OTC/Bosch (142)

14 mm Long Reach Hose Assembly for 5606 Compression Tester Kit.

1-TON, GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from quali...

1-TON, GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller. Remove and install parts for fast, effective repairs. The puller is forged from qualit...

Hex nut: 3/4"–16 (5PK)

2-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

2-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

7-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

7-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

7-TON GRIP-O-MATIC PULLER - Mechanical Grip-O-Matic Puller - Remove and install parts for fast, effective repairs. The puller is forged from qualit...

17-1/2 TON GRIP-O-MATIC PULLER. Mechanical Grip-O-Matic Puller. Remove and install parts for fast, effective repairs. The puller is forged from qua...

171/2-TON HYDRAULIC GRIP-O-MATIC PULLER (PULLER ONLY) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with...

30-TON HYDRAULIC GRIP-O-MATIC PULLER (PULLER ONLY) - Available in 10 to 50-ton capacities. Reliable single-acting Power Twin ram is matched with a ...

PUSH-PULLERS® LEGS - Extra Legs (pair) for No. 927 10-Ton Push-Puller - Leg Length 6-3/4" - (Reach equals leg length plus 1-1/2" with leg end caps.).

PULLER LEG SET (15-3/4IN LONG)

PULLER LEG SET (11-3/4IN LONG)

PUSH-PULLERS® LEGS. Extra Legs (pair) for No. 938 17-1/2 Ton Push-Puller and No. 1062 and 1063 17-1/2 Ton Capacity Hydrualic Pullers. Leg Length 30...

BEARING SPLITTER - Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extre...

BEARING PULLING ATTACHMENT - Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances...

BEARING SPLITTER - Features "knife-like" edges which are easily placed behind the part to secure a gripping surface, even when clearances are extre...

INTERNAL PULLING ATTACHMENT

BASIC SLIDE HAMMER UNIT - May be used with an OTC internal pulling attachment or with internal or external-internal threaded adapters. Slide hammer...

SLIDE HAMMER PULLER WITH CUP PULLING ATTACHMENT - This puller combines a basic slide hammer unit with a No. 1152 Internal Pulling Attachment. Ideal...

PILOT BEARING PULLER - Versatile puller built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobil...

PILOT BEARING PULLER. Versatile puller built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobile...

SILVER SLAPPER 8-WAY SLIDE HAMMER PULLER SET - Use for 2/3-way internal or external jobs. Pull flange-type rear axles, stubborn oil seals and beari...

MANUAL SLEEVE PULLER SET - Sleeve Puller/Installer Sets: These sets work on a wide array of truck, bus, and tractor engines, as well as those in ot...

Designed to work with set Nos. 1200, 1202, and 1203, these removal plates fit the full spectrum of cylinder sleeve sizes. Determine engine bore siz...

4-TON COLLISION REPAIR SET. Industry standard couplers are interchangeable with leading manufacturer's units. Single-speed hydraulic hand pump and ...

LIGHT TRUCK WHEEL STEP - Passenger and Light Truck Wheel Step - Provides quick, easy access to your vehicle's roof for loading/unloading cargo. Fit...

15427 Replacement Bearing. For 7455 Fuel Injector Nozzle Puller / Installer.

STINGER BRAKE DRUM DOLLY

OTC 16002 Caster, Swivel 4"

17-1/2 TON CAPACITY HYDRAULIC PULLER SET - Hydraulics: 4002 - Single stage hydraulic hand pump assembly, 4120A - 17-1/2 ton ram with threaded inser...

OTC Bosch 1699501320 BAT 120 Battery and Starter/Charger System Tester for use with Bosch ADS 325/ADS 625 Encore/Evolve Diagnostic Tools. The BAT 1...

Sp0F000013 Bosch Fuel

Sp0F000009 Bosch Metric

ENGINE SUPPORT BAR (3-POINT) 700 lb. capacity - cutting edge, design self-centers load to prevent tipping on inclined surfaces. smooth sliding legs...

PRESS V-BLOCKS (PAIR); Included in Set for part number 1882 (55-Ton Press Accessory S.

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

8-PT LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with 3...

6-PT LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with 3...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...