Specialty Service Tools

Includes components necessary to perform routine maintenance on Mityvac Pump model MV8510. Other service parts are available and indicated in the p...

MV5530 Compression Test Kit. This comprehensive kit includes everything required to perform dry and wet engine cylinder compression tests. Commonly...

This Master Set Contains 11 Drivers to Fit Automobiles and Trucks up to 1 Ton. Automobiles and Trucks up to 1 Ton. This set also includes 2 handles...

This Master Set Contains 11 Drivers to Fit Automobiles and Trucks up to 1 Ton. Automobiles and Trucks up to 1 Ton. This set also includes 2 handles...

Injector Rail Fuel Line Cap Set, 5 pc.Caps Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics in 2003-2022 Cummins, 2001-2022 Duramax...

JIMMY BAR forged from chrome alloy steel and heat treated to resist bending and breaking - 7/8" round, 30" long.

Makes it easier to insert wheel bearing race and seals without damage to race and axle housing. This master set includes nine drivers to fit most c...

Cleans Threads in Oxygen Sensor Holes. Use with 3/4" hex socket or 3/8" square drive. Size: M18x1.5 Also works on M18x1.5 spark plug threads. IMPOR...

Removes and Installs Oxygen Sensors on Most Domestic and Some Imports. Special 7/8" socket with cutaway slot to provide clearance for wire harness....

FLUID EVACUATION / BRAKE BLEEDING TOOL - Use to bleed brake systems and remove a variety of fluid from vehicles, such as antifreeze, oil, transmiss...

ADJ. HOOK SPANNER WRENCH

3 PIECE INDEXING PRY BAR SET - Sizes 10", 12" and 15". Indexible to 180° for better access. 14 locking positions for leverage in multiple applicati...

Jimmy Bar forged from chrome alloy steel and heat treated to resist bending and breaking - 3/4" round, 24" long.

ANTI-STATIC WRIST STRAP. Virtually eliminates the possibility of static electricity causing damage while working on electronic components. One-size...

OIL SEAL PICK

4 PIECE ROLLING HEAD PRYBAR KIT - Here's a set of tools anyone working in the trades will appreciate owning: The 7176, 4 Pc Rolling Head Pry Bar se...

The OTC 7166 jimmy bar is forged from chrome alloy steel. and then heat treated to resist bending and breaking. 5/8 diameter and 18 long.

ROLLING HEAD PRY BAR 18" LONG - You'll have a lot of leverage using one of these rolling head pry bars. The long, tapered body will also serve as a...

O-RING / OIL SEAL PICK - For removing stubborn o-ring or oil seal out of its seat.

BALL HONE, 7/8 INCH - 7/8”, 22mm Ball Hone - Ball Hones can be used for refinishing and resizing bores such as found in brake calipers, engine lift...

BALL HONE, 3/8 INCH - 3/8”, 10mm Ball Hone - Ball Hones can be used for refinishing and resizing bores such as found in brake calipers, engine lift...

The 6975 Vacuum/Pressure System Tester can immediately diagnose leaks in pressure or vacuum systems. The patented design includes an intuitive rota...

BALL JOINT SEPARATOR. This press separates the lower control arm ball joint from the steering knuckle. Similar to 204-592. Works on many Ford, Linc...

HEAVY-DUTY GEAR PULLER. The OTC 6614 Heavy Duty Gear Puller will remove gears up to 7-1/4" in diameter, including most cam gears. Rated at 8 tons, ...

3-Stone Hone Fits Cylinders 27/32" to 2" (21.4-50.8mm). Controlled pressure makes it possible to polish or hone with just one stone grit. Square en...

MINI PICK & HOOK SET - 4 PIECE - Sturdy stainless steel points and shafts designed for marking, removing o-rings, accessing snap rings, and per...

SERPENTINE BELT TOOL. Fits tensioner pulleys with 13mm-16mm, 18mm hex or 3/8" and 1/2" square drives. For hard to access tensioners, there are 13mm...

FLEXIBLE HOSE CLAMP PLIERS - Allows technician to access the flat-type hose clamps located in hard-to-reach areas. Pliers has locking mechanism to ...

MASTER BUSHING DRIVE SET (33 PIECE METRIC & STANDARD) - Enables you to remove and install bushings ranging from 10mm to 42mm in diameter and 3/...

REAR CUP BEARING REPLACER

OTC Bosch 1699501320 BAT 120 Battery and Starter/Charger System Tester for use with Bosch ADS 325/ADS 625 Encore/Evolve Diagnostic Tools. The BAT 1...

For Reinstalling the Manifold on Small Block Chevrolets. A simple way to expand a warped manifold so all bolt holes are accurately aligned. Helps p...

Lisle 12340 Line Socket, 22mm Lisle 12340 Line Socket, 22mm Lisle 12340 Line Socket, 22mm

12050. SMALL MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

Use with a Breaker Bar to Loosen Stubborn Oxygen Sensors. Tool comes with both 1/2” and 3/8” drive. Attach a 1/2” breakerbar on the end of the tool...

Lisle 12320 Line Sockets, 19mm & 22mm Lisle 12320 Line Sockets, 19mm & 22mm Lisle 12320 Line Sockets, 19mm & 22mm

Designed for Easy Access on NOx and Soot Sensors. Includes 24mm & 30mm offset sockets with 1/2" drive. Each socket has 6 and 12 point options. ...

12220. NOX SENSOR THREAD CHASER M20. Cleans Threads in NOx Sensor Holes. Use with 13/16" hex socket or 3/8" square drive to restore M20x1.5 NOx sen...

12060. LARGE MASTER CHUCK KEY. Has 4 sizes. Strong neodymium magnets for attachment close to the worksite or toolbox. Cast from alloy steel for str...

Cleans dirt and corrosion from battery terminals and cable clamps. The external brush cleans cable clamps and internal brush cleans terminal posts....

11450. REPLACEMENT BLADE for a 11420 Hose Cutter.

Cuts Flexible Hose up to 1 1/4". The Hose Cutter will cleanly cut heater hoses, fuel lines, and other types of flexible hose up to 1 1/4". The stai...

Fuel Rail Cap 2Cap Used to Block Off the Fuel Rail During Fuel Pressure Diagnostics. (Ford 6.7L 2011-2022, Cummins 5.9L 2003-2009, Duramax 6.6L 200...

10550. SET REPLACEMENT STONES for 10500 Brake Cylinder Hone.

For 1 1/2" to 3 1/8" Disc Brake Cylinders (38.1 to 79.3mm). Special abrasive pads polish the cylinder without cutting. Controlled pressure, three a...

10050. Brake Cylinder Hone STONE SET. Stone Set for 10000. 240 grit, 1-1/8" long stones.

The Robinair 34998 Connected R-134a ACS Machine recovers, recycles, evacuates, leak-tests and recharges R-134a with improved 98.5% efficiency – unm...