Specialty Hand Tools

GM HEATER LINE QUICK-CONNECT RELEASE TOOL Specially designed for separating quick-connect fittings on heater lines of 1999-2004 Chevy and GMC C/K t...

ROLLING HEAD PRY BAR 18" LONG - You'll have a lot of leverage using one of these rolling head pry bars. The long, tapered body will also serve as a...

ROLLING HEAD PRY BAR 6" LONG - You'll have a lot of leverage using one of these rolling head pry bars. The long, tapered body will also serve as an...

ROLLING HEAD PRY BAR 16" LONG - You'll have a lot of leverage using one of these rolling head pry bars. The long, tapered body will also serve as a...

COOLING SYSTEM POWER FLUSH GUN - Perfectly suited for quick and efficient cooling system flushing. Simply attach it to radiator or heater hoses and...

FLEXIBLE HOSE CLAMP PLIERS - Allows technician to access the flat-type hose clamps located in hard-to-reach areas. Pliers has locking mechanism to ...

STRAIGHT-BLADE HOSE CUTTER. Cuts rubber hoses ranging from 1/4" to 1-1/2". Simply place hose in tool and squeeze handle to cut. Replacement steel c...

JIMMY BAR - 5/8" round, 18" long.

JIMMY BAR forged from chrome alloy steel and heat treated to resist bending and breaking - 7/8" round, 30" long.

5-PIECE MORTORQ SUPER BIT SOCKET SET MORTORQ® Super specialty fasteners are found on Honda, Nissan, GM, Chrysler, Jeep and Dodge vehicles. The uniq...

CHAIN WRENCH

SMALL UNIVERSAL GLAND WRENCH - This wrench is fully adjustable to fit hydraulic cylinders on vehicles having gland nuts from 1" to 3-3/4" in diamet...

METRIC DIE SET FOR NO. 7402 Metric die set for No. 7402 - Includes three dies: 1 mm-1.25 mm-1.5 mm-1.75 mm, 2 mm-2.5 mm-3.0 mm-3.5 mm; 4 mm pitch d...

UNIVERSAL C-FRAME NUT SPLITTER - Forged and heat-treated frame with offset handle works where ordinary nut splitters may fail. Smooth action cracks...

Designed for use on front wheel adjusting nuts found on Toyota FJ, LN, and RN models.

LOCKNUT SOCKET - Services 1985-newer Ford F-series 3/4- and 1-ton trucks with Dana 80 rear axle. 1/2" sq. drive.

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

LUG NUT CAP REMOVER - Chrome-plated lug nut caps found on many heavy-duty trucks and trailers can be tough to remove, and they're easily damaged if...

BUDD WHEEL SOCKET - 1" 33mm hex.

BRAKE PAD GAUGE - SPEED UP your inspection process. The 6596 Brake Pad Gauge allows for a definitive measurement of brake pads to determine remaini...

CALIPER HANGER SET - These hangers are designed to hold brake calipers out of your way during brake, bearing, suspension, or axle work. In doing so...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

The OTC 5911A magnetically attaches to pre-loosened oil pan drain plugs so you can remove them without dropping and avoid getting burned with hot o...

LOCKNUT SOCKET - Services 1993-newer Ford Ranger Bronco II and Explorer with manual hubs; 1995-96 Ford F-series 1/2-ton truck and full-size Bronco ...

BUSHING DRIVER SET - Enables you to remove and install bushings ranging from 3/8" to 1-3/8" in diameter, as used in cars, trucks, tractors, constru...

BEARING RACE & SEAL DRIVER SET - Permits installation of tapered bearing races and seals without damage to the component or housing. Includes a...

BALL JOINT SPANNER WRENCH - Designed for removal and installation of ball joint adjusting sleeves on 1/2-, 3/4-, and 1-ton Dana 44 open yoke front ...

RONT HUB INSTALLER AND PULLER - Front hub puller for servicing front-wheel drive cars. Includes a spare locknut, which permits use with a No. 1177 ...

TUBULAR SPANNER WRENCH. Six-lug, spanner-type wrench remove and install rear wheel bearing locknuts. They're built for use with a 3/4" square-drive...

BUDD WHEEL SOCKET - 1" 1-1/2" hex.

FORD REAR AXLE NUT WRENCH. Applications: 2003-newer Ford F-250, F-350, and F-450 Super-Duty trucks with 10-1/2 inch rear axle.4-lug socket. Same as...

LOCKNUT SOCKET - Services 1985-1/2-95 Ford F-series H.D. 3/4- and 1-ton Dana 50 IFS of Dana 60 front axle; 1982-90 GM H.D. 3/4- and 1-ton trucks, 1...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

8-PT LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with 3...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

8-PT LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with 3...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

6-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...

8-PT LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with 3...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel - NOTE: Sockets are designed for use with ...

8-PT. LOCKNUT SOCKET - This high-grade truck wheel bearing locknut socket is made of high-strength steel. NOTE: Sockets are designed for use with 3...