Tools > Lubrication Systems

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2103, Type: Straight, Thread: M8 x 1, Overall Length (mm): 15.7, Quanti...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1710, Thread: 3/8" - 24 Unified National Fine, Overall Length: 9/16" (1...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1688, Thread: 1/8" National Pipe Thread, Overall Length: 7/8" (22.6mm),...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1610, Thread: 1/8" National Pipe Thread, Overall Length: 21/32" (17.52m...

Specially designed for the fast transfer of lubricants, solvents, agricultural and industrial chemicals, additives and other non-corrosive liquids ...

Robust design for easy draining and filling. Capacity: 17 oz. (500 cc). Complete with 12” vinyl hose for transmission and differential service. Pow...

Wet Seal Kit, Includes Motor Shaft Seal and O-Rings for Strainer Coverplate, Gear Coverplate and Bypass Poppet.

Aluminum die cast pump head for strength and durability. Knurled barrel for a non-slip grip. Convenient one hand operation. Uses standard 14 oz. gr...

The lever action design of our heavy duty grease guns facilitate accurate control of grease flow. Fitted with a 6” steel curved extension pipe and ...

Universal joints, tough to reach areas, 1/8” threads. For dispensing a fine line of grease. 1 pc. in clamshell package. Overall Length of 1-1/2".Ne...

4” long. For hard-to-reach grease points. Supplied with locking sleeve to fit all grease couplers. In clamshell package. Overall Length of 7-1/4".N...

Universal joints, tough to reach areas, 1/8” threads. 1-1/2” Needle Nose Dispenser. 1 pc. in clamshell package. Overall Length of 2-3/4".Needle Nos...

Selectline Vacuum Pump MV8257. Despite their seemingly simple design, Mityvac hand pumps offer a long list of unique features, many of them patent ...

The MV7102 dispenses and extracts a wide range of automotive fluids including brake, washer, power steering and transmission fluid, engine oil, gea...

GPI 110277-505, M-150S Switch Assembly (Switch, Breaker, Bracket).The GPI M-150S Switch Assembly (110277-505) is easy to install as a replacement s...

GPI Power Cord Assembly with Strain Relief Connector Easy to install dome nut strain relief connector with NPT threads. Prevents kinking, twisting ...

GPI 1-inch NPT, Adjustable Composite Suction Pipe GPI 1-inch NPT, Adjustable Composite Suction Pipe GPI 1-inch NPT, Adjustable Composite Suction Pipe

Pocket sized pry bars with multiple uses around the shop, farm, or garage. Crafted from durable 3/16” (4.75 MM) diameter hardened steel, each 5” (1...

The LockNLube Pressure Return Valve allows grease to flow from the hose back to the barrel with just the twist of a knob. No more pressure locks an...

The easiest way to build high pressure in a pistol grip! Easy one-hand toggle to switch from High Volume to High Pressure. The Patented 2-Piston me...

The LNL351 Professional Series Lever Grease Gun is the result of years of work based on feedback from our customers. We designed this gun to work b...

LNL231-F Fine Threads (7/16”–28) Compatible with Dewalt® and Lincoln®. The new LockNLube In-Line Hose Swivel is built to withstand up to 10,000 PSI...

LNL231-C Coarse Threads (7/16-20) Compatible with Milwaukee®, Ryobi®, Ridgid® and Alemite®. The new LockNLube In-Line Hose Swivel is built to withs...

Quick Connect Greasing Accessory Kit. Reach any grease fitting on any machine! Eight quick-connect adapters allow access to hard-to-reach grease fi...

The LNL153 is a heavy-duty grease gun that gets the job done! We include a high-quality 20" hose, in-Line Hose Swivel, and LockNLube® Grease Couple...

High quality grease fitting and coupler make the Simple 90° adapter perfect for your LockNLube® Grease Coupler. Use in confined spaces where grease...

Easily install and extract grease fittings. Fits 1/4"-28, M6x1, M8x1 and other fittings with hex size 5/16" (7mm) and 3/8" (9mm).Easily install and...

Extra reach for hard-to-reach grease fittings. Snaps directly onto a jaw-type coupler to reach grease fittings in very tight spaces. Delivers a fin...

ATF REFILL ADAPTER KIT

The MV7120 dispenses and extracts a wide range of automotive fluids including brake, washer, power steering and transmission fluid, engine oil, gea...

The MV7105 dispenses and extracts a wide range of automotive fluids including brake, washer, power steering and transmission fluid, engine oil, gea...

GREASE-WHIP 36 IN

3/16" X 18" GREASE WHIP HOSE ASSEMBLY. Smooth, black, oil and heat resistant nitrile rubber. One braid of high-tensile steel wire. Smooth, black, o...

End greasing frustration with the original locking grease coupler! Locks on, stays on, won't leak. Rated up to 10,000 PSI. Easily disconnects, even...

Easily replace the seal and steel jaws on your LockNLube® Grease Coupler. Each Rebuild Kit includes four hardened steel jaws and a threaded cone ho...

Easily replace the seal and steel jaws on your LockNLube® Grease Coupler. Each Rebuild Kit includes four hardened steel jaws and a threaded cone ho...

End greasing frustration with the original locking grease coupler! Locks on, stays on, won't leak. Rated up to 10,000 PSI. Easily disconnects, even...

End greasing frustration with the original locking grease coupler! Locks on, stays on, won't leak. Rated up to 10,000 PSI. Easily disconnects, even...

Open up clogged grease fittings with the Grease Buster®. Simply fill with a solvent and tap the piston with a hammer. The updated design includes a...

Grease Gun Filler Nipple. Used to bulk fill grease guns. 1⁄8" NPT(m) fitting.

For tap repair of 1/4 In.-28 damaged threads. For removal of 3/8 In. and 5/16 In. Hex, straight or angle fittings. For retapping holes for new fitt...

Knurled body and mill flats for easy use, installation and removal. 1/8 In. NPT. For use with most hand-operated grease guns. 4-jaw design. Working...

18 In. Length. Both ends have 1/8 In. NPT (m) thread. Burst pressure - 14,000 PSI. Working Pressure - 3,500 PSI.

12 In. Length. Both ends have 1/8 In. NPT (m) thread. Burst pressure - 14,000 PSI. Working Pressure - 3,500 PSI. HEX - 1/2 In. 12 In. Length Both e...

Perfect for draining and filling differentials, clutches, power steering reservoirs and transmissions. Needs no priming. Features heavy-duty steel ...

Adapter Features Grease gun or hose adapter and High-quality Machined Brass.

The LNL252 delivers up to 8,000 PSI. A cast aluminum head combines extreme durability and light weight construction. A large ergonomic handle means...