Tools > Specialty Hand Tools

49750. AIR HOSE HOLDER, GREEN. Strong Magnet Attaches to Ferrous Metal Surfaces to Keep Most 3/8" to 1/2" Shop Air Hoses off the Floor, Clean and A...

Removes the pivot pin on GM, Ford and Chrysler tilt and telescoping Saginaw steering columns.

Removes and installs the wire harness on glow plug connectors on Ford 6.0L and other Diesel engines. Helps prevent damage to the harness and connec...

42810. PLASTIC CLIP REMOVAL PLIERS. For Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins. Needle nose pliers design fits into...

Use with Lisle 15000. These special stones are designed for honing Nikasil plated cylinders found on some ATVs, motorcycles, snowmobiles, waverunne...

Used to plug the oil filter when changing oil on 2013-2017 Dodge Ram Cummins 2500/3500 Heavy-Duty trucks. Threads into the filter for a secure seal...

For Servicing the Timing Belt, Chains, Head Gaskets or Other Valve Train Repairs on Ford, Mercury and Mazda Vehicles. The kit comes with an aluminu...

T-27 Torx Bit 1/4" Drive. Heat Treated Alloy Steel.

16560. VALVE SPRING COMPRESSOR FOR GM LS. Works on Most GM LS-Type Engines. Allows removal of the valve spring without removing the rocker stand or...

Quickly Drives Seals Without Damage. Sixteen adapters for seals up to 3 3/8" diameter. Includes special adapters for "shielded" seals. 24810 2-7/16...

Axel Nut Socket may work on other vehicles with 2.97" O.D. Axle nut. Fullfloating hubs are held on with a circular nut that is engaged by the 9 pin...

Removes Broken Exhaust Manifold Bolts on Ford 4.6L, 5.4L and 6.8L V10 2 Valve and 3 Valve Ford Triton Engines Without Damaging the Cylinder Head. T...

H.D. END CAP WRENCH SET, 21 PC.

Helps Remove and Install Fuel Filters on 5.9 Liter Cummins Engines. Use the low profile, 29mm socket on the raised hex on the fuel filter housing. ...

END CAP FILTER WRENCH 84MM - 14 FLUTES

O-RING

Holds Door Glass While Working on Window Regulator. Works on all cars and trucks with a top door frame. Simply loop cable over door frame and attac...

88.4MM/15 FLUTES

Works on many applications. Removes, trims and installs clip-on wheel weights. Also includes lever and offset flat tip for removing wheel covers.

Removes and Installs Axle Nuts on 4WD Axle Hubs on Toyota / Lexus SUV Models. Durable, impact-grade heat-treated alloy steel. Extra deep to fit ove...

High Leverage Allows One-Hand Operation. Exceptionally strong, rigid frame, weighs only 6 lbs. Works with nearly all valve-in head and L-head engin...

Tests Spark Plugs, Spark Plug Wires and Coils Without Puncturing the Wire. With the engine running, place the grooved end of the tool over the plug...

Comes with Two Easy-To-Set Cutter Wheels for Quick Cleaning of Grooves. Heavy coil spring holds cutter in groove for fast removal of carbon. Tool c...

3/16INDRILL BUSHING

BULB

Comes in Handy Storage Case. 42150 Standard Set includes 12 heat-treated alloy steel hex keys: .050, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"...

Gives a Visual Check of Spark Energy for Coil On Plug or Standard Ignition Systems. Connect the tool between the spark plug and the plug wire. The ...

11450. REPLACEMENT BLADE for a 11420 Hose Cutter.

Fits Most Class 8 Over the Road Trucks and Trailers and Some Medium Duty Trucks. Use the tapered driver side for bearing races and the flat side fo...

Easily Removes Trim Panel Fasteners. Specially designed double tapered tips slide under the clip and grip the side of the clip, helping prevent dam...

35800. ALUMINUM DISCONNECT SET. 6 PC. Durable Aluminum Disconnects Work on Air Conditioning Lines and Quick Connect Fuel Lines. Disconnect spring l...

A durable plastic tank for testing tubes and tires. The tank features reinforcement ribs for extra support. Will handle passenger tire sizes to wid...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems. 5"...

2 or 4 Jaw Reversible & Adjustable 5 Ton Puller or 3 Jaw Reversible & Adjustable 5 Ton Puller. 5-1/2" Reach and 7" Spread.

Wrench is used to remove and install fuel filter elements on 3.2L Diesel Ford Transit engines. Works on 2015 to current 150, 250, and 350 models. T...

80220 LONG HOSE REMOVER Replacement for Kit of Five Hose Removers with Many Uses. (Pick). Contains long and short, standard and offset hooks. Can b...

13290 28MM LOW PROFILE FUEL FILTER SOCKET. Application: 2010-2018, 6.7L Dodge Cummins fuel filter cannister.

Strong and impact resistant when used to pry against trim or metal body panels. Used for all types of trim removal including side molding, window t...

Hold or Turn Flywheels and Flexplates on Most Vehicles. Use this special wrench to turn the flywheel and rotate the engine. Also holds the flywheel...

50310. SWIVEL JOINT. For the 50350 Side Winder Air Hose Reel.

Complete Multimeter Kit for Electronic Applications. Interchangeable probes permit wider range of testing possibilities. Compatible with most multi...

61660. End Cap Oil Filter Wrench. All End Cap Filter Wrenches are 3/8" drive. 86mm - 16 flutes.

Seven 1/4" Hex Insert Bits with 1/4" Drive Bit Holder. T-10 Through T-40. Fits tamper-resistant Torx® fasteners found on radio mountings, exterior ...

DISCONNECTS FUEL LINE AND EVAP LINE FITTINGS WITH TABS THE MUST BE DEPRESSED TO DISENGAGE. LOW-PROFILE DESIGN WITH 85° BEND ALLOWS THE TOOL TO FIT ...

Double-Ended Tools Designed to Remove Corrosion in Blade Fuse Applications on Both Mini and ATO Sizes. Combines a puller for removing the blade fus...

30180. No.2 PHILLIPS BIT