Lippert Components (744)

An axle hanger is a component that gets welded to the chassis in order to mount the axles and axle components. One hole axle hanger 2.448" W x 1.94...

Standard use on 2,000 to 3,500 lbs. capacity axles. Replacement Round Spindle Washer for use in wheel end replacements. Replaces: Dexter 005-027-00...

Standard use on 1" spindles with a flat side, which are commonly found on 3,500 lbs. and under capacity axles. Replacement Spindle Washer. For use ...

Replacement wheel lug stud. Stud size: 1/2"-20 x 2". For 3,500-7,000-lb. brake hubs. For 2,000-3,500-lb. idler hubs. Need a replacement wheel lug s...

Inner Bearing Cone for 5, 200 to 8,000 lbs. Axle Hubs. Industry number: 25580. Pairs with inner bearing race. 5, 200 to 8,000 lbs. weight capacity ...

Fits axles with a 2-3/8" tube and capacity up to 3,500 lbs. U-bolt diameter of 1/2"-20 and overall length of 5-1/8".Replaces: Dexter 011-021-00 | C...

Standard use in combination with 1/2" U-bolts, which are typically used to mount 2-3/8" axle tubes to the spring suspension system.Replaces: Dexter...

Standard use on almost all 1" spindles, which are commonly found on 3,500 to 8,000 lbs. capacity axles. Replacement Spindle Nut. For use in 3,500 l...

Industry number: L68149. Pairs with inner bearing race. 3,500 lbs. weight capacity. Lippert strongly recommends replacing bearing cones and races t...

Replacement shoulder bolt used for suspension hardware for axles. Shoulder length: 2.325". Overall length: 2.875". Thread size: 7/16-20. Body diame...

Standard use in combination with 7/16" U-bolts, which are typically used to mount 3" axle tubes to the spring suspension system.Replaces: Dexter 00...

STANDARD 2.25IN SHACKLE LINKReplaces: Dexter 018-011-01 | Cross references are not a guarantee that the part will fit any specific application. Che...

This bearing is used as both the inner and outer race based on axle weight capacity Inner Race: Fits 2,000 lbs. Axle. HubOuter Race: Fits 2,000 to ...

Replacement, heavy-duty shackle link for RV suspensionSize: 2.25"Connects suspension springs and axle hangersMeasured by width from center hole to ...

Replacement bolt to attach axle hanger to leaf spring. Integrated zerk for easy lubrication. Shoulder length: 2.825". Overall length: 3.74". Thread...

Replacement bolt to attach axle hanger to leaf spring. Integrated zerk for easy lubrication. Shoulder length: 2.325"Overall length: 2.883"Thread si...

Lippert Components highly suggests you replace the bearing race if you replace the bearing cone. Please consult your original equipment before purc...

Shield bearings, grease, and other inner hub components from dust and contaminants. Replacement dust caps for standard axle hubs are identified by ...

Shackle links, also called shackle straps, connect suspension springs and axle hangers. They are measured by width from center hole to center hole....

Weight Capacity: 2,500 lbs. Standens Leaf Spring Number: 72-20. Load Length: 24". Spring Layer Count: 4. Shock Compatible: No. Eye To Eye Length: 2...

Fits 9/16"-18 lug studs. Common replacement for 6,000 to 8,000-lb. capacity. Replace a damaged or missing lug nut on your trailer wheel hubs with t...

Replacement shoe and lining kit is compatible with Lippert™ electric brake assemblies. Pads are fully bonded to shoes for long life and more brakin...

Lippert Components Electric Brake Magnet Kit are the industry standard. Please consult your original equipment before purchasing. Be sure to inspec...

Replacement shoe and lining kit is compatible with Lippert™ electric brake assemblies. Available for 10" x 2.25" or 12" x 2" assemblies. Pads are f...

Adjustment Screw Brake Kit fits Lippert 10 inch x 1-1/2 inch, 10 inch x 2-1/4 inch hydraulic and electric and 12 inch x 2 inch electric brakes. Thi...

Lippert Components Electric Brake Magnet Kit are the industry standard. Please consult your original equipment before purchasing. Be sure to inspec...

Specifications: Inner / Outer Bearing Cones: Inner cone: Fits 2,000-lb. axle hubs, Outer cone: Fits 2,000 to 3,500-lb. axle hubs, Industry number: ...

The Lippert trailer bearing replacement kit offers an essential solution for maintaining smooth operation and longevity of 3,500-lb. trailer axle h...

The Lippert trailer bearing replacement kit offers an essential solution for maintaining smooth operation and longevity of 5,200-lb. trailer axle h...

The Lippert trailer bearing replacement kit offers an essential solution for maintaining smooth operation and longevity of 6,000-lb. trailer axle h...

The Lippert trailer bearing replacement kit offers an essential solution for maintaining smooth operation and longevity of 7,000-lb. trailer axle h...

The Lippert dust cap replacement kit offers an essential solution for maintaining smooth operation and longevity of 7,000 to 8,000-lb. trailer axle...

This is a replacement rubber insert for your axle hub dust cap. This product is available in singles or packs of (10). Please reference your origin...

This is a replacement 6-pack of 1/2"-20 x 2" wheel lug studs for use on axles with a weight capacity from 2,000 to 7,000 lbs. Please consult your o...

This is a replacement 4-pack of 9/16"-18 x 2.31" wheel lug studs for use on axles with a weight capacity from 5,200 to 7,000 lbs. Please consult yo...

This is a 2-pack of replacement shaft oil seals that fit Lippert and Dexter 5,200 to 8,000-lb. trailer axle hubs with oil or grease lubrication. No...

This is a 2-pack of replacement wheel end oil seals that fit Lippert and Dexter 10,000-lb. trailer axle hubs with oil or grease lubrication. Note: ...

This is a 2-pack of replacement wheel end oil seals that fit Lippert and Dexter 12,000 to 16,000-lb. trailer axle hubs with oil or grease lubricati...

The Lippert 1.5" round spindle nut retainer kit is for 10,000-lb. axle hubs and comes with a 6-slot castle nut, round spindle washer and cotter pin.

This is a 2-pack of replacement double lip grease seals that fit Lippert and Dexter 2,200-lb. trailer axle hubs with grease lubrication. Note: To a...

This is a replacement 2-pack of double lip grease seals that fit Lippert and Dexter 3,500 to 4,400-lb. trailer axle hubs with grease lubrication. N...

The Lippert 1" round spindle nut retainer kit is for 3,500-8,000-lb. axle hubs and comes with a 6-slot castle nut, round spindle washer and cotter ...

The Lippert 1" D-flat spindle nut retainer kit is for axle hubs and comes with a 6-slot castle nut, D-flat spindle washer and tang spindle washer. ...

This is a replacement 2-pack of dust caps for use on axles with a weight capacity between 2,000 and 3,500 lbs. Dust caps shield bearings, grease, a...

This is a replacement 2-pack of dust caps for use on axles with a weight capacity between 5,200 to 6,000 lbs. Dust caps shield bearings, grease, an...

This is a replacement 2-pack of dust caps for use on axles with a weight capacity between 7,000 to 8,000 lbs. Dust caps shield bearings, grease, an...