Lubrication Equipment

With ball check and hex nut on body end. Fits over grease fittings. 6,000 psi. 1/8” NPT Coupler. For light to medium duty applications. 10 per pack...

The new heavy duty design for the 64/65mm diameter 14 flutes oil filter canisters has been improved by adding heat-treated metal disc to the drive ...

133078-1 Switch Mounting Bracket is used for fuel transfer pump.

Wet Seal Kit, Includes Motor Shaft Seal and O-Rings for Strainer Coverplate, Gear Coverplate and Bypass Poppet.

The lever action design of our heavy duty grease guns facilitate accurate control of grease flow. Fitted with a 6” steel curved extension pipe and ...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1688, Thread: 1/8" National Pipe Thread, Overall Length: 7/8" (22.6mm),...

A Heavy-Duty, Heat Treated Alloy Steel Yoke and Strong Web Strap. Use with 1/2" drive to remove or install filters and other objects up to 6-1/2" i...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1641, Thread: 1/4" - 28, Overall Length: 1/2" (13.97mm), Shank Length: ...

4.125- 4.5(104.7 - 114.3mm) Range. Fits most tractors and other farm implement products. Tough, stainless steel band with permanently bonded textur...

Heavy-Duty Oil Filter Wrench 4-1/2" to 5-1/4". Wrenches are Designed for High Torque Requirements of Truck Filters and Used With 1/2" Square Drive ...

Can be mounted to almost any surface. Holds grease guns and suction guns with 2-1/4 In. barrel. Holds guns until ready to use. Not for use with CLR...

2.375- 2.625(60.3 - 66.7mm) Range. For small oil and fuel filters. Special narrow 1/2" band fits in tight spots. Tough, stainless steel band with p...

Robust design for easy draining and filling. Capacity: 17 oz. (500 cc). Complete with 12” vinyl hose for transmission and differential service. Pow...

Universal Bearing Packer with threaded center post for use with grease guns. The design incorporates a standard grease fitting at one end which eas...

17982. 4.5 GALLON OVAL DRAIN PAN, GREEN. New Drain Pan Design Provides 60% Larger Catch Area for Easier Fluid Draining. Smooth pan design is easy t...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2109, Type: Straight, Thread: M10 x 1, Overall Length (mm): 16, Quantit...

Thread - 1/8 In. NPT (m). Includes ball check. Enables hand guns to be loaded using filler pump method. Thread - 1/8 In. NPT (m) Includes ball chec...

Seamless steel body and brass pump mechanism. Durable enamel painted finish. Supplied with flexible and rigid metal spouts. Capacity: 24oz (700cc) ...

Seamless steel body and brass pump mechanism. Durable enamel painted finish. Supplied with flexible and rigid metal spouts. Capacity: 7oz (200cc) M...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2104, Type: 45°, Thread: M8 x 1, Overall Length (mm): 20.5, Quantity pe...

1/8 In. NPT. Knurled body. Hex base for proper installation and removal. 1/8 In. NPT Knurled body Hex base for proper installation and removal

The ball check in the head of the fitting prevents dirt and grit from getting into the bearing. The fittings have a specially formed lip at the fit...

Glass ball, stainless steel spring and 6’ of ethanol resistant hose. 2.5 Gallon/min. 1/2” high quality copper pump.Self-Priming Copper Pump

Large Pro Swivoil Filter Wrench. 180 Degree Swivel Action. Cushion Grip Dual Material Handle Provides Greater Comfort and Better Gripping Force. St...

Fits Filters from 2 1/2" to 3 1/8". Removes all oil filters from 2 1/2" to 3 1/8" in diameter. This extra large range enables the 63600 wrench to f...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2106, Type: Straight, Thread: M6 x 1, Overall Length (mm): 15, Quantity...

The lever action design of our heavy duty grease guns facilitate accurate control of grease flow. Fitted with a 6” steel curved extension pipe and ...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1641, Thread: 1/4" - 28, Overall Length: 1/2" (13.97mm), Shank Length: ...

Straight Handle Filter Wrench. 1" stainless steel band with special "teeth" grips tightly. Vinyl-covered handle provides firm, comfortable grip. *S...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 2111, Type: 90°, Thread: M10 x 1, Overall Length (mm): 21.4, Quantity p...

Medium Swivoil Filter Wrench. Wrenches are Made of High-Quality Steel With a Zinc-Plated Yoke and a Blackened Band for Resistance to Rust and Corro...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1610, Thread: 1/8" National Pipe Thread, Overall Length: 21/32" (17.52m...

Specially Designed Wrenches for Removing and Replacing the Main Filter Collar as well as the Vent Cap on Aftermarket Diesel Fuel Filter Systems. 6"...

PRESSURE SWITCH

Milton (S-3101) Pistol Grease Gun - High Pressure, High Volume Milton’s S-3101 Pistol Grease Gun and 18" High Pressure Hose Extension air bundle ki...

Utility Oil Drip Tray 24"x24"x5-1/2". HEAVY DUTY POLYETHYLENE CONSTRUCTION - BLACK COLOR. RUST OR CORROSION RESISTANT. NESTABLE FOR EASY STORAGE. F...

7,000 PSI Maximum Operating Pressure. Recessed straight extension with quick-connect locking sleeve. Length - 6 In. Includes extension nozzle and q...

2" to 5" Ratcheting Oil Filter Pliers. Pliers Cover a Complete Range of Filter Removal From 2" to 5" (50mm to 125mm) in Diameter. Ratchet and Lock ...

Fits 16 to 55-gallon drums. Delivery rate 10 Oz. per stroke. Includes standard bung bushing. Fits 16 to 55-gallon drums Delivery rate 10 Oz. per st...

Utility Oil Drip Tray 36"x24"x5-1/2". HEAVY DUTY POLYETHYLENE CONSTRUCTION - BLACK COLOR. RUST OR CORROSION RESISTANT. NESTABLE FOR EASY STORAGE. F...

Bag of 50 caps. Fits all standard grease fittings (SAE and Metric). Integrated collar slides onto the fitting, keeping the cap safely attached. Yel...

Reinforced rubber cover with steel wire braid. Working temperature: -40° to 95°C. Each grease hose is individually UPC barcode labeled inside a ful...

For tap repair of 1/8 In. damaged threads. For removal of 7/16 In. In. Hex, straight or angle fittings. For retapping holes for new fitting install...

Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1627, Thread: 1/4" National Pipe Thread, Overall Length: 15/16" (22.35m...

NO-SLIP FILTER WRENCH FOR JOHN DEERE, RANGE 4-3/4" - 5-3/16" TOUGH STAINLESS STEEL BAND WITH PERMANENTLY BONDED TEXTURED COATING FOR SUPERIOR GRIPP...

Use a drive-in grease fitting tool to tap into desired area. Tested to 8,000 PSI, 08F Carbon Steel. Zinc plated finish. Industry Number: 1743-B, Dr...

300 PSI Maximum Operating Pressure. Length - 2 In. Inlet 1/4 - 18 In. NPT. Operating temperature from -67 deg. F to +225 deg. F. Seal material - lo...