Screws

Screw Size : No.8. Length : 1/2". Head Style : Phillips pan. Point Type : A/AB. Finish : Zinc

Screw Size : No.8. Length : 11/16". Head Style : Phillips Oval, SEMS. Point Type : A/AB. Head Size : No.6. Washer : Flush. Finish : Black Oxide

Screw Size : No.8. Length : 3/4". Head Style : Phillips Flat. Point Type : AB. Head Size : No.6. Finish : Black Oxide

Screw Size : No.8. Length : 1". Head Style : Phillips Oval. Point Type : A/AB. Head Size : Std. Finish : Black Oxide

Screw Size : No.8. Length : 1". Head Style : Phillips Flat Top Washer. Point Type : A/AB. Finish : Black E-Coat

PHILLIPS TRUSS HEAD TAP SCREW M5-2.12 X 15MM. Screw Size : M5-2.12 (No.12). Length : 15MM. Point Type : A/AB. Head Style : Phillips Truss. Head Dia...

PHILLIPS WSHR HD TEKS TAP SCREW No.8 X 3/4 PHOS. Screw Size : No.8. Length : 3/4". Point Type : No.2 Drill. Head Style : Phillips Round Washer. Was...

6.3-1.81 X 25MM HEX HD SEMS 17MM OD - PHOS. Screw Size : M6.3-1.81. Length : 25MM. Point Type : A/AB. Head Style : Hex, Sems. Washer Diameter : 17M...

Screw Size: M4.2-1.41, Length: 20MM, Point Type: A/AB, Head Style: Phillips Washer, Washer Head Diameter: 11MM, Finish: Black Oxide

No.14 X 1 IND HEX WA HD No.3 SUPER TEKS - ZINC. Screw Size : No.14. Length : 1". Head Style : Hex Washer. Point Type : No.3 Drill. Hex Size : 3/8"....

Screw Size: No.8, Length: 3/4", Head Style: Phillips Oval, SEMS, Point Type: A/AB, Head Size: No.6, Washer: Countersunk, Finish: Black Phosphate

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

No.8 X 1/2 PHILLIPS WASHER HD TEKS TAP SCREW - ZINC. Screw Size : No.8. Length : 1/2". Point Type : No.2 Drill. Head Style : Phillips Washer. Washe...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Rivets are used for attachment in many different areas. The critical dimensions are the diameter of the rivet body and the grip range or panel thic...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Body Bolts are usually either a hex washer head or hex head Sems® with the most common thread types being USS coarse or metric regular pitch. They ...

Washer Head is a screw/bolt with the washer permanently attached to it. Also called flanged head. The washer head eliminates the need for a separat...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Nylon Nuts are used with metal tapping screws throughout the car (interior & exterior) for attachment. As a tapping screw is installed, it cuts...

Rivets are used for attachment in many different areas. The critical dimensions are the diameter of the rivet body and the grip range or panel thic...

Spin Lock Nut is a hex flange nut with serrations under the flange for locking purposes. The serrations or grooves dig into the bearing surface dur...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Head Style- Phillips Oval Screw Size- No.8 Length- 1-1/4 in. Point Type- A/AB Finish- Black Oxide Head Size- No.6 Screw Type- TappingOE Numbers- 90...

U-Nuts are used the same as extruded U-nuts, on the edge of a panel, but do not posses the same “retention power” due to the lack of the extruded f...

Screw Size : No.8. Length : 1". Head Style : Phillips Oval. Point Type : A/AB. Head Size : No.6. Finish : Zinc

Screw Size : No.8. Length : 1-1/2". Head Style : Phillips Flat Top Washer. Point Type : A/AB. Finish : Black E-Coat

Screw Size : No.8. Length : 1/2". Point Type : No.2 Drill. Head Style : Phillips Washer. Washer Head Diameter : 7/16". Finish : Zinc. OEM Number : ...

Screw Size : No.8. Length : 3/4". Head Style : Phillips pan. Point Type : A/AB. Finish : Black Oxide

Nylon Nuts are used with metal tapping screws throughout the car (interior & exterior) for attachment. As a tapping screw is installed, it cuts...

6.3-1.81 X 20MM HEX WASH HD SEMS -BLK.PHOS. Screw Size : M6.3-1.81. Length : 20MM. Point Type : A/AB. Head Style : Hex Washer, Sems. Washer Diamete...

Thread Diameter : M12-1.75. Length : 40MM. Head Style : Hex Socket Cap. Thread Pitch : Regular. DIN : 912. Class : 12.9. Finish : Plain. Tensile St...

Head Style: Hex Socket Cap, Across Flats: 10, Thread Pitch: Regular, Tensile Strength: 177,000 PSI, Closed Length: 12.9, Drill Size: 912, Fits: Plain

Thread Diameter : M8-1.25. Length : 16MM. Head Style : Hex Socket Cap. Thread Pitch : Regular. DIN : 912. Class : 12.9. Finish : Plain. Tensile Str...

Head Style- Phillips Flat Screw Size- No.8 Length- 1 in. Point Type- AB Finish- Black Oxide Head Size- No.6 Screw Type- Tapping

Head Style- Phillips Flat Screw Size- No.8 Length- 1 in. Point Type- AB Finish- Black Oxide Head Size- No.6 Screw Type- Tapping

Thread Diameter : M12-1.75. Length : 30MM. Head Style : Hex Socket Cap. Thread Pitch : Regular. DIN : 912. Class : 12.9. Finish : Plain. Tensile St...

Thread Diameter : M10-1.5. Length : 50MM. Head Style : Hex Socket Cap. Thread Pitch : Regular. DIN : 912. Class : 12.9. Finish : Plain. Tensile Str...

Thread Diameter : M10-1.5. Length : 20MM. Head Style : Hex Socket Cap. Thread Pitch : Regular. DIN : 912. Class : 12.9. Finish : Plain. Tensile Str...

Tapping screws are generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grom...

Head Style- Phillips Oval Screw Size- No.8 Length- 1-1/4 in. Point Type- A/AB Finish- Black Oxide Head Size- No.6 Screw Type- TappingOE Numbers- 90...

Tapping Screw Generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grommets ...

Tapping Screw Generally used for retention of interior and exterior mouldings, trim, dash panels, etc. Can be used with nylon nuts, screw grommets ...