Lubrication Equipment

Easy-priming, high pressure, and European engineered, the LockNLube Easy-Prime Lever Grease Gun will change your idea of what a grease gun can be. ...

The LNL151 is a heavy-duty lever grease gun that delivers an ounce of grease in 28 strokes and up to 10,000 PSI. Holds 16 oz. bulk grease, or a sta...

Universal Bearing Packer with threaded center post for use with grease guns. The design incorporates a standard grease fitting at one end which eas...

Cast iron pump outlet body and handle provide durability and longevity. Baked enamel finish, powder coated steel drum cover. Smooth, easy pumping a...

Can be mounted to almost any surface. Holds grease guns and suction guns with 2-1/4 In. barrel. Holds guns until ready to use. Not for use with CLR...

Maximum output pressure 7,500 PSI. Will dispense 45 oz. or 80 cu. In. of NLGI 0 to 2 grease per minute at 150 PSI. Follower plate assures positive ...

GPI 906008-570, Automatic Diesel Shutoff Nozzle with 1 in. Inlet and 1 in. O.D. spout is designed to attach to a 1 in. fuel hose for safe, reliable...

GPI Pressure Vent Cap Assembly GPI Pressure Vent Cap Assembly GPI Pressure Vent Cap Assembly

Lincoln Model 84817 Wall Mount Bracket.

LINCOLN INDUSTRIAL 83938. STRAIGHT HIGH-PRESSURE GREASE SWIVEL FOR CONTROL VALVES & METERS. Configuration - Straight. Thread Size - 1/4" NPT(m)...

Style - straight swivel. Threads 1/2 in. - 27 (m) x 1/4 in. NPT (m). Max. working pressure 4500 PSI.

Fits 400 lb. or 55 gallon open top refinery containers for all series 20, 25 and 40 pumps.

Metric Grease Fit Assortment - 110pcMetric Grease Fit Assortment - 110pc

For Tapping 1/8 in.-28 Threads and Removal of 3/8 in. and 5/16 in. Hex Straight or Angle FittingsA combination tool used to remove worn or broken f...

640106 : Industrial-Style Couplers & Nipples for 3/8" ID (64 Series). Maximum operating pressure 250 psi. Maximum air flow 108 scfm at 100 psi....

Fits Filters from 3 1/8" to 3 7/8". The large range enables this wrench to fit most standard size filters. Steel jaws grip filter without slipping....

A Heavy-Duty, Heat Treated Alloy Steel Yoke and Strong Web Strap. Use with 1/2" drive to remove or install filters and other objects up to 6-1/2" i...

1,000 PSI Maximum Operating Pressure. Fits all standard 1/8 In. NPT grease hoses. Length - 5.4 In. 1,000 PSI Maximum Operating Pressure Fits all st...

5,000 PSI Maximum Working Pressure. 12,000 PSI Burst Pressure. Length - 13 In. Thread 1/8 In. NPT (m). 5,000 PSI Maximum Working Pressure 12,000 PS...

7,000 PSI Maximum Operating Pressure. Recessed straight extension with quick-connect locking sleeve. Length - 6 In. Includes extension nozzle and q...

3,500 PSI Maximum Lube Pressure. Provides a way to apply a long lasting lubricant into close-fitting areas. Allows access into difficult-to-reach a...

Allows operator to contact flush type or hard-to-reach hydraulic type fittings. 1/8 In. NPT (f) thread. Length - 2.76 In. Screw-on style. Use for h...

NO-SLIP FILTER WRENCH FOR JOHN DEERE, RANGE 4-3/4" - 5-3/16" TOUGH STAINLESS STEEL BAND WITH PERMANENTLY BONDED TEXTURED COATING FOR SUPERIOR GRIPP...

4.125- 4.5(104.7 - 114.3mm) Range. Fits most tractors and other farm implement products. Tough, stainless steel band with permanently bonded textur...

2.375- 2.625(60.3 - 66.7mm) Range. For small oil and fuel filters. Special narrow 1/2" band fits in tight spots. Tough, stainless steel band with p...

PLASTIC HOUSING MATERIAL. MAXIMUM DISCHARGE HEIGHT: 8 FEET. MAXIMUM FLOW RATE: 238 GPH. MAXIMUM SPEED RATING: 2,800 RPM. MAX PRESSURE: 3.6 PSI.

For pumping oil, ATF and gear oil. Proven horizontal, valved-piston motor design for simplicity and reliability. Provides quick dispense, fill or t...

6 Pc. Oil Canister Socket Set Service Kit. Low Profile Sockets for Better Access. .

Power Steering Pump Puller Set. Removes and Installs Power Steering Pump Pulleys Off Most Domestic Vehicles. .

3/8" & 1/2" Drive Heavy-Duty Oil Filter Strap Wrench. Strap is Made of High Strength Oil Resistant Nylon and Handle is Made of Forged Steel. Ch...

Zinc die cast head and adjusting flange. 18" zinc plated pump body. Epoxy coated, corrosion resistant 12" drum cover. Delivers 28 gms on 1 oz. / st...

Industrial quality. Brass pump. Electrostatic, corrosion resistant epoxy coating. Complete with flex hose and rigid spout

Single-shot and continuous delivery modes in one grease gun! Easily switch delivery mode with sliding selection lever.Single-shot and continuous de...

Includes most common SAE and metric grease fittings, two multi-tools, and 20 plastic caps to keep grease fittings clean and help them last longer. ...

Bag of 50 caps. Fits all standard grease fittings (SAE and Metric). Integrated collar slides onto the fitting, keeping the cap safely attached. Yel...

For tap repair of 1/8 In. damaged threads. For removal of 7/16 In. In. Hex, straight or angle fittings. For retapping holes for new fitting install...

Pump length 17.5 In. Fits 5 to 55 Gallon drums. Material: Plastic. Pump length 17.5 In. Fits 5 to 55 Gallon drums Material: Plastic

1/8 In. NPT (f) inlet. Jaws are fully hardened for extended service life. Hardened coupler body and swivel joints withstand high-pressure applicati...

Grip Grease Gun - 6000 PSI, Model No. G113 This Lincoln Pistol Grip Grease Gun features the convenience of cartridge OR suction loading. Plunger lo...

Air line lubricators are designed to meter precise amounts of lubricant into the air supply, improving the efficiency of cylinders, valves and air ...

24 assorted grease fittings in six popular sizes blister-packed on one card. The ball check in the head of the fitting prevents dirt and grit from ...

Handle Swivels to Clear Obstructions. Features the swivel handle, gripper "teeth" and 1" wide stainless steel band. The swivel handle makes it easy...

Alemite 90° Adapters are used to adapt a threaded fitting to a different size opening thread. 1/4”-28 Taper Thread (SAE-LT)(m) - 90°, Swivel - 1/8”...

Buyers Products Taper Thread Grease Fittings feature a 1/4 in.-28 tapered thread to seal in the grease. They install into a standard 1/4 in.-28 str...