Lippert Components (744)

Boot Axle Hangers 5.81" adjustable hanger. Boot Axle Hangers are a chassis component and are welded to the chassis to mount the axles and axle comp...

An axle hanger is a component that gets welded to the chassis in order to mount the axles and axle components. One hole axle hanger 2.448" W x 1.94...

3.25IN AXLE HANGERReplaces: Dexter 028-005-00 | Cross references are not a guarantee that the part will fit any specific application. Check all inf...

An axle hanger is a component that gets welded to the chassis in order to mount the axles and axle components. One hole axle hanger 2.448" W x 5.60...

One hole axle hanger 2.354" W x 4.75" L (4.17" to hole). Welding required. This is a replacement axle hanger for RV trailer suspension systems.Repl...

Standard use on 2,000 to 3,500 lbs. capacity axles. Replacement Round Spindle Washer for use in wheel end replacements. Replaces: Dexter 005-027-00...

Standard use on 1" spindles with a flat side, which are commonly found on 3,500 lbs. and under capacity axles. Replacement D- Flat Spindle Washer. ...

Standard use on 1" spindles with a flat side, which are commonly found on 3,500 lbs. and under capacity axles. Replacement Spindle Washer. For use ...

Hardware Type: AP Kit. Axle Type: Spring. Axle Count: Triple. Shackle Size: 3.13". Sprayer Included: No. This is a replacement, axle AP kit with eq...

Lippert AP suspension kits help you bolt the axle leaf springs to your hangers. Shackle Assembly Qty: 2. Shackle Assembly Length: 3.13". Shackle Pl...

Replacement wheel lug stud. Stud size: 1/2"-20 x 2". For 3,500-7,000-lb. brake hubs. For 2,000-3,500-lb. idler hubs. Need a replacement wheel lug s...

Inner Bearing Cone for 5, 200 to 8,000 lbs. Axle Hubs. Industry number: 25580. Pairs with inner bearing race. 5, 200 to 8,000 lbs. weight capacity ...

Fits axles with a 3" tube and capacity up to 4,400 lbs. U-bolt diameter of 1/2"-20 and overall length of 6-1/2". U-Bolts from Lippert™ are used wit...

Fits axles with a 2-3/8" tube and capacity up to 3,500 lbs. U-bolt diameter of 1/2"-20 and overall length of 5-1/8".Replaces: Dexter 011-021-00 | C...

Standard Cotter Pin for Lippert™ axle assemblies. For use on axles with a capacity up to 8,000 lbs. Overall length of 1.75". The standard Cotter Pi...

Fits 1/2"-20 lug studs. Common replacement for 2,200-lb. capacity. Replace a damaged or missing lug nut on your trailer wheel hubs with this Lipper...

Standard use in combination with 1/2" U-bolts, which are typically used to mount 2-3/8" axle tubes to the spring suspension system.Replaces: Dexter...

Standard use on almost all 1" spindles, which are commonly found on 3,500 to 8,000 lbs. capacity axles. Replacement Spindle Nut. For use in 3,500 l...

Standard use as a brake nut on 3,500 and 10,000 lbs. axle hubs with electric drum brakes which use a 4 or 7 bolt pattern on the mounting flange. Th...

Lippert Components highly suggests you replace the bearing race if you replace the bearing cone. Please consult your original equipment before purc...

Lippert Components highly suggests you replace the bearing race if you replace the bearing cone. Please consult your original equipment before purc...

Industry number: L68149. Pairs with inner bearing race. 3,500 lbs. weight capacity. Lippert strongly recommends replacing bearing cones and races t...

Get a genuine Lippert™ replacement part. This idler hub is designed for 3,500 lb. trailer idler axles, has a 5 on 4.5” bolt pattern, and is made fr...

Replacement shoulder bolt used for suspension hardware for axles. Shoulder length: 2.325". Overall length: 2.875". Thread size: 7/16-20. Body diame...

Standard use in combination with 7/16" U-bolts, which are typically used to mount 3" axle tubes to the spring suspension system.Replaces: Dexter 00...

Lippert Components Grease Zerk are an industry standard. Please consult your original equipment before purchasing. Be sure to inspect and maintain ...

This Lippert electric trailer brake assembly is a genuine replacement part for a wide variety of travel trailers, RVs and other trailer types. Elec...

Lippert Components Brake Hub Assemblies are the industry standard. Please consult your original equipment before purchasing. Be sure to inspect and...

BOLT - 1/2-13 X 1 5/8; G5 BP

STANDARD 2.25IN SHACKLE LINKReplaces: Dexter 018-011-01 | Cross references are not a guarantee that the part will fit any specific application. Che...

Industry number: 25520. Pairs with inner bearing cone. 5,200 to 8,000 lbs. weight capacity. Lippert strongly recommends replacing bearing cones and...

Lippert Components highly suggests you replace the bearing race if you replace the bearing cone. Please consult your original equipment before purc...

Industry number: L68111. Pairs with inner bearing cone. 3,500 lbs. weight capacity. Lippert strongly recommends replacing bearing cones and races t...

Weight Capacity: 1,750 lbs. Standens Leaf Spring Number: 72-42. Load Length: 26". Spring Layer Count: 4. Shock Compatible: No. Eye To Eye Length: 2...

This bearing is used as both the inner and outer race based on axle weight capacity Inner Race: Fits 2,000 lbs. Axle. HubOuter Race: Fits 2,000 to ...

This is a replacement, slipper leaf spring for RV trailer suspension systems. Weight Capacity: 2,500 lbs. Replacement 25" slipper leaf spring. 26.8...

Replacement, shackle link assembly for RV suspension. Includes: (2) shoulder bolts and (1) shackle link plate. Connects suspension springs and axle...

BRONZE BUSHING .58IN ID X .7000 X 1.74INReplaces: Dexter 014-077-00 | Cross references are not a guarantee that the part will fit any specific appl...

Replacement, heavy-duty shackle link for RV suspensionSize: 2.25"Connects suspension springs and axle hangersMeasured by width from center hole to ...

Replacement bolt to attach axle hanger to leaf spring. Integrated zerk for easy lubrication. Shoulder length: 2.825". Overall length: 3.74". Thread...

Replacement bolt to attach axle hanger to leaf spring. Integrated zerk for easy lubrication. Shoulder length: 2.325"Overall length: 2.883"Thread si...

Equalizer Assembly for Double Eye Springs. This EQ has an offset fork on one point, giving it a scalene shape. Shock Compatible: No. Equalizer Hori...

Equalizer Assembly for Double Eye Springs. This EQ has curved sides and is best suited for trailers with standard axle spacing. Shock Compatible: N...

Equalizer Assembly for Double Eye Springs. This EQ is 2" taller than the standard, providing 1" taller frame height. Shock Compatible: No. Equalize...

Lippert Components highly suggests you replace the bearing race if you replace the bearing cone. Please consult your original equipment before purc...

LCI Leaf Springs are the industry standard. Please consult your original equipment label before purchasing a new LCI Leaf Spring. 24” in Length 1, ...

Shield bearings, grease, and other inner hub components from dust and contaminants. Replacement dust caps for standard axle hubs are identified by ...

Replacement leaf spring for RV trailer. Length: 26". Weight Capacity: 2,200 lbs. Standens Leaf Spring Number: 72-78. Load Length: 26". Spring Layer...