Dustbane 52064 Orbit All Systems Floor Finish, 4L
Brand: Dustbane
MPN: 52064
SKU: 52064-S03-249
CA$55.77
Availability: Out of stock
Stock by location
1
Developed for use in high profile areas where the ultimate "wet look" gloss and durability are desired. Its high solid content builds the required film thickness with fewer coats.
- Preparation: Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.
- Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more.
- Maintenance: Dust and/or wet mop daily. Spray buff as needed. For best results, after damp mopping with a neutral floor detergent, apply Orbit diluted at 1:4, let dry for 30 minutes then burnish the floor. Burnishing daily is highly recommended but not imperative.
- Coverage: Coverage per 4 L is 149 m² (1600 ft²) to 232 m² (2500 ft²) depending upon porosity of the floor.
- Suitable for all resilient and non-resilient floors except for unsealed wood and cork.
Secure checkout:
