Lisle

MPN: 45900 The three-piece, telescoping design allows the mechanic to hold the hood in the desired position The tool telescopes from 18 1/2" to 46 ...

MPN: 61850 The driver is designed to hold the seals to make installation easier Features five drivers and handle extension for extra reach for driv...

MPN: 13270 Contains very low profile sockets for use on oil and fuel filter canisters when replacing the element Use with 3/8" drive Specifications...

MPN: 89500 A tough brush that will last and last Bullet-shaped tip resists mushrooming Durable injection molded handle with ribbed design for firm ...

MPN: 54150 A dual-purpose puller Easily removes stuck battery terminals Tighten knurled cone to force jaws under the cable clamp Turn center screw ...

MPN: 38410 Low profile compact design allows easy access to hard-to reach DEF, breather line, coolant line, and fuel line connectors found on most ...

MPN: 35400 Place the tool under the edge of the door panel and insert into fastener as far as possible, then simply pry up Rugged tool with a large...

MPN: 15000 Micrometer head assures accuracy in feeding. Expands quickly to cylinder size with fast action rack and pinion Bottom guard plate helps ...

MPN: 38350 Separates exhaust hanger brackets from rubber supports The exhaust plier works on all import and domestic car and truck exhaust systems ...

MPN: 40100 Time saving tool that safely removes frozen hub assemblies without damaging other suspension components Fits on most 5, 6 and 8 lug hub ...

3-Stone Hone Fits Cylinders 27/32" to 2" (21.4-50.8mm). Controlled pressure makes it possible to polish or hone with just one stone grit. Square en...

10050. Brake Cylinder Hone STONE SET. Stone Set for 10000. 240 grit, 1-1/8" long stones.

For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm). Special abrasive pads polish the cylinder without cutting. Controlled pressure, three a...

2-Stone Hone Fits Cylinders 11/16" to 2 1/2" (17.4 - 63.5mm). Controlled pressure makes it possible to polish or hone with just one stone grit. Squ...

10550. SET REPLACEMENT STONES for 10500 Brake Cylinder Hone.

Injector Rail Fuel Line Cap Set, 5 pc.Caps Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics in 2003-2022 Cummins, 2001-2022 Duramax...

Fuel Rail Cap 2Cap Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics. (Ford 6.7L 2011-2022, Cummins 5.9L 2003-2009, Duramax 6.6L 200...

For Bleeding Air from Brake Cylinders with 7mm & 9mm Bleeder Screws. Double ended tools are offset for easy access to hard-toreach bleeder screws.

For Bleeding Air from Brake Cylinders with 8mm & 10mm Bleeder Screws. Double ended tools are offset for easy access to hard-toreach bleeder scr...

Lisle (371) (371) Cleans dirt and corrosion from battery terminals and cable clamps. The external Cleans dirt and corrosion from battery terminal...

Double Ended Tool for Removing and Installing Brake Springs. Use plier tips to stretch brake spring. Handle ends remove and install spring over anc...

A Special Tool for a Special Job. Coil Spring cutters polish the battery contact while stainless steel brushes clean the cable terminals.

Tool is Designed for Slitting the Outer Sheath of Wire Loom Without Damaging Inner Wires. The sickle hook-shaped blade is made of high-quality stai...

Cuts Flexible Hose up to 1 1/4". The Hose Cutter will cleanly cut heater hoses, fuel lines, and other types of flexible hose up to 1 1/4". The stai...

11450. REPLACEMENT BLADE for a 11420 Hose Cutter.

Flare Nut Socket Set, 10 pc.The Socket Design Allow Access to Difficult Wired Temperature Sensors, Thermo Switches and Other Components. Works on A...

12050. SMALL MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

12060. LARGE MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

Line Socket Set, 5 pc. Designed to Replace Fuel Line Fittings Without Damage to Fitting, Fuel Rail, and Fuel Line Reducing the Possibility of Fuel ...

Removes and Installs Oxygen Sensors on Most Domestic and Some Imports. Special 7/8" socket with cutaway slot to provide clearance for wire harness....

Line Socket, 12mmThe Socket Design Allow Access to Difficult Wired Temperature Sensors, Thermo Switches and Other Components.

Cleans Threads in Soot Sensor Holes. Use with 7/8" hex socket or 3/8" square drive. Important: Use anti-seize.

12220. NOX SENSOR THREAD CHASER M20. Cleans Threads in NOx Sensor Holes. Use with 13/16" hex socket or 3/8" square drive to restore M20x1.5 NOx sen...

Cleans Threads in Oxygen Sensor Holes. Use with 3/4" hex socket or 3/8" square drive. Size: M18x1.5 Also works on M18x1.5 spark plug threads. IMPOR...

Designed for Easy Access on NOx and Soot Sensors. Includes 24mm & 30mm offset sockets with 1/2" drive. Each socket has 6 and 12 point options. ...

12320. LINE SOCKETS, 19MM & 22MM. Designed to Replace Fuel Line Fittings on Cummins ISB and ISX engines. The sockets reduce the possibility of ...

Use with a Breaker Bar to Loosen Stubborn Oxygen Sensors. Tool comes with both 1/2” and 3/8” drive. Attach a 1/2” breakerbar on the end of the tool...

3/8" Brake Caliper Socket 3/8" square drive socket with 3/8" hex bit for GM brake caliper applications.

Makes it Easier to Insert Bearing Race. Insert bearing race quickly, straight in on FIRST TRY! Helps reduce damage to both race and axle housing. S...

This Master Set Contains 11 Drivers to Fit Automobiles and Trucks up to 1 Ton. Automobiles and Trucks up to 1 Ton. This set also includes 2 handles...