Forney 58602 Replacement Face Shield, Clear

15-1/2" (393.7 millimeters) by 8" (203.2 millimeters) replacement clear grinding shield. Meets ANSI Z87.1 safety standards. For Forney Industries Item No.'s 58600 and 58605 grinding shield assemblies. Product Specifications: Lightweight design for maximum comfort. Not to be used for oxy-acetylene welding. WARNING! NOT TO BE USED FOR OXY-ACETYLENE WELDING. Face Shields: Per CDC/NIOSH guidelines, disposable face shields for medical personnel made of light weight films that are relatively flat or fit loosely around the face should not be relied upon as optimal protection and are often used in conjunction with other personal protective equipment. WARNING!: According to current ANSI standards, face shields are considered secondary protection requiring the use of protective eyewear or goggles as well. Since the shield does not fully enclose the face, protective eyewear should also be worn to safeguard eyes. Face shield visors are NOT shatterproof. When large objects and/or objects traveling at high rates of speed strike face shields, the visor may break or become compromised and cause injury to the wearer’s face or eyes. Workers should avoid areas where such hazards exist or use extreme caution if they can’t be avoided entirely. Routinely check face shields for damage, and do not wear a face shield that has sustained damage. Workers performing tasks in which flying sparks or particles are present should wear protection to shield their face and head. Visors/face shields do not reflect IR. They are not recommended for use against radiant heat hazard including but not limited to welding applications.