Brake Service Tools

6" Digital SAE/Metric Brake Rotor Gauge. 0 to 6". Manual Power On/Off. Metric/Inch System Interchange at Any Position. Zero Setting at Any Position...

5/16" x 3/8" Wrench for Bleeding Air From Brake Cylinders With Bleeder Screws. Double ended tools are offset for easy access. For 5/16" or 3/8" ble...

For Bleeding Air from Brake Cylinders with 8mm & 10mm Bleeder Screws. Double ended tools are offset for easy access to hard-toreach bleeder scr...

Includes sizes T-40, T-45, & T-50. All Torx® bits are made of heat-treated alloy steel. 27740 - 3 pc. set includes T-40, T-45, & T-50 sizes...

Allows Technicians to Compress the Emergency Brake Cable Spring with One Hand. Keeps one hand free for brake shoe arm or lever replacement.

10" Digital SAE/Metric Brake Drum Gauge. 3" to 16". Preset at 1-1/2" Depth with Indicators for 0.5" and 1". Manual Power On/Off. Metric/Inch System...

Drum Brake Adjusting Tool. Tool Adjusts Clearance Between Drum Brake and Brake Shoe. Fits Through a Slot in the Backing Plate and Turns the Star Wh...

Universal Brake Shoe Retaining Spring Tool. Double-Ended Tool Removes and Installs Small and Large Car Drum Brake Retaining Springs. Tool Fits Size...

Brake Lining Thickness Gauge. Colour Coded Brake Gauge Identifies Thickness Levels for Brake Lining Inspection. Metric - 8, 10, & 12mm (Green),...

Cleans Brake Caliper Mounting Surfaces. Removes brake dust, rust and other debris from brake caliper castings. Brush is made with heavy-duty steel ...

Disc Brake Piston Tool. Designed to Rotate the Parking-Brake-Activated Piston Back into the Caliper Cylinder When Replacing Worn Pads on Vehicles E...

12" Brake Spring Pliers. Tool Easily Removes and Installs Shoe Return Springs on Most Drum Brakes. Socket End Removes Spring From Anchor Stud and N...

The 6 piece set removes standard and metric bolts, nuts and studs from 1/4" to 9/16" (6mm to 14mm). Drive the proper size remover over the bolt hea...

11 Pc. Rear Brake Caliper Set. Designed for Vehicles With Brake Pistons That are Mechanically Tied to the Parking Brake and Require a Turning Actio...

Air Pump Brake Bleeder Tank. Diaphragm-type Bleeder for Conventional and Anti-Lock Brake Systems Allows for One-Man Operation. Diaphragm keeps Brak...

3/8" Brake Caliper Socket 3/8" square drive socket with 3/8" hex bit for GM brake caliper applications.

Features modern, ergonomic design for comfortable long-term use. Designed for engine performance diagnostics, brake bleeding, fluid transfer, evacu...

For Bleeding Air from Brake Cylinders with 7mm & 9mm Bleeder Screws. Double ended tools are offset for easy access to hard-toreach bleeder screws.

Brake Resetting Gauge. Used to Set the Proper Clearance Between Brake Lining and Drum Prior to Assembly. Inside Calipers Measure Drum Diameters and...

Disc Brake Lining Wear Gauge. Gauge Measures Brake Lining Remaining on Bonded Pads in Fractions From 1/16" to 5/8" in 1/32" Graduations. Tool Check...

15 Pc. Brake Service Set. Kit Works on both Disc and Drum Brake Systems. Use to Adjust Clearance Between Drum Brakes And Shoe, Remove and Install S...

Hose length 65 In. Quickly connects to Mityvac models MV7400, MV7300 or MV7201 fluid evacuators, converting them into one-person vacuum brake or hy...