Lisle (371)

3-Stone Hone Fits Cylinders 27/32" to 2" (21.4-50.8mm). Controlled pressure makes it possible to polish or hone with just one stone grit. Square en...

10050. Brake Cylinder Hone STONE SET. Stone Set for 10000. 240 grit, 1-1/8" long stones.

For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm). Special abrasive pads polish the cylinder without cutting. Controlled pressure, three a...

2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). Controlled pressure makes it possible to polish or hone with just one stone grit. Squ...

10550. SET REPLACEMENT STONES for 10500 Brake Cylinder Hone.

Injector Rail Fuel Line Cap Set, 5 pc.Caps Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics in 2003-2022 Cummins, 2001-2022 Duramax...

Fuel Rail Cap 2Cap Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics. (Ford 6.7L 2011-2022, Cummins 5.9L 2003-2009, Duramax 6.6L 200...

For Bleeding Air from Brake Cylinders with 7mm & 9mm Bleeder Screws. Double ended tools are offset for easy access to hard-toreach bleeder screws.

Double Ended Tool for Removing and Installing Brake Springs. Use plier tips to stretch brake spring. Handle ends remove and install spring over anc...

A Special Tool for a Special Job. Coil Spring cutters polish the battery contact while stainless steel brushes clean the cable terminals.

Tool is Designed for Slitting the Outer Sheath of Wire Loom Without Damaging Inner Wires. The sickle hook-shaped blade is made of high-quality stai...

Cuts Flexible Hose up to 1 1/4". The Hose Cutter will cleanly cut heater hoses, fuel lines, and other types of flexible hose up to 1 1/4". The stai...

11450. REPLACEMENT BLADE for a 11420 Hose Cutter.

Flare Nut Socket Set, 10 pc.The Socket Design Allow Access to Difficult Wired Temperature Sensors, Thermo Switches and Other Components. Works on A...

12050. SMALL MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

12060. LARGE MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

Line Socket Set, 5 pc. Designed to Replace Fuel Line Fittings Without Damage to Fitting, Fuel Rail, and Fuel Line Reducing the Possibility of Fuel ...

Removes and Installs Oxygen Sensors on Most Domestic and Some Imports. Special 7/8" socket with cutaway slot to provide clearance for wire harness....

Line Socket, 12mmThe Socket Design Allow Access to Difficult Wired Temperature Sensors, Thermo Switches and Other Components.

Cleans Threads in Soot Sensor Holes. Use with 7/8" hex socket or 3/8" square drive. Important: Use anti-seize.

12220. NOX SENSOR THREAD CHASER M20. Cleans Threads in NOx Sensor Holes. Use with 13/16" hex socket or 3/8" square drive to restore M20x1.5 NOx sen...

Cleans Threads in Oxygen Sensor Holes. Use with 3/4" hex socket or 3/8" square drive. Size: M18x1.5 Also works on M18x1.5 spark plug threads. IMPOR...

Designed for Easy Access on NOx and Soot Sensors. Includes 24mm & 30mm offset sockets with 1/2" drive. Each socket has 6 and 12 point options. ...

12320. LINE SOCKETS, 19MM & 22MM. Designed to Replace Fuel Line Fittings on Cummins ISB and ISX engines. The sockets reduce the possibility of ...

Use with a Breaker Bar to Loosen Stubborn Oxygen Sensors. Tool comes with both 1/2” and 3/8” drive. Attach a 1/2” breakerbar on the end of the tool...

For Servicing Disc Brakes. Three 3/8" square drive sockets with hex bits to remove and replace floating caliper mounting bolts. 3/8" and 8mm hex bi...

8mm Hex Socket 3/8" square drive socket with 8mm hex bit for GM brake caliper applications.

3/8" Brake Caliper Socket 3/8" square drive socket with 3/8" hex bit for GM brake caliper applications.

Makes it Easier to Insert Bearing Race. Insert bearing race quickly, straight in on FIRST TRY! Helps reduce damage to both race and axle housing. S...

This Master Set Contains 11 Drivers to Fit Automobiles and Trucks up to 1 Ton. Automobiles and Trucks up to 1 Ton. This set also includes 2 handles...

7PC FLIP SOCKET SET

DRIVER NO. 9

Makes it Easier to Insert Wheel Bearing Race and Seals Without Damage to Race and Axle Housing. This master set includes nine drivers to fit most c...

For Reinstalling the Manifold on Small Block Chevrolets. A simple way to expand a warped manifold so all bolt holes are accurately aligned. Helps p...

FLIP SOCKET SET 4PC

Quickly Disconnects Electrical Connectors Without Damage. Engage the tool tip behind the connector clip. Push or pull to disconnect. The tool is do...

The Socket Design Allow Access to Difficult Wired Temperature Sensors, Thermo Switches and Other Components. Works on ABS, master cylinder, coolant...

Fits 1" and 1 1/16" Switches Up To 1 5/8" Long. One socket with the correct length to fit 1" and 1 1/16" oil pressure switches (for vehicles equipp...

Fits 1 1/16" Switches Up To 2 5/8" Long, Found on Newer GM and Chrysler Vehicles. Fits 1 1/16" oil pressure sending unit (gauge type), found on mos...

13270. LOW PROFILE OIL FILTER SOCKET SET, 7PC. Contains 7 of the Most Popular Size Filter Canister Sockets to Work on Many Applications. Contains v...

13290 28MM LOW PROFILE FUEL FILTER SOCKET. Application: 2010-2018, 6.7L Dodge Cummins fuel filter cannister.

Set of 5 Low Profile Oil and Fuel Filter Canister Sockets in One Handy Case. Contains very low profile, 6 point 24mm, 27mm, 29mm, 32mmand 35/36mm s...

Low Profile Oil and Fuel Filter Canister Socket. Very low profile, 6 point socket for use on oil and fuel filter canisterswhen replacing the lement...

Low Profile Oil and Fuel Filter Canister Socket. Very low profile, 6 point socket for use on oil and fuel filter canisterswhen replacing the lement...

Removes and Installs DEF Canister Filters on Many Class 6-8 Trucks. 3/8" Drive. Not for use with an impact wrench.