Tools > Specialty Hand Tools

Installs Most Truck Wheel Studs in Seconds. Use with an impact wrench or ratchet. The tool body is equipped with a thrust bearing to easily pull th...

Stretches Pipe up to 4-1/4" Including Stainless Steel. Use with an impact wrench to quickly stretch pipes. Collet sets expand pipes from 1-5/8" to ...

Adjustable Probes fit all Electronic Fuel Injection Systems. Versatile tool tests throttle body injectors, ported fuel injectors and sequential cen...

Translucent (see through) polyethylene material enables the user to read the liquid level on the container. Marked in both quarts and liters. The f...

Makes it Easy to Remove and Replace Springs. A spring tool for removing and replacing brake return springs that are set over a post. Heat-treated e...

Brake Spring ForkEasily Removes and Replaces the S-Cam Return Spring. The tip design cradles the return spring to keep it from sliding off. Heat tr...

Spark Plug Wire/Fuse Puller Also Pulls Cartridge Fuses. Plier jaws are made to pull spark plug boots from different angles. The double-ended tool a...

Holds Time Chain & Gear in Place on Ecotec Engines Holds the Timing Chain & Gear in place while removing or installing water pump on Ecotec...

30190. No.4 PHILLIPS BIT

NO. 4 TAP SOCKET

Adjustable Jaws Fit All Clamp Sizes for Easy Removal and Installation. This tool removes and installs flat band hose clamps used on heater and radi...

240 Grit Replacement Stones Replacement stones and pins. For use after re-boring only. Not for glaze breaking.

70600. TAP SOCKET No.5. From the 70500 Tap Socket Set.

Heavy-Duty Tool. 18520 is used to replace worn out tie rods and to separate shock absorber links. The tine opening is 21/32".

60760. 6MM TRIPLE SQUARE BIT. From the 60850 Triple Square Set.

Includes a Support to Help Prevent Slipping. The tool includes our standard 45900 Hood Prop plus a support to help prevent the bottom of the tool f...

61640. End Cap Oil Filter Wrench. All End Cap Filter Wrenches are 3/8" drive. 68MM - 14 FLUTES.

61530. End Cap Oil Filter Wrenches. All End Cap Filter Wrenches are 3/8" drive. 82mm - 15 flutes.

Water and Air Cleaning In One Wand for High Efficiency Cooling Systems on Large Industrial Equipment.50 inch XL wand for hard to reach places. Pate...

Channel design on body allows 2 interchangeable sets of legs to adjust to fit rings from 4" to 7-1/4" and keeps the drive centered. Works on the sm...

500 GRIT STONE SET

16440. STONE SET. 80 Grit. For the 16000 Small Cylinder Hone.

Hands-Free Filling on Threaded Valve Cover Openings. Two-piece design can be used separately or threaded together for a long super funnel. The larg...

63830. 61-124MM 3 JAW OIL FILTER WRENCH WITH ADAPTER. Removable Adapter Provides Lower Clearance in Tight Spots. Use with 3/8" or 1/2" Square Drive...

LED Bulb Lasts For Up to 100,000 Hours. Flexible wire works around obstructions and holds the shape you give it. White light brightly illuminates e...

Adjustable Lug Nut Cover RemoverUsed When Removing Chrome Lug Nut Caps Found On Heavy-Duty Trucks, Trailers And Motor Homes. Plastic coated jaws pr...

New Larger Torx Bit Size. Fits the torque converter drain plug on 2003 and later Subaru Legacy, Forester, Impreza and brake rotor retaining bolts o...

Set of Seven Disconnect Tools for Spring Lock Connectors on A/C and Fuel Lines Found on Many Chrysler and Ford Vehicles. The tools are colour coded...

40200. 3/8" MAGNETIC SOCKET HOLDERS (RED). Organizes 3/8" Fractional and Metric Sockets. Twenty-eight socket compartments that allow you to keep yo...

CURVED HOSE CLAMP PLIERS

1/2" Drive T-55 Torx Bit. Made of heat-treated alloy steel.

80290. Double Offset Short Hose Remover. Can be used to remove pipes, moldings, clips, clamps, gaskets, o-ring pins, gaskets, Handles are Double ma...

15520. STONE & WIPER SET. 280 Grit. Lisle cylinder hone replacement components allow you to extend your range of use for your standard or small...

Helpful when removing any type of interior trim including door panels and dash pieces. Used when replacing glass, installing stereo equipment, body...

12mm Triple Square Bit

Compresses Dual Brake Pistons Simultaneously. Squeeze the tool handle until the plunger contacts the inboard brake pad. Continue squeezing to compr...

For GM 3300 And 3800 V6 Cylinder Engines. The 45300 is equipped with the special bolts and adapters to pull the harmonic balancer cleanly without d...

Head Adjusts to 5 Positions. Two hook sizes easily remove most oil and grease seals. Where clearance is a problem, remove the pin to reposition the...

Includes Two New Adapters for Volvo and Chrysler/Dodge/Jeep. Helps eliminate oil spills when refilling crankcases, especially those with baffle val...

STETHOSCOPE W/ MAG HOLDER

16460. Designed for use with 2.35 in. to 2.75 in. cylinder hones only. Lisle cylinder hone replacement components allow you to extend your range of...

For Hand Lapping Valves. Thick handles for easy lapping. Has 5/8" and 13/16" diameter cups for smaller valves. 21220 13/16" Replacement Cup 21230 5...

Removes and Installs Pressed on Power Steering, Alternator and Air Pump Pulleys WITHOUT SLIPPING. The unique puller body completely houses the pull...

BULB & SPRING ASS'Y

Removes rust, scale, paint and solder from metal surfaces. Also great for cleaning threads and files. Brush has 5 1/2" of densely packed wire brist...

Allows the Engine Crank to Be Manually Adjusted. Works on Paccar MX-13 engines, found on Kenworth and Peterbilt trucks. Can be used to make sure th...