Asimeto Impact Hardness Tester

• Large screen (128x64 dot matrix LCD), allows for clear display of all functions and parameters
• Hardness test can be taken at any angle including inverted.
• A wide measuring range supports the hardness of all metallic materials. Hardness results are directly displayed in HRB, HHRC, HV, HB, HS, HL hardness scales.
• Large capacity memory storage of 500 sub groups. Stored information including single measured value, mean value, test data, impact direction, impact times, material and hardness scale are available.
• Upper and lower limit can be preset. An audio alarm will automatically sound when the reading is outside of the preset limits.
• Battery voltage information is displayed including the charge status.
• Calibration function is available.
• USB1.1 port allows for information to be uploaded directly to a PC.
• High speed thermal printer allows for the readings to be immediately printed.
• 6V Ni-MH rechargeable battery are supplied. The batteries can be charged with the integrated charger. Up to 150 hours of continuous operation battery life between charges. (eL off and no printing)
• Automatic power off after five minutes.

With
• Impact device
• Hardness test block
• Small support ring
• Cleaning brush
• Battery charger
• Paper for printing
• Manual
• DataPro software
• Communication cable

Specifications

Scale Type

Rockwell, VIckers, Brinell, Shore, Leeb

Minimum Hardness

19 HB; 17 HRC; 170 HLD

Maximum Hardness

651 HB; 68.5 HRC; 960 HLD

Display Type

LCD

Diameter of carbide ball

3mm.

Range

(170-860)HLD, (17-68.5)HRC, (19-651)HB

Accuracy

HLD: ±5, HRC: ±1, HB: ±4