Specialty Tools

For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads. Includes 5 adapters (available individually) for use in both 2 and 4-...

Allows more time running your machines with less down time. The Radiator Genie Pro is so versatile, it can be used on a variety of machines that op...

Set of 5 Low Profile Oil and Fuel Filter Canister Sockets in One Handy Case. Contains very low profile, 6 point 24mm, 27mm, 29mm, 32mmand 35/36mm s...

12 Pc. 90-Tooth 12 Point Flex Head Ratcheting Combination Metric Wrench Set. 90-tooth ratcheting box end delivers a 4° swing arc to turn a fastener...

PADS-REMOVER (10PK FOR 8342)

Used to Replace the Spindle Snap Rings Found on 2007 and Newer Ford Super Duty Pickups. Rigid plier design with narrow tips to fit into the 2-1/2” ...

Depresses and Holds Clutch Pedals and Brake Pedals. The two-piece, telescoping tool extends to the pedal and locks in position. Brace the formed pl...

For Chrysler, GM, Mitsubishi and Dodge. Updated, Supersedes 49500. Low profile design works in confined spaces eliminating the need to remove the r...

BUDD WHEEL SOCKET - 1" 33mm hex.

The OTC 5911A magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping and avoid getting burned with hot o...

RONT HUB INSTALLER AND PULLER - Front hub puller for servicing front-wheel drive cars. Includes a spare locknut, which permits use with a No. 1177 ...

Weller TC205 Solder Tip Cleaning Sponge with slits. A replacement for iron stands, this solder tip cleaning sponge with slits fits for these PH50, ...

Includes components necessary to perform routine maintenance on Mityvac Pump model MV8510. Other service parts are available and indicated in the p...

100 Amp Analogue Load Tester

Razor Blade Scraper - Stubby Pocket Style (30 PC)

Go / No Go style gauges for quick measurements. 2 step grinding in .002" increments allows quick measurements of very specific ranges. Stainless st...

Water and Air Cleaning In One Wand for High Efficiency Cooling Systems on Large Industrial Equipment.50 inch XL wand for hard to reach places. Pate...

SET WR RAT FLEX COMB 12PT

WR FLEX COMB RAT 90T

GEARWRENCH 90-tooth reversible ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improv...

GEARWRENCH 90-tooth reversible ratcheting wrench swing arc of just 4° turns fasteners in extremely tight spaces. Longer, wider beam delivers improv...

1/2" Drive Bolt Biter™ Impact Deep Extraction Socket 25mm- [1-"]. Bi-directional design for removing or tightening damaged fasteners. Tapered entry...

Trim Pad Removing Tool Curved Shank. Used to remove trim pad without damage. Designed for various types of clips. Works on various types of plastic...

3-1/8" Mini Full Hook. 6.5" overall length for reach. Use for hooking springs and other objects. Small size for tight access areas. Blades are secu...

4" Hose Puller Pick. 8" overall length for reach. Use for removing springs clamps or other prying. Blades are securely fixed in the handle so they ...

Mechanic's Stethoscope. Stethoscope Locates the Source of Engine Noise Quickly. Listen for Trouble By Tracing the Sound of Flowing Water, Oil, Gas ...

10mm x 12mm Flare Nut Wrench. Size Stamped on Both Sides and Head. 15° Offset Heads. Full Polish Chrome. .

3/8" Drive 90-Tooth Locking Flex Head Teardrop Ratchet 11". 90-tooth gear delivers a 4° swing arc to turn a fastener in tight confines. Teardrop, l...

3/8" Drive 90-Tooth Non-Quick Release Ratchet Repair Kit. For non-quick release and non-roto ratchets.

TP55 TORX PLUS BIT

TP50 TORX PLUS BIT – Replacement Bit for Kit. Nine of the Most Popular Torx Plus® Sizes for Automotive Applications. Some common Torx Plus® applica...

No.3 x 5" Square Dual Material Screwdriver. Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency. “Speed...

No.1 x 4" Square Dual Material Screwdriver. Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency. “Speed...

6 Pc. Torx® Mini Dual Material Screwdriver Set. Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency. “S...

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt. Can be us...

Detects Combustion Leaks on Diesel Engines. Use the diesel leak detector fluid with the Lisle 75500 Combustion Leak Detector. Indicating fluid chan...

LOCKNUT SOCKET - Services 1985-1/2-95 Ford F-series H.D. 3/4- and 1-ton Dana 50 IFS of Dana 60 front axle; 1982-90 GM H.D. 3/4- and 1-ton trucks, 1...

MANIFOLD DRILL TEMPLATE FOR GM 4.8L, 5.3L & 6.0LRemoves Broken Exhaust Manifold Bolts on GM LS III 4.8L, 5.3L and 6.0L Motors Without Damaging ...

BRAKE DRUM AND ROTOR PULLER - Handles large components such as brake drums, rotors, drive wheels, gears, flywheels, and pulleys - One person can ea...

Cuts and Strips Insulation from 14 to 24 Gauge Wires. Crimps 14 to 24 gauge insulated and non-insulated terminals. The pliers end grabs wire for tw...

INJECTOR SEAL INSTALLER AND SIZER ADAPTERS. Ensure replacement injectors and seals are installed correctly. This kit installs the dual seals onto t...