angled extension, this siphon spray blow gun is perfect for degreasing engines, shop floors, spraying livestock or plants and other liq...

Hose ferrule tool is made of high strength ductile iron casting and is used to crimp ferrules on to hoses from 1/4" single braid to 3/8" two braid ...

This 50 foot deluxe heavy duty EPDM rubber hose is designed for tough service station and shop applications. This 2 braid hose is kink resistant an...

Thermoplastic PVC hose with 3/8" ID is lighter in weight than standard air hoses. For use with compressed air, water and/or mild chemicals, this 50...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 7/8" OD and a 0.900 ID. Note that rubber hose tolerances vary ...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 1/2" OD and a 0.525 ID. Note that rubber hose tolerances vary ...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 9/16" OD and a 0.562 ID. Note that rubber hose tolerances vary...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 19/32" OD and a 0.593 ID. Note that rubber hose tolerances var...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 5/8" OD and a 0.625 ID. Note that rubber hose tolerances vary ...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 21/32" OD and a 0.656 ID. Note that rubber hose tolerances var...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 11/16" OD and a 0.687 ID. Note that rubber hose tolerances var...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 23/32" OD and a 0.718 ID. Note that rubber hose tolerances var...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 3/4" OD and a 0.750 ID. Note that rubber hose tolerances vary ...

This 12 foot nylon ReKoil hose is assembled with reusable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon re...

This 25 foot nylon ReKoil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon r...

This 1/4" ID MNPT swivel hose end will replace or enhance hose ends on Milton nylon ReKoil hoses. Includes one 1/4". hose inside diameter male swiv...

This 50 foot nylon re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon ...

This 10 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 30 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 3/8" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 25 foot nylon re-koil hose is assembled with re-usable, full flow 3/8" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon ...

This 25 foot nylon re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon ...

Designed specifically for Milton push on and lock on hoses, these 1/4" MNPT brass hose ends fit a 1/4" hose ID. These hose ends require no clamps o...

Designed specifically for Milton push on and lock on hoses, these 3/8" MNPT brass hose ends fit a 3/8" hose ID. These hose ends require no clamps o...

These 1/4" hose barbs feature a steel drag guard to prevent accidental uncoupling. M style couplers offer a basic flow size of 1/4" and have a maxi...

These 3/8" hose barbs feature a steel drag guard to prevent accidental uncoupling. M style couplers offer a basic flow size of 1/4" and have a maxi...

These 3/8" hose barbs are made of case hardened steel and are plated to resist rust. M style plugs offer a basic flow size of 1/4" and have a maxim...

3/8" NPT push on and lock on brass hose menders are specifically designed to fit Milton push on and lock on hoses with a 3/8" ID. 3/8" national pip...

1/4" FNPT straight through couplers are designed for use with high pressure washers and industrial carpet cleaners. These couplers have a maximum w...

1/4" MNPT straight through couplers are designed for use with high pressure washers and industrial carpet cleaners. These couplers have a maximum w...

1/4" MNPT straight through plugs are made of case hardened steel and are plated to resist rust. Designed for use with high pressure washers and ind...

1/4" FNPT straight through plugs are made of case hardened steel and are plated to resist rust. Designed for use with high pressure washers and ind...

3/8" FNPT straight through couplers are designed for use with high pressure washers and industrial carpet cleaners. These couplers have a maximum w...

3/8" MNPT straight through plugs are made of case hardened steel and are plated to resist rust. Designed for use with high pressure washers and ind...

3/8" FNPT straight through plugs are made of case hardened steel and are plated to resist rust. Designed for use with high pressure washers and ind...

3/8" T style push on and lock on hose barb plugs are made of case hardened steel and are plated to resist rust. Specifically designed for Milton pu...

1/4" T style push on and lock on hose barb couplers are specifically designed for Milton push on and lock on hoses with a 1/4" ID. Perfect for indu...

1/4" H style push on and lock on hose barb couplers are specifically designed for Milton push on and lock on hoses with a 1/4" ID. Perfect for larg...

Milton (625) (625) Milton 1803 1/4" FNPT P Style Coupler 1/4" FNPT P style coupler bodies are made of heavy duty steel and have 8 locking balls for...

1/4" MNPT P style coupler bodies have 8 locking balls and a Buna-N seal for better retention of plugs. P style couplers have 3/8" basic flow size a...

Milton (625) (625) Milton 1805 3/8" FNPT P Style Coupler 3/8" FNPT P style couplers have 8 locking balls for better retention of plug. Has a maximu...

3/8" FNPT P style couplers have 8 locking balls for better retention of plug. Has a maximum of 300 PSI with a basic air flow of 3/8". Heavy duty st...

3/8" MNPT P style coupler bodies have 8 locking balls and a Buna-N Seal for better retention of plugs. P style couplers have a 3/8" basic flow size...

3/8" NPT P style hose barb couplers have a 3/8" basic flow size and a maximum of 300 PSI. Milton P style couplers with hose barbs are made of heavy...

Milton (625) (625) Milton 1807 3/8" MNPT P Style Plug 3/8" MNPT P style plugs are made of case hardened steel and are plated to resist rust. P styl...

3/8" NPT P style hose barb plugs have a 3/8" basic flow size and a maximum of 300 PSI. Milton P style couplers with hose barbs are made of case har...