Specialty Hand Tools

T55 with a 3/8 inch square drive. Made with two piece construction S2 grade steel, one of the highest quality tool grade steels used in production,...

3 PC DUAL EDGE EXTRACTOR SET 3/16IN - 1/2IN

DISC BRAKE PAD SPREADER - Disc brake pad installation is much easier when you're using this spreader, which fits between the new pads and expands t...

12 INCH CHAIN WRENCH - Works on many different-shaped objects, such as square, round, hexagon, oval, etc. Handle is 12" long; chain grips objects r...

WHEEL BEARING LOCKNUT SOCKETS / BOARD. Popular sizes in 6- or 8-point. Locknut sockets are required for reinstallation of the locknut to ensure the...

The BAT 155 tests 6V, 12V batteries from 100-6,000 Cold Cranking Amp (CCA) test capacity, including AGM, Gel Cell, flooded lead-acid, Start/Stop EF...

J-24428-A AXLE SHAFT SEAL INSTALLER.

120MM TRUCK WHL BEARING LOCKNU

BALL HONE, 7/8 INCH - 7/8”, 22mm Ball Hone - Ball Hones can be used for refinishing and resizing bores such as found in brake calipers, engine lift...

Scan Tool Cable / Diagnostic DB 25 Adapter Cable.

OTC Bosch 1699501320 BAT 120 Battery and Starter/Charger System Tester for use with Bosch ADS 325/ADS 625 Encore/Evolve Diagnostic Tools. The BAT 1...

LOCKNUT SOCKET - Services 1988-1995 Isuzu Trooper, Rodeo, Amigo, and pickup; 1989-1995 Honda Passport; Jeep J20 pickups with Dana 60 axle. 1/2" sq....

PUNCH & CHISEL SET - Durable set of heat-treated chrome vanadium steel punches and chisels. Storage tray included.

BALL HONE, 5/8 INCH - 5/8”, 16mm Ball Hone - Ball Hones can be used for refinishing and resizing bores such as found in brake calipers, engine lift...

2-5/8" (6 PT.) TRUCK PINION LOCKNUT SOCKET. Socket has 3" of useable depth, 4" overall length. Eliminates modifying standard socket to provide nece...

BRAKE TOOL SET (8 PIECE). Set contains the most popular brake tools for servicing drum brakes on many import and domestic vehicles. Features BMC an...

Provides leverage to remove and install stubborn hold-down springs of drum brakes on cars and light trucks. Special beveled cup end and notched des...

RATCHETING HOSE & PVC CUTTER (STANDARD) - Cuts hose and PVC up to 1-3/8" dia. Features metal frame and ergonomic handles for high leverage. Com...

T27 TAMPER-RESISTANT TORX 1/4

AXLE STUD CONE PLIER - Specially designed pliers gives you the leverage needed to expand the cone and remove it from the stud for axle removal.

DISC BRAKE CALIPER TOOL KIT - This tool set is a must when you're installing brake pads on vehicles with 4-wheel disc brakes. It works on most GM v...

HOSE REMOVAL SET (6-PIECE). Consisting of six (6) hose removal tools which consists of three (3) 10", soft-handled tools and three (3) 15", soft-ha...

6 PC 4WD SPINDLE NUT SOCKET SE

WHEEL CAP SERVICE TOOL

WIRE CONNECTOR TOOL SET, 2 PIECE - Designed to remove terminals from connector housing without damage to the terminal or connector. Set provides 12...

OTC 1947A 41mm Budd Wheel Socket. 41 millimeter hex socket with 21 millimeter square. Works on import truck Budd wheels. Extra deep design lets you...

Services 1994 and newer Dodge 1/2-ton 4x4 pickups with Dana 44 front axle and Dana 60 axle with vacuum disconnect. Especially designed to accommoda...

METRIC TRUCK WHEEL BEARING LOCKNUT SOCKET - Specially designed socket easily removes or installs locknuts. Made of high strength steel and resist r...

OIL SEAL PICK

90° Replacement tips for pliers Nos. 7300 and 7301.

FLUID EVACUATION / BRAKE BLEEDING TOOL - Use to bleed brake systems and remove a variety of fluid from vehicles, such as antifreeze, oil, transmiss...

J-35616-34 - 160/180 Female Proble Adapter Yellow.

DODGE HUB SERVICE SET - Dodge Hub Service Set (p/n 6576S) Removes stubborn hubs when nothing else will, using 2 methods: First, the 6576 Hub Pressi...

BALL HONE, 3/8 INCH - 3/8”, 10mm Ball Hone - Ball Hones can be used for refinishing and resizing bores such as found in brake calipers, engine lift...

TAMPER-RESISTANT TORX® PLUS SOCKET SET (11 PIECE) INCLUDES: 5905-8 - 8IPR - 1/4", 5905-10 - 10IPR - 1/4", 5905-15 - 15IPR - 1/4", 5905-20 - 20IPR -...

Ball Joint Installer Adapter 204-355/1

LOCKNUT SOCKET - Services 1978-84 Ford F-series H.D. 3/4-and 1-ton 4WD trucks; 1973-81 GM 3/4- and 1-ton 4WD trucks. 1/2" sq. drive.

The 6975 Vacuum/Pressure System Tester can immediately diagnose leaks in pressure or vacuum systems. The patented design includes an intuitive rota...

54MM TRUCK WHL BEARING LOCKNUT

ONE-MAN BRAKE BLEEDER HOSE. Removes air from brake system one wheel at a time and eliminates the need for an assistant to help do the job. Hose eas...

BUDD WHEEL SOCKET SET (5 PIECE) - One each of the sockets listed below comes in a convenient storage box. The metric sizes work on the import truck...

Small-size pliers for work in tight areas. Service S-ring and R-ring clips, internal or external, straight or angled. Ruggedly built of heat-treate...

REAR CUP BEARING REPLACER

WHEEL STUD SERVICE KIT - Works on most hubs for installation and removal - All sizes of studs. Installation done by pushing on the head, eliminatin...